Oxidation Lubrication Oils

Uses Preparation of propylene and dipropylene glycols, poly (propylene oxide), lubricants, oil demulsifiers, surfactants, isopropanol amines, polyols for urethane foams solvent soil sterilant fumigant. 

Organophosphorus Derivatives. Neopentyl glycol treated with pyridine and phosphorus trichloride in anhydrous dioxane yields the cycHc hydrogen phosphite, 5,5-dimethyl-l,3-dioxaphosphorinane 2-oxide (2) (32,33). Compounds of this type maybe useful as flameproofing plasticizers, stabilizers, synthetic lubricants, oil additives, pesticides, or intermediates for the preparation of other organophosphoms compounds (see Flame retardants Phosphorus compounds). 

Practically all lubricating oils contain at least one additive some oils contain several. The amount of additive that is used varies from < 0.01 to 30% or more. Additives can have detrimental side effects, especially if the dosage is excessive or if interactions with other additives occur. Some additives are multifimctional, eg, certain VI improvers also function as pour-point depressants or dispersants. The additives most commonly used in hydrautic fluids include pour-point depressants, viscosity index improvers, defoamers, oxidation inhibitors, mst and corrosion inhibitors, and antiwear compounds. 

In the other market areas, lead naphthenates are used on a limited basis in extreme pressure additives for lubricating oils and greases. Sodium and potassium naphthenates are used in emulsiftable oils, where they have the advantage over fatty acid soaps of having improved disinfectant properties. Catalyst uses include cobalt naphthenate as a cross-linking catalyst in adhesives (52) and manganese naphthenate as an oxidation catalyst (35). Metal naphthenates are also being used in the hydroconversion of heavy petroleum fractions (53,54) and bitumens (55). 

The phosphonate esters, HP(=0(OR)2, of alkylated phenols are used extensively as lubricating-oil additives to control bearing corrosion and oxidation, and to impart antimst properties as stabilizers, as antioxidants (qv) and flame retardants in plastics, as specialty solvents, and as intermediates (see Corrosion AND corrosion control Heat stabilizers). 

Neutral aqueous salt solutions react slowly with tin when oxygen is present but oxidizing salt solutions, such as potassium peroxysulfate, ferric chloride and sulfate, and aluminum and stannic chlorides dissolve tin. Nonaqueous organic solvents, lubricating oils, and gasoline have Httle effect. 

Oxidized castor oils are excellent nonmigrating, nonvolatile plasticizers (qv) for ceUulosic resins, poly(vinyl butyral), polyamides, shellac, and natural and synthetic mbber (see Rubber, natural). The high viscosity products are also used as tackifiers in gasket compounds and adhesives (qv) because of good oil and solvent resistance. They also serve as excellent pigment grinding media and as a base for inks (qv), lubricating oils, and hydrauHc oils (62). 

Polyisobutylene has the chemical properties of a saturated hydrocarbon. The unsaturated end groups undergo reactions typical of a hindered olefin and are used, particularly in the case of low mol wt materials, as a route to modification eg, the introduction of amine groups to produce dispersants for lubricating oils. The in-chain unsaturation in butyl mbber is attacked by atmospheric ozone, and unless protected can lead to cracking of strained vulcanizates. Oxidative degradation, which leads to chain cleavage, is slow, and the polymers are protected by antioxidants (75). 

Universal at 100° F) and a viscosity index of 95. They contain necessary oxidation inhibitors and antiwear agents, as the same oil is used for bearings and gear lubrication. Oils tend to retain water, either from steam condensation or from condensation that occurs in the tanks. The presence of water is detrimental as it encourages the for-... 

Lube oil extraction plants often use phenol as solvent. Phenol is used because of its solvent power with a wide range of feed stocks and its ease of recovery. Phenol preferentially dissolves aromatic-type hydrocarbons from the feed stock and improves its oxidation stability and to some extent its color. Phenol extraction can be used over the entire viscosity range of lube distillates and deasphalted oils. The phenol solvent extraction separation is primarily by molecular type or composition. In order to accomplish a separation by solvent extraction, it is necessary that two liquid phases be present. In phenol solvent extraction of lubricating oils these two phases are an oil-rich phase and a phenol-rich phase. Tne oil-rich phase or raffinate solution consists of the "treated" oil from which undesirable naphthenic and aromatic components have been removed plus some dissolved phenol. The phenol-rich phase or extract solution consists mainly of the bulk of the phenol plus the undesirable components removed from the oil feed. The oil materials remaining... 

Fires have often occurred when air is compressed. Above 140°C, lubricating oil oxidizes and forms a carbonaceous deposit on the walls of air compressor delivery lines. If the deposit is thin, it is kept cool by conduction through the pipework. But when deposits get too thick, they can catch fire. Sometimes the delivery pipe has gotten so hot that it has burst or the aftercooler has been damaged. In one case the fire vaporized some of the water in the aftercooler and set up a shock wave, which caused serious damage to the cooling-water lines. 

Methyl ethyl ketone may also he produced hy the catalyzed dehydrogenation of sec-hutanol over zinc oxide or brass at about 500°C. The yield from this process is approximately 95%. MEK is used mainly as a solvent in vinyl and acrylic coatings, in nitrocellulose lacquers, and in adhesives. It is a selective solvent in dewaxing lubricating oils where it dissolves the oil and leaves out the wax. MEK is also used to synthesize various compounds such as methyl ethyl ketone peroxide, a polymerization catalyst used to form acrylic and polyester polymers and methyl pentynol by reacting with acetylene ... 

Oxidation of lubricating oil can result in lacquer deposits, metal corrosion, or thickening of the oil. Most lubricants contain oxidation inhibitors. However when additives are used up, oxidation of the oil itself begins. The quantity of oxidation in an oil sample is measured by differential infrared analysis. 

Rust and oxidation inhibited oils EP lubricants Viscosity (40° o ... 

Reconditioning is the removal of contaminants and oxidation products (at least in part) but not previously incorporated additives. It may also involve the addition of new oil and/or additives to adjust the viscosity and/or performance level. This process is sometimes referred to as laundering or reclamation . The method treats used lubricating oil to render it suitable for further service, either in the original or a downgraded application. Two types of treatment are generally employed. 

---