Oxidation reactions metal catalyzed

Silver can mediate oxidation reactions and has shown unique reactivity. In a few cases, namely, nitrene-, carbene-, and silylene-transfer reactions, novel reactivity was found with homogeneous silver catalysts. Some of these reactions are uniquely facilitated by silver, never having been reported with other metals. While ligand-supported silver catalysts were extensively utilized in enantioselective syntheses as Lewis acids, disappointingly few cases were reported with oxidation reactions. Silver-catalyzed oxidation reactions are still underrepresented. Silver-based catalysts are cheaper and less toxic versus other precious metal catalysts. With the input of additional effort, this field will undoubtedly give more promising results. 

Many industrially important selective oxidation reactions are catalyzed by transition metal oxides. The activity of such catalysts is related to the reducibility of the transition metal ion, which enables the bulk oxide lattice to participate actively in the redox processes present in the Mars van Krevelen mechanism. Unfortunately, NMR spectroscopic investigations are severely limited by the occurrence of paramagnetic oxidation states. As a general rule, NMR signals from atoms bearing unpaired electron spins cannot be detected by conventional methtxls, and the spectra of atoms nearby are often severely broadened. For this reason, most of the work published in this area has dealt with diamagnetic vanadium(V) oxide-based catalysts. 

Although liquid-phase oxidations of alkanes can be carried out even in the absence of any metal derivative (the role of an inihator of chain radical process can be played by a non-metal compound), derivahves of transition metals are often used in these reactions. Metal-catalyzed autoxidation will be considered in Chapter IX. 

This chapter focuses on the subset of these reactions that have been studied most intensively and that draw from the stoichiometric reactions presented earlier in this text. Thus, the first sections of this chapter highlight certain aspects of hydrocyanation, hydrosilylation, disilylation, hydroboration, diboration, silylborations, and hydroami-nation. The last section presents aspects of palladium-catalyzed oxidation and metal-catalyzed oxidative amination of olefins. 

Oxidation Reactions. Metal oxides are effective catalysts for the total or deep oxidation reactions. Consideration of the types of total oxidation reactions that are catalyzed by metal oxides leads to three general classifications. These... 

Rueping M, Koenigs RM, Poschamy K, Fabry DC, Leonori D, Vila C (2012) Dual catalysis crunbination of photocatalytic aerobic oxidation and metal catalyzed alkynylation reactions—C-C bond formation using visible light. Chem Eur J 18 5170-5174... 

Formaldehyde is readily reduced to methanol by hydrogen over many metal and metal oxide catalysts. It is oxidized to formic acid or carbon dioxide and water. The Cannizzaro reaction gives formic acid and methanol. Similarly, a vapor-phase Tischenko reaction is catalyzed by copper (34) and boric acid (38) to produce methyl formate ... 

The radicals are then involved in oxidations such as formation of ketones (qv) from alcohols. Similar reactions are finding value in treatment of waste streams to reduce total oxidizable carbon and thus its chemical oxygen demand. These reactions normally are conducted in aqueous acid medium at pH 1—4 to minimize the catalytic decomposition of the hydrogen peroxide. More information on metal and metal oxide-catalyzed oxidation reactions (Milas oxidations) is available (4-7) (see also Photochemical technology, photocatalysis). 

Basic oxides of metals such as Co, Mn, Fe, and Cu catalyze the decomposition of chlorate by lowering the decomposition temperature. Consequendy, less fuel is needed and the reaction continues at a lower temperature. Cobalt metal, which forms the basic oxide in situ, lowers the decomposition of pure sodium chlorate from 478 to 280°C while serving as fuel (6,7). Composition of a cobalt-fueled system, compared with an iron-fueled system, is 90 wt % NaClO, 4 wt % Co, and 6 wt % glass fiber vs 86% NaClO, 4% Fe, 6% glass fiber, and 4% BaO. Initiation of the former is at 270°C, compared to 370°C for the iron-fueled candle. Cobalt hydroxide produces a more pronounced lowering of the decomposition temperature than the metal alone, although the water produced by decomposition of the hydroxide to form the oxide is thought to increase chlorine contaminate levels. Alkaline earths and transition-metal ferrates also have catalytic activity and improve chlorine retention (8). 

Transition-metal-catalyzed oxidations may or may not proceed via peroxocomplexes. Twelve important industrial organic oxidation processes catalyzed by transition metals, many of which probably involve peroxo intermediates, have been tabulated (88). Even when peroxo intermediates can be isolated from such systems, it does not necessarily foUow that these are tme intermediates in the main reaction. 

Metal-Catalyzed Oxidation. Trace quantities of transition metal ions catalyze the decomposition of hydroperoxides to radical species and greatiy accelerate the rate of oxidation. Most effective are those metal ions that undergo one-electron transfer reactions, eg, copper, iron, cobalt, and manganese ions (9). The metal catalyst is an active hydroperoxide decomposer in both its higher and its lower oxidation states. In the overall reaction, two molecules of hydroperoxide decompose to peroxy and alkoxy radicals (eq. 5). 

Joining two heteroatoms to a ring by radical combination is not presently a common route to heterocycles. It might become more important if the art of metal-catalyzed redox reactions keeps advancing at the present pace. Current examples are the conversion of 1,5-dithiols to 1,2-dithiepanes by oxidants such as FeCla, and the oxidation of 1,3-propane-bis-hydrazines to 1,2,3,4-tetrazepines (Sections 5.18.4.1 and 5.18.10.1). 

For the reactions of other 1,3-dipoles, the catalyst-induced control of the enantio-selectivity is achieved by other principles. Both for the metal-catalyzed reactions of azomethine ylides, carbonyl ylides and nitrile oxides the catalyst is crucial for the in situ formation of the 1,3-dipole from a precursor. After formation the 1,3-di-pole is coordinated to the catalyst because of a favored chelation and/or stabiliza-... 

The first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes was reported by Ukaji et al. [76, 77]. Upon treatment of allyl alcohol 45 with diethylzinc and (l ,J )-diisopropyltartrate, followed by the addition of diethylzinc and substituted hydroximoyl chlorides 46, the isoxazolidines 47 are formed with impressive enantioselectivities of up to 96% ee (Scheme 6.33) [76]. 

Zinc-tartrate complexes were applied for reactions of both nitrones and nitrile oxides with allyl alcohol and for both reaction types selectivities of more than 90% ee were obtained. Whereas the reactions of nitrones required a stoichiometric amount of the catalyst the nitrile oxide reactions could be performed in the presence of 20 mol% of the catalyst. This is the only example on a metal-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrile oxides. It should however be no-... 

Modern variants are the enzyme-catalyzed and the transition-metal-catalyzed Baeyer-Villiger reaction, allowing for an oxidation under mild conditions in good yields, with one stereoisomer being formed predominantly in the enzymatic reaction ... 

Compared with the related reactions of tutrones, there have only appeared a few pnbhcacions of metal-assisted or metal-catalyzed 1,3-dipolar cycle additions of nltnle oxides This Is due to... 

Besides the oxidative and transition-metal-catalyzed condensation reactions discussed above, several other syntheses were developed to generate PPP and PPP derivatives. 

Pyrolyses of formates, oxalates and mellitates yield CO and C02 (H2, H20 etc.) as the predominant volatile products and metal or oxide as residue. It is sometimes possible to predict the initial compositions from thermodynamic considerations [94], though secondary reactions, perhaps catalyzed by the solids present, may result in a final product mixture that is very different. The complex mixtures of products (hydrocarbons, aldehydes, ketones, acids and acid anhydrides) given [1109] by reactants containing larger organic groupings makes the collection of meaningful kinetic data more difficult, and this is one reason why there are relatively few rate studies available for the decompositions of these substances. 

In low density reactant compacts, the reaction is believed to involve gas phase oxygen diffusion whereas under conditions of improved contact, in high-density material, the mobile species is identified as Fe2+. The metal catalyzes decomposition of the oxidant (KMn04), an effect that is inhibited by small quantities of certain additives (e.g. NaF). There is a large and specialist literature devoted to self-heating reactions. 

Olefin metathesis is the transition-metal-catalyzed inter- or intramolecular exchange of alkylidene units of alkenes. The metathesis of propene is the most simple example in the presence of a suitable catalyst, an equilibrium mixture of ethene, 2-butene, and unreacted propene is obtained (Eq. 1). This example illustrates one of the most important features of olefin metathesis its reversibility. The metathesis of propene was the first technical process exploiting the olefin metathesis reaction. It is known as the Phillips triolefin process and was run from 1966 till 1972 for the production of 2-butene (feedstock propene) and from 1985 for the production of propene (feedstock ethene and 2-butene, which is nowadays obtained by dimerization of ethene). Typical catalysts are oxides of tungsten, molybdenum or rhenium supported on silica or alumina [ 1 ]. 

---