Zinc tartrate

Zinc-tartrate complexes were applied for reactions of both nitrones and nitrile oxides with allyl alcohol and for both reaction types selectivities of more than 90% ee were obtained. Whereas the reactions of nitrones required a stoichiometric amount of the catalyst the nitrile oxide reactions could be performed in the presence of 20 mol% of the catalyst. This is the only example on a metal-catalyzed asymmetric 1,3-dipolar cycloaddition of nitrile oxides. It should however be no-... 

One of the earliest useful methods for asymmetric opening of meso-epoxides with sulfur-centered nucleophiles was reported by Yamashita and Mukaiyama, who employed a heterogeneous zinc tartrate catalyst (Scheme 7.10) [20]. Epoxides other than cydohexene oxide were not investigated, and the enantioselectivity depended strongly on the identity of the thiol. 

Some cadmium compounds, including simple salts, were revealed to be excellent catalysts for the enantiosymmetric polymerisation of propylene sulphide [156,157], For instance, the proportion of isotactic diads in the polypropylene sulphide) sample obtained in polymerisation with the cadmium (7 )-tartrate catalyst was more than 95%, higher than the 69% which was characteristic of a polymer sample prepared using the zinc (i )-tartrate catalyst [158]. The superior stereoselectivity of the cadmium (i )-tartrate catalyst is also borne out by the more effective separation into fractions having opposite optical rotations of the polypropylene sulphide) yielded by cadmium tartrate, compared with that yielded by zinc (i )-tartrate. Note the quite different behaviour of these two catalysts in terms of their stereoelectivity in the polymerisation of propylene sulphide only very slight optical activity was found for the polypropylene sulphide) sample prepared using cadmium tartrate, whereas that associated with the polymer sample obtained with zinc tartrate was found to have a much higher value [158]. 

Polymers containing 8-hydroxyquinoline appear to be selective adsorbents for tungsten in alkaline brines (95). In the presence of tartrate and citrate, quinaldic acid [93-10-7] allows the separation of zinc from gallium and indium (96). Either of these compounds can selectively separate lead and zinc from oxide ores as complexes (97). It is also possible to separate by extraction micro quantities of rhenium(VII), using quinoline in basic solution (98). The... 

Electroplating. Aluminum can be electroplated by the electrolytic reduction of cryoHte, which is trisodium aluminum hexafluoride [13775-53-6] Na AlE, containing alumina. Brass (see COPPERALLOYS) can be electroplated from aqueous cyanide solutions which contain cyano complexes of zinc(II) and copper(I). The soft CN stabilizes the copper as copper(I) and the two cyano complexes have comparable potentials. Without CN the potentials of aqueous zinc(II) and copper(I), as weU as those of zinc(II) and copper(II), are over one volt apart thus only the copper plates out. Careful control of concentration and pH also enables brass to be deposited from solutions of citrate and tartrate. The noble metals are often plated from solutions in which coordination compounds help provide fine, even deposits (see Electroplating). 

This colour change can be observed with the ions of Mg, Mn, Zn, Cd, Hg, Pb, Cu, Al, Fe, Ti, Co, Ni, and the Pt metals. To maintain the pH constant (ca 10) a buffer mixture is added, and most of the above metals must be kept in solution with the aid of a weak complexing reagent such as ammonia or tartrate. The cations of Cu, Co, Ni, Al, Fe(III), Ti(IV), and certain of the Pt metals form such stable indicator complexes that the dyestuff can no longer be liberated by adding EDTA direct titration of these ions using solochrome black as indicator is therefore impracticable, and the metallic ions are said to block the indicator. However, with Cu, Co, Ni, and Al a back-titration can be carried out, for the rate of reaction of their EDTA complexes with the indicator is extremely slow and it is possible to titrate the excess of EDTA with standard zinc or magnesium ion solution. 

D. Benzoin-a-oxime (cupron) (VII). This compound yields a green predpitate, CuC14Hu02N, with copper in dilute ammoniacal solution, which may be dried to constant weight at 100 °C. Ions which are predpitated by aqueous ammonia are kept in solution by the addition of tartrate the reagent is then spedfic for copper. Copper may thus be separated from cadmium, lead, nickel, cobalt, zinc, aluminium, and small amounts of iron. 

H. 8-Hydroxyquinaldine (XI). The reactions of 8-hydroxyquinaldine are, in general, similar to 8-hydroxyquinoline described under (C) above, but unlike the latter it does not produce an insoluble complex with aluminium. In acetic acid-acetate solution precipitates are formed with bismuth, cadmium, copper, iron(II) and iron(III), chromium, manganese, nickel, silver, zinc, titanium (Ti02 + ), molybdate, tungstate, and vanadate. The same ions are precipitated in ammoniacal solution with the exception of molybdate, tungstate, and vanadate, but with the addition of lead, calcium, strontium, and magnesium aluminium is not precipitated, but tartrate must be added to prevent the separation of aluminium hydroxide. 

Sulphuric acid is not recommended, because sulphate ions have a certain tendency to form complexes with iron(III) ions. Silver, copper, nickel, cobalt, titanium, uranium, molybdenum, mercury (>lgL-1), zinc, cadmium, and bismuth interfere. Mercury(I) and tin(II) salts, if present, should be converted into the mercury(II) and tin(IV) salts, otherwise the colour is destroyed. Phosphates, arsenates, fluorides, oxalates, and tartrates interfere, since they form fairly stable complexes with iron(III) ions the influence of phosphates and arsenates is reduced by the presence of a comparatively high concentration of acid. 

Fluoride, in the absence of interfering anions (including phosphate, molybdate, citrate, and tartrate) and interfering cations (including cadmium, tin, strontium, iron, and particularly zirconium, cobalt, lead, nickel, zinc, copper, and aluminium), may be determined with thorium chloranilate in aqueous 2-methoxyethanol at pH 4.5 the absorbance is measured at 540 nm or, for small concentrations 0-2.0 mg L 1 at 330 nm. 

Catalytic properties of external chiral additives such as (2S,3/ )-4-dimethyl-amino-l,2-diphenyl-3- methyl-2-butoxide (A 16) (574, 575) and 2-magnesium-3-zinc salts of dialkyl (f ,f )-tartrate (A17) were employed in the highly stereoselective addition of organozinc reagents to derivatives of 3,4-dihydro-isoquinoline-A-oxide (Scheme 2.147) (576). 

One of the first attempts to extend polymer-assisted epoxidations to asymmetric variants were disclosed by Sherrington et al. The group employed chiral poly(tartrate ester) hgands in Sharpless epoxidations utilizing Ti(OiPr)4 and tBuOOH. However, yields and degree of stereoselection were only moderate [76]. In contrast to most concepts, Pu and coworkers applied chiral polymers, namely polymeric binaphthyl zinc to effect the asymmetric epoxidation of a,/9-unsaturated ketones in the presence of terPbutyl hydroperoxide (Scheme 4.11). 

Most linear celluloses may be dissolved in solvents capable of breaking the strong hydrogen bonds. These solutions include aqueous solutions of inorganic acids, calcium thiocyanate, zinc chloride, lithium chloride, ammonium hydroxide, iron sodium tartrate, and cadmium or copper ammonium hydroxide (Schweitzer s reagent). The product precipitated by the addition of a nonsolvent to these solutions is a highly amorphous, regenerated cellulose. 

Chlorpromazine formed an insoluble 1 1 complex with lead picrate, and 5 3 complexes with the picrates of cadmium, copper, and zinc [70]. The sample (0.1 g) was dissolved in 15 mL of 95% ethanol, and the solution adjusted to pH 9 with 0.1 N NaOH. After adding 25 mL of a 0.02 M picrate reagent (30 mL of Pb), the solution was set aside for 2 hours. The precipitate was collected on a sintered glass fuimel, and the unconsumed metal in the filtrate was titrated directly with 0.02M EDTA at pH 10.4 (after adding 0.5 g of potassium sodium tartrate for Pb). Eriochrome black T was used as the indicator. 

The use of other metal cations such as those derived from zinc, lithium, or aluminium proved less effective (136). Treatment of allyl alcohol with diethyl zinc in the presence of a catalytic amount of diisopropyl (/ ,/ )-(+ )-tartrate (DIPT) in 1,4-dioxane, however, afforded the corresponding (5/f)-2-isoxazolines with excellent selectivity er >92 8) (178). Addition of dioxane was necessary in order to avoid precipitation of the complex of zinc salts containing the DIPT moiety. Without this solvent, lower stereoselectivity was found, probably due to the precipitation mentioned above, which prevents the favorable catalytic cycle proposed (Scheme 6.32) (178). 

Nonracemic tra s-2-[aryl(alkyl)thio]cyclohexanols with l/ ,2/ -configuration are prepared with modest to good enantioselectivity in high yield by reaction of 1,2-epoxycyclohexane with various thiols in dichloromethane at 25 °C catalyzed by zinc L-tartrate in a heterogeneous reaction103. 

Ammonium Oxalate Ammonium Oxalate Hydrate Ammonium Pentaborate Ammonium Pentaborate Tetrahydrate Ammonium Pentachlorozincate Ammonium Perchlorate Ammonium Peroxydisulfate Ammonium Persulfate Ammonium Phosphate Ammonium Phosphate, Dibasic Ammonium Rhodanate Ammonium Rhodanide Ammonium Silicofluoride Ammonium Stearate Ammonium Sulfamate Ammonium Sulfate Ammonium Sulfhydrate Solution Ammonium Sulfide Ammonium Sulfide Solution Ammonium Sulfite Ammonium Sulfocyanate Ammonium Sulfocyanide Ammonium Tartrate Ammonium Thiocyanate Ammonium Thiosulfate Ammonium Zinc Chloride Amorphous Phosphorus AMS... 

---