Olefin rhodium-catalyzed

Dubbaka, S.R. and Vogel, P. (2005) Palladium-catalyzed desulfitative Mizoroki-Heck couplings of sulfonyl chlorides with mono- and disubstituted olefins rhodium-catalyzed desulfitative Heck-type reactions under phosphine- and base-free conditions. Chem. Eur. J., 11, 2633-41. 

Dubbaka, S.R. and Vogel, P. (2005) Palladium-catalyzed desulfltative Mizoroki-Heck coupling of sulfonyl chlorides with mono- and disubstituted olefins rhodium-catalyzed desulfitative Heck-type reactions under phosphine- and base-free conditions. Chem. Eur. J., 11, 2633 1. Kamigata, N., Ozaki, J.-i., and Kobayashi, M. (1985) Reaction of alkenesulfonyl chlorides with olefins catalyzed by a ruthenium(ll) complex. A novel method for synthesis of ( , )- ,4-diaryl-... 

The stringency of the conditions employed in the unmodified cobalt 0x0 process leads to formation of heavy trimer esters and acetals (2). Although largely supplanted by low pressure ligand-modified rhodium-catalyzed processes, the unmodified cobalt 0x0 process is stiU employed in some instances for propylene to give a low, eg, - 3.3-3.5 1 isomer ratio product mix, and for low reactivity mixed and/or branched-olefin feedstocks, eg, propylene trimers from the polygas reaction, to produce isodecanol plasticizer alcohol. 

Conventional triorganophosphite ligands, such as triphenylphosphite, form highly active hydroformylation catalysts (95—99) however, they suffer from poor durabiUty because of decomposition. Diorganophosphite-modified rhodium catalysts (94,100,101), have overcome this stabiUty deficiency and provide a low pressure, rhodium catalyzed process for the hydroformylation of low reactivity olefins, thus making lower cost amyl alcohols from butenes readily accessible. The new diorganophosphite-modified rhodium catalysts increase hydroformylation rates by more than 100 times and provide selectivities not available with standard phosphine catalysts. For example, hydroformylation of 2-butene with l,l -biphenyl-2,2 -diyl... 

In conclusion, many chiral pyridine-based ligands have been prepared from the chiral pool and have been successfully tested as ligands for the copper- or rhodium-catalyzed cyclopropanation of olefins. Alfhough efficient systems have been described, sometimes leading interestingly to the major cis isomer, the enantioselectivities usually remained lower than those obtained with the copper-bis(oxazoline) system. 

Sumi K, Kumobayashi H (2004) Rhodium/Ruthenium Applications. 6 63-96 Suzuki N (2005) Stereospecific Olefin Polymerization Catalyzed by Metallocene Complexes. 8 177-215... 

Our approach is to use the inexpensive ligands that are already used industrially as well as conventional solvents. The goal of this project is to develop a thermomorphic approach to the rhodium-catalyzed hydroformylation of higher olefins (>Ce) that enhances conversion rates and ease of product recovery while minimizing catalyst degradation and loss. 

Rhodium catalyzed carbonylations of olefins and methanol can be operated in the absence of an alkyl iodide or hydrogen iodide if the carbonylation is operated in the presence of iodide-based ionic liquids. In this chapter, we will describe the historical development of these non-alkyl halide containing processes beginning with the carbonylation of ethylene to propionic acid in which the omission of alkyl hahde led to an improvement in the selectivity. We will further describe extension of the nonalkyl halide based carbonylation to the carbonylation of MeOH (producing acetic acid) in both a batch and continuous mode of operation. In the continuous mode, the best ionic liquids for carbonylation of MeOH were based on pyridinium and polyalkylated pyridinium iodide derivatives. Removing the highly toxic alkyl halide represents safer, potentially lower cost, process with less complex product purification. 

Historically, the rhodium catalyzed carbonylation of methanol to acetic acid required large quantities of methyl iodide co-catalyst (1) and the related hydrocarboxylation of olefins required the presence of an alkyl iodide or hydrogen iodide (2). Unfortunately, the alkyl halides pose several significant difficulties since they are highly toxic, lead to iodine contamination of the final product, are highly corrosive, and are expensive to purchase and handle. Attempts to eliminate alkyl halides or their precursors have proven futile to date (1). 

Hydroamination of olefins under most catalytic conditions proceed with Markovnikov addition of the N-H bond across the olefin. Shown below is a rhodium-catalyzed intramolecular, anti-Markovnikov, hydroamination developed for the synthesis of 3-arylpiperidines 167 <06JA6042>. Further evaluation of this reaction as a synthesis of multisubstituted piperidines revealed that substrates with substituents a or y to the amino group did not produce the expected piperidine, however, substrates with a substituent (1 to the amino group produce piperidines in high yield. 

The reaction rates of various types of olefins follow much the same pattern with both cobalt- and rhodium-catalyzed systems. Wender and co-workers (47) classified the nonfunctional substrates as straight-chain terminal, internal, branched terminal, branched internal, and cyclic olefins. The results they obtained are given in Table III. 

Brookhart s group has reported a related rhodium-catalyzed olefin insertion. To gain insight into the mechanism of this process, labeling studies were carried out under conditions where no coupling product was observed ( H NMR study at 80 °C). Deuterium loss occurred in both meta- and para-sites of the aromatic group, and deuterium incorporation was observed in the olefin (Equation (95)).89... 

Directed rhodium-catalyzed Michael-type additions have recently ketimines with functionalized olefins (Equation (100)).94... 

A recyclable system for the directed rhodium-catalyzed hydroacylation of olefins was reported using a homogeneous phenol and 4,4 -dipyridyl solvent system at 150 °C. High yields were obtained even after eight cycles and the ketone product was obtained after decantation (Equation (132)).115... 

A titanium-mediated amination followed by a directed rhodium-catalyzed C-H functionalization of an olefinic C-H leads to heterocycles (Equation (184)).149... 

Recently, a rhodium-catalyzed tandem cyclization has been reported with an arylboronic ester bearing a pendant Michael-type acceptor olefin and acetylenic65 or olefinic66 derivatives. This transformation proceeds in a water-containing medium as solvent and proton source. This catalyst system is optimized with electron-rich and bulky ligands to stabilize the rhodium intermediate and decrease the protonolysis of boron derivatives in a protic solvent. 

The first example of asymmetric rhodium-catalyzed 1,4-addition of organoboron reagents to enones was described in 1998 by Hayashi and Miyaura. Significant progress has been made in the past few years. This asymmetric addition reaction can be carried out in aqueous solvent for a broad range of substrates, such as a,/ -unsaturated ketones, esters, amides, phosphonates, nitroalkenes. The enantioselectivity is always very high (in most cases over 90% ee). This asymmetric transformation provides the best method for the enantioselective introduction of aryl and alkenyl groups to the / -position of these electron-deficient olefins. 

Zhang54 published the first and only account of a non-asymmetric rhodium-catalyzed Alder-ene cycloisomerization of 1,6-enynes.55 The conditions developed by Zhang and co-workers are advantageous in that, similar to the ruthenium conditions developed by Trost, selectivity for 1,4-diene products is exhibited. The rhodium conditions are dissimilar from many other transition metal conditions in that only (Z)-olefins give cycloisomerization products. 

It took another decade however before the idea of developing a rhodium-catalyzed olefin hydroboration process came to fruition. This occurred in 1985 when Mannig and Noth reported the first examples of such a process.8 They discovered that Wilkinson s catalyst 2 was effective for the addition of catecholborane 1 to a range of alkenes and alkynes, as exemplified by cyclopentene 4 (Scheme 2). 

Shortly after the key mechanistic papers on rhodium-catalyzed hydroboration, Marks reported a hydroboration reaction catalyzed by lanthanide complexes that proceeds by a completely different mechanism.63 Simple lanthanide salts such as Sml3 were also shown to catalyze the hydroboration of a range of olefins.64 The mechanism for this reaction was found to be complex and unknown. As in other reactions catalyzed by lanthanides, it is proposed that the entire catalytic cycle takes place without any changes in oxidation state on the central metal. 

Table 36.3 Use of mixtures of monodentate phosphonites and or phosphites in the rhodium-catalyzed hydrogenation of substituted olefins.3 ...

Optically active aldehydes are important precursors for biologically active compounds, and much effort has been applied to their asymmetric synthesis. Asymmetric hydroformylation has attracted much attention as a potential route to enantiomerically pure aldehyde because this method starts from inexpensive olefins and synthesis gas (CO/H2). Although rhodium-catalyzed hydrogenation has been one of the most important applications of homogeneous catalysis in industry, rhodium-mediated hydroformylation has also been extensively studied as a route to aldehydes. 

A rhodium-catalyzed allenic Alder ene reaction effectively provides cross-conjugated trienes in very good yields (Scheme 16.70) [77]. The reaction most likely involves ft -hydride elimination of an intermediate rhodium metallacycle to afford an appending olefin and ensuing reductive elimination of a metallohydride species to give the exocyclic olefin. 

Conventionally, organometallic chemistry and transition-metal catalysis are carried out under an inert gas atmosphere and the exclusion of moisture has been essential. In contrast, the catalytic actions of transition metals under ambient conditions of air and water have played a key role in various enzymatic reactions, which is in sharp contrast to most transition-metal-catalyzed reactions commonly used in the laboratory. Quasi-nature catalysis has now been developed using late transition metals in air and water, for instance copper-, palladium- and rhodium-catalyzed C-C bond formation, and ruthenium-catalyzed olefin isomerization, metathesis and C-H activation. Even a Grignard-type reaction could be realized in water using a bimetallic ruthenium-indium catalytic system [67]. 

Starting from longer-chain olefins means high boiling points of the products, and hence distillation at higher temperatures and vacuum. These demanding conditions cannot be met by the modern rhodium-catalyzed processes. 

Hydroformylation of hetero olefins such as carbonyl compounds is not known to proceed with significant levels of efficiency, whereas the hydroformylation of olefins has been developed to a sophisticated stage. Generally, aldehydes resultant from the latter process exhibit a low propensity to undergo further hydroformylation, with the exception of some activated aldehydes. The rhodium-catalyzed hydroformylation of formaldehyde is the key step in the synthesis of ethyleneglycol from synthesis gas. Chan et al. found... 

Rhodium-catalyzed biphasic hydroformylation of olefins. The Ruhrchemie-Rhone Poulenc process for manufacturing... 

---