Phillips Triolefin Process

Olefin metathesis is the transition-metal-catalyzed inter- or intramolecular exchange of alkylidene units of alkenes. The metathesis of propene is the most simple example in the presence of a suitable catalyst, an equilibrium mixture of ethene, 2-butene, and unreacted propene is obtained (Eq. 1). This example illustrates one of the most important features of olefin metathesis its reversibility. The metathesis of propene was the first technical process exploiting the olefin metathesis reaction. It is known as the Phillips triolefin process and was run from 1966 till 1972 for the production of 2-butene (feedstock propene) and from 1985 for the production of propene (feedstock ethene and 2-butene, which is nowadays obtained by dimerization of ethene). Typical catalysts are oxides of tungsten, molybdenum or rhenium supported on silica or alumina [ 1 ]. 

As stated above, olefin metathesis is in principle reversible, because all steps of the catalytic cycle are reversible. In preparatively useful transformations, the equilibrium is shifted to one side. This is most commonly achieved by removal of a volatile alkene, mostly ethene, from the reaction mixture. An obvious and well-established way to classify olefin metathesis reactions is depicted in Scheme 2. Depending on the structure of the olefin, metathesis may occur either inter- or intramolecularly. Intermolecular metathesis of two alkenes is called cross metathesis (CM) (if the two alkenes are identical, as in the case of the Phillips triolefin process, the term self metathesis is sometimes used). The intermolecular metathesis of an a,co-diene leads to polymeric structures and ethene this mode of metathesis is called acyclic diene metathesis (ADMET). Intramolecular metathesis of these substrates gives cycloalkenes and ethene (ring-closing metathesis, RCM) the reverse reaction is the cleavage of a cyclo-... 

Classical metathesis such as that for the Phillips triolefin process (Eq. 3) or... 

Olefin metathesis was first observed in the 1950s, and was used in industry to convert propylene to a mixture of but-2-ene and ethylene. This Phillips Triolefin Process used an aluminum/molybdenum catalyst whose exact structure was unknown. 

The first large-scale application was the Phillips Triolefin Process (1966) in which propene was converted into ethene and 2-butene. Due to market changes the reverse process, in which propene is produced, became more attractive later. This process has been in operation since 1985. Another process is the Shell Higher Olefin Process (SHOP) in which ethene is oligomerized and the products are metathesized into detergent range olefins. The same company developed a process in speciality chemicals in which alpha-, omega-dienes are formed from cyclic alkenes. 

More than half a century ago it was observed that Re207 and Mo or W carbonyls immobilized on alumina or silica could catalyze the metathesis of propylene into ethylene and 2-butene, an equilibrium reaction. The reaction can be driven either way and it is 100% atom efficient. The introduction of metathesis-based industrial processes was considerably faster than the elucidation of the mechanistic fundamentals [103, 104]. Indeed the first process, the Phillips triolefin process (Scheme 5.55) that was used to convert excess propylene into ethylene and 2-butene, was shut down in 1972, one year after Chauvin proposed the mechanism (Scheme 5.54) that earned him the Nobel prize [105]. Starting with a metal carbene species as active catalyst a metallocyclobutane has to be formed. The Fischer-type metal carbenes known at the time did not catalyze the metathesis reaction but further evidence supporting the Chauvin mechanism was published. Once the Schrock-type metal carbenes became known this changed. In 1980 Schrock and coworkers reported tungsten carbene complexes... 

The reaction is applied in industrial processes (Phillips triolefin process. Shell higher olefin process) and has importance in ring opening-metathesis polymerization (ROMP) in polymer chemistry [1]. In the past, olefin metathesis was not commonly applied in organic synthesis [2] because of the reversibility of the reaction, leading to olefin mixtures. In contrast, industrial processes often handle product mixtures easily. In ROMP, highly strained cyclic olefins allow the equilibrium of the reaction to be shifted towards the product side. 

Phillips Triolefin Process Phillips ran from 1966-1972 propylene 15 kt/a ethylene-l-30 kt/a 2-butene WOg/SiOz 400°C... 

Metathesis is a versatile reaction that forms the basis for several important industrial processes, such as the Phillips triolefin process, which produces propene by cross-metathesis of 2-butene with ethene, and the Shell higher olefins process (SHOP), which involves a combination process that converts ethene to detergent-range olefins. Several interesting polymeric materials are commercially produced via the ROMP of different types of unsaturated cyclic monomers, including nor-bornene, cyclooctene, and dicyclopentadiene [1]. 

Commercialization of olefin metathesis was accomplished in 1966 (12), Shawinigan Chemical Ltd., at their Varennes complex near Montreal, Quebec, brought the Phillips Triolefin Process on stream. With an excess of propylene at that location,... 

Metathesis of mono- and diolefins can be performed with both homogeneous and heterogeneous catalysis. The most important processes involving metathesis steps, the SHOP process and the Phillips triolefin process, are based on heterogeneous catalysts. Homogeneous catalysts are used in the ring opening metathesis of norbor-nene (Norsorex, CDF-Chemie) and cyclooctene (Vestenamer, Hills) [7]. 

Having traversed some of the key events in the history of olefin metathesis, it is now appropriate to discuss some of the resultant fruits of that early labor in the form of practical applications in organic synthesis. Since the general reaction was bom in the industrial sector, we felt it appropriate to commence with some examples of commercial processes. Among several of the profitable industrial procedures that benefit from olefin metathesis, one of the oldest is the Phillips triolefin process (Scheme 7a) which utilizes a molybdenum-based catalyst system to convert propene (17) into a mixture of 2-butene (18) and ethene (19). These products are then used as monomers for polymer synthesis as well as for general use in petroleum-related applications. The reverse reaction can also be employed to prepare propene for alternative uses. 

Scheme 7. Industrial olefin metathesis applications the Phillips triolefin process for the production of butene and ethene (a) and the Norsorex process for the ring-opening metathesis polymerization (ROMP) of norbornene (b).

For organic chemists, the term metathesis is used most often to mean alkene or olefin metathesis. This process, which can be catalysed by a range of transition metals, was discovered accidentally in the petrochemical industry. Its first commercial application was in the Phillips triolefin process in which propene was converted to an equilibrium mixture of ethene, 2-butene and the starting propene at 400 °C in the presence of an unknown tungsten species (Scheme 8.51). The process was in use between 1966 and 1972. Interestingly, with changes in feedstock prices and demands, the process is now run in reverse, producing propene from ethene and 2-butene. 

This process, called OCT (olefin conversion technology), formerly the Phillips Triolefin Process, which utilizes a heterogeneous catalyst system, was originally developed by Phillips Petroleum Co. for the conversion of propene into ethene and butene. The reaction takes place in a fixed-bed reactor over a mixture of the metathesis catalyst W03/S102 and the isomerization catalyst MgO at temperatures above 540 K and an overall pressure of approximately 30 bar [3]. 1-Butene present in the feedstock is isomerized to 2-butene as the original 2-butene is consumed in the metathesis reaction. 

Metathesis can be catalyzed homogeneously and heterogeneously. The biggest applications of metathesis such as the SHOP process [4] and Phillips Triolefin process use heterogeneous catalysts. Norbornene (Norsorex by CdF Chimie), cyclooctene (Vestenamer by Hiils AG), and dicyclopenta-diene (Hercules) practice homogeneous catalysis. 

Applied on an industrial scale [4], this reaction, the Phillips triolefin process, is carried out in a tubular reactor with a fixed bed of catalyst containing cobalt molybdate. Separation of the reaction products is effected by fractionation and subsequent distillation (Fig. 1). 

When highly pure propene is not available commercially, it can be prepared by the reverse metathesis reaction of ethene and 2-butene [Eq. (1)]. The process is performed either at high temperatures (150-350°C) in the gas phase, over molybdenum or tungsten catalysts (Phillips triolefin process) [4], or at low temperatures (50°C) in the liquid phase, in the presence of rhenium-based catalysts (IFP-CPC process) [13], The raw material may be either ethene and the C4 fraction available from the hydroisomerization unit (previously submitted to an isomerization step to maximize its 2-butene content) or ethene alone, which, before admission to the metathesis unit, is partly dimerized to 1-butene, then isomerized to 2-butene in separate units. The process is useful in the event of a high demand for propene, since the C4 fraction is readily available from a cracking unit. 

---