Trimer-esters

The stringency of the conditions employed in the unmodified cobalt 0x0 process leads to formation of heavy trimer esters and acetals (2). Although largely supplanted by low pressure ligand-modified rhodium-catalyzed processes, the unmodified cobalt 0x0 process is stiU employed in some instances for propylene to give a low, eg, - 3.3-3.5 1 isomer ratio product mix, and for low reactivity mixed and/or branched-olefin feedstocks, eg, propylene trimers from the polygas reaction, to produce isodecanol plasticizer alcohol. 

May JJ, Wendrich TM, Mahariel MA (2001) The dhb Operon of Bacillus subtilis Encodes the Biosynthetic Template for the Catecholic Siderophore 2,3-Dihydroxybenzoate-glycine-threonine Trimeric Ester Bacillibactin. J Biol Chem 276 7209... 

These trimer-esters are extremely slow to dissociate and require elevated te 115)6ratures at boillng-acld conditions to conqilete the reactions. Tars are produced with release of sulfur dioxide. 

Itydrolysis has been used in some aicld. regeneration systems but the accumulation of excessive amounts of trimer-esters and tars have an adverse effect on alkylate quality. 

Is nil. As reaction conditions deteriorate and alkylate quality decreases, the rate of dimer and trimer ester formation increases. Ester production, relative to alkylate quality, is shovm by Figure 3 Generally ester production from feed contaminants is more difficult to predict. Data obtained from commercial operations and plotted in Figure 4, show the combined effect of ester production from these two sources. 

By the action of ethyl iodide on the tri- and tetrasilver salts of the appropriate phosphonitrilic acids, Ratz and Hess (61) have prepared the ethyl esters of the iV-ethyl phosphonitrilates (EtN PO(OEt))3,4. The trimeric ester is a crystalline compound which forms a dihydrochloride. 

ArIhrobaciKns. Glycolipid antibiotic complex formed by an Arthrobacter sp. No. 2967 and stored in the cells. A. represent cyclic trimeric esters of long-chain 3-()S-D-galactopyranosyloxy)-fatty acids which. 

Acryhc esters dimerize to give the 2-methylene glutaric acid esters catalyzed by tertiary organic phosphines (37) or organic phosphorous triamides, phosphonous diamides, or phosphinous amides (38). Yields of 75—80% dimer, together with 15—20% trimer, are obtained. Reaction conditions can be varied to obtain high yields of trimer, tetramer, and other polymers. 

The general formula for boric acid esters is B(OR)2. The lower molecular weight esters such as methyl, ethyl, and phenyl are most commonly referred to as methyl borate [121 -43-7] ethyl borate [130-46-9J, and phenyl borate [1095-03-0] respectively. Some of the most common boric acid esters used in industrial appHcations are Hsted in Table 1. The nomenclature in the boric acid ester series can be confusing. The lUPAC committee on boron chemistry has suggested using trialkoxy- and triaryloxyboranes (5) for compounds usually referred to as boric acid esters, trialkyl (or aryl) borates, trialkyl (or aryl) orthoborates, alkyl (or aryl) borates, alkyl (or aryl) orthoborates, and in the older Hterature as boron alkoxides and aryloxides. CycHc boric acid esters, which are trimeric derivatives of metaboric acid (HBO2), are known as boroxines (1). 

Reaction between butadiene and CO2 has been extensively studied (171) since the reaction was first demonstrated (167—170). This reaction has been shown to be catalyzed by Pd (172,173), Ni (174), Ru (175), Pt (178), and Rh (172,173) catalysts. Products include gamma (5) and delta lactones (6), acids (7,8), and esters (9). Mechanistic studies have shown that butadiene initially forms a dimer (Pd, Ru, Ni) or trimer (Rh) intermediate followed by CO2 insertion (171). The fate of these intermediates depends on the metal, the ligands, and the reaction conditions. 

The monoisobutyrate ester of TMPD, Texanol, or Filmer IBT, formally an isobutyraldehyde trimer, is prepared in a single step from isobutyraldehyde or, alternatively, by the esterification of TMPD with isobutyric acid. This monoester is most commonly employed as a coalescing agent for latex-based paints and water-based ink formulations. 

AEyl chloride reacts with sodamide in Hquid ammonia to produce benzene when sodamide is in excess, hexadiene dimer is the principal product, with some trimer and tetramer (C24, six double bonds). AEylation at carbon atoms alpha to polar groups is used in the preparation of a-aEyl-substituted ketones and nittiles. Preparation of P-diketone derivatives, methionic acid derivatives, and malonic ester, cyanoacetic ester, and P-keto-ester derivatives, etc, involving substitution on an alpha carbon between two polar carbonyl groups, is particularly facEe. 

This type of cement has been further improved by the substitution of -hexyl van ill ate [84375-71-3] and similar esters of vanillic acid [121 -34-6] and/or syringic acid [530-57 ] for eugenol (93—95). These substituted cements are strong, resistant to dissolution, and, unlike ZOE and EBA cements, do not inhibit the polymerization of resin-base materials. Noneugenol cements based on the acid—base reaction of zinc and similar oxides with carboxyhc acids have been investigated, and several promising types have been developed based on dimer and trimer acids (82). 

Calcium Chelates (Salicylates). Several successhil dental cements which use the formation of a calcium chelate system (96) were developed based on the reaction of calcium hydroxide [1305-62-0] and various phenohc esters of sahcyhc acid [69-72-7]. The calcium sahcylate [824-35-1] system offers certain advantages over the more widely used zinc oxide—eugenol system. These products are completely bland, antibacterial (97), facihtate the formation of reparative dentin, and do not retard the free-radical polymerization reaction of acryhc monomer systems. The principal deficiencies of this type of cement are its relatively high solubihty, relatively low strength, and low modulus. Less soluble and higher strength calcium-based cements based on dimer and trimer acid have been reported (82). 

Currently, there is continuing work on an iadustry standard method for the direct determination of monomer, dimer, and trimer acids. Urea adduction (of the methyl esters) has been suggested as a means of determining monomer ia distilled dimer (74). The method is tedious and the nonadductiag branched-chain monomer is recovered with the polymeric fraction. A micro sublimation procedure was developed as an improvement on urea adduction for estimation of the polymer fraction. Incomplete removal of monomer esters or loss of dimer duriag distillation can lead to error (75). 

Thin-layer chromatography (76,77) has been used for the estimation of the amounts of dimer, trimer, and monomer ia methyl esters. Both this method and paper chromatography are characterized by lack of precision (78,79) (see Chromatography). 

Lipase-catalyzed intermolecular condensation of diacids with diols results in a mixture of macrocycUc lactones and liuear oligomers. Interestingly, the reaction temperature has a strong effect on the product distribution. The condensation of a,(D-diacids with a,(D-dialcohols catalyzed by Candida glindracea or Pseudomonas sp. Upases leads to macrocycUc lactones at temperatures between 55 and 75°C (91), but at lower temperatures (<45°C) the formation of oligomeric esters predorninates. Optically active trimers and pentamers can be produced at room temperature by PPL or Chromobacterium viscosum Upase-catalyzed condensation of bis (2,2,2-trichloroethyl) (+)-3-meth5ladipate and 1,6-hexanediol (92). 

The main use of acrolein is to produce acrylic acid and its esters. Acrolein is also an intermediate in the synthesis of pharmaceuticals and herhicides. It may also he used to produce glycerol hy reaction with isopropanol (discussed later in this chapter). 2-Hexanedial, which could he a precursor for adipic acid and hexamethylene-diamine, may he prepared from acrolein Tail to tail dimenization of acrolein using ruthenium catalyst produces trans-2-hexanedial. The trimer, trans-6-hydroxy-5-formyl-2,7-octadienal is coproduced. Acrolein, may also he a precursor for 1,3-propanediol. Hydrolysis of acrolein produces 3-hydroxypropionalde-hyde which could he hydrogenated to 1,3-propanediol. ... 

The cyanurate ring is formed hy the trimerization of the cyanate ester. 

Transfer constants of the methacrylate macromonomers in MMA polymerization do not depend on the ester group but are slightly higher for MAA trimer. Compounds 72 and 73 are derived from the MMA trimer (67) by selective hydrolysis or hydrolysis and reesterification respectively. They offer a route to telechelic polymers. 

Glycine and its esters also readily form isolable trimeric HHT derivatives. These interme ates have also been successfully utilized in constructing the glyphosate backbone when they have sufficient thermal stability to tolerate the reaction conditions. For example, good overall yields of GLYH3 were obtained under similar conditions with the stable HHT of sodium glycinate 24 via the phosphonate diester 14b (30). 

PPF catalyzed an enantioselective polymerization of bis(2,2,2-trichloroethyl) tra 5-3,4-epoxyadipate with 1,4-butanediol in diethyl ether to give a highly optically active polyester (Scheme 9). °° The molar ratio of the diester to the diol was adjusted to 2 1 to produce the (-) polymer with enantiomeric purity of >96%. The polymerization of racemic bis(2-chloroethyl) 2,5-dibromoadipate with excess of 1,6-hexanediol using lipase A catalyst produced optically active trimer and pentamer. The polycondensation of 1,4-cyclohexanedimethanol with fumarate esters using PPL catalyst afforded moderate diastereoselectivity for the cis/trans monocondensate and markedly increased diastereoselectivity for the dicondensate product. 

Synthetic fire-resistant fluids have been developed to replace petroleum-based fluids for many applications. Although there are several types of these less hazardous fluids, the only synthetic fluids discussed in this profile are phosphate esters and polyalphaolefins. The phosphate esters are tertiary esters of orthophosphoric acid, 0=P(0H)3, and may be triaryl, trialkyl, and alkyl/aryl. The polyalphaolefins are usually based on 2-decene and contain a mixture of oligomers (dimers, trimers, etc.). 

On the other hand, numerous examples are already known in which monomeric metaphosphoric esters are generated by thermolysis reactions. Most worthy of mention in this context is the gas phase pyrolysis of the cyclic phosphonate 150 which leads via a retro-Diels-Alder reaction to butadiene and monomeric methyl metaphosphate (151) 108,109, no). While most of the phosphorus appears as pyrophosphate and trimeric and polymeric metaphosphate, a low percentage (<5%) of products 152 and 153 is also found on condensation of the pyrolyzate in a cold trap containing diethylaniline or N,N,N, N,-tetraethyl-m-phenylene-diamine. The... 

Enzymatic enantioselective oligomerization of a symmetrical hydroxy diester, dimethyl /Lhydroxyglutarate, produced a chiral oligomer (dimer or trimer) with 30-37% ee [24]. PPL catalyzed the enantioselective polymerization of e-substituted-e-hydroxy esters to produce optically active oligomers (DP < 6) [25]. The enantioselectivity increased with increasing bulkiness of the monomer substituent. Optically active polyesters with molecular weight of more than 1000 were obtained by the copolymerization of the racemic oxyacid esters with methyl 6-hydroxyhexanoate. 

---