Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aldehydes optically active

Catalytic Enantioselective Alkylation of Aldehydes with Dialkylzincs . The chiral M,M-dialkylnorephedrines, analogs of (1), are highly efficient catalysts for the enantioselective addition of dialkylzincs to aliphatic and aromatic aldehydes. Optically active aliphatic and aromatic secondary alcohols with high ee are obtained using N,fV-dialkylnorephedrines (4-6 mol%) as chiral catalyst precursors. When (lS,2/J)-MN-dialkylnorephedrine is used as a chiral catalyst precursor, prochi ral aldehydes are attacked at the si face to afford (S)-alcohols (when the priority order is R >R2)(eq7). [Pg.415]

Enamines as nucleophiles react with butadiene, and a-octadienyl ketones or aldehydes are obtained after hydrolysis[57]. This is a good way of introducing an octadienyl group at the o-position of ketones or aldehydes, because butadiene does not react with ketones or aldehydes directly. The reaction of the pyrrolidine enamine of cyclohexanone gives, after hydrolysis, 2-(2,7-octadie-nyOcyclohe.xanone (58) as the main product, accompanied by a small amount of 2,6-di(2,7-octadienyl)cyclohexanone. The reaction of the optically active enamine 59 with butadiene gave 2-(2,7-octadienyl)cyclohexanone (60) in 72% ce[58]. [Pg.432]

If the a carbon atom of an aldehyde or a ketone is a chnality center its stereo chemical integrity is lost on enolization Enolization of optically active sec butyl phenyl ketone leads to its racemization by way of the achiral enol form... [Pg.768]

As shown for the aldotetroses an aldose belongs to the d or the l series accord mg to the configuration of the chirality center farthest removed from the aldehyde func tion Individual names such as erythrose and threose specify the particular arrangement of chirality centers within the molecule relative to each other Optical activities cannot be determined directly from the d and l prefixes As if furns ouf bofh d eryfhrose and D fhreose are levorofafory buf d glyceraldehyde is dexfrorofafory... [Pg.1030]

Simple olefins do not usually add well to ketenes except to ketoketenes and halogenated ketenes. Mild Lewis acids as well as bases often increase the rate of the cyclo addition. The cycloaddition of ketenes to acetylenes yields cyclobutenones. The cycloaddition of ketenes to aldehydes and ketones yields oxetanones. The reaction can also be base-cataly2ed if the reactant contains electron-poor carbonyl bonds. Optically active bases lead to chiral lactones (41—43). The dimerization of the ketene itself is the main competing reaction. This process precludes the parent compound ketene from many [2 + 2] cyclo additions. Intramolecular cycloaddition reactions of ketenes are known and have been reviewed (7). [Pg.474]

Ketene can also be added to trihalosubstituted aldehydes or ketones (12) to form 4-trihalomethyloxetanones. If this addition is performed in the presence of optically active bases such as quinine [130-95-0] chiral lactones are obtained (41,42). [Pg.477]

Benzyloxy-2-fluoro-2-methylpropionaIdehyde was prepared in optically active form from (5)-monoethyl 2-fluoro-2-methylmalonate, which had itself been prepared by enzymatic hydrolysis A number of enol silyl ethers or enolates were added to the aldehyde in processes that occur with fair to good diastereoselectivity [6] (equation 6) (Table 2)... [Pg.615]

Sharpless and Masumune have applied the AE reaction on chiral allylic alcohols to prepare all 8 of the L-hexoses. ° AE reaction on allylic alcohol 52 provides the epoxy alcohol 53 in 92% yield and in >95% ee. Base catalyze Payne rearrangement followed by ring opening with phenyl thiolate provides diol 54. Protection of the diol is followed by oxidation of the sulfide to the sulfoxide via m-CPBA, Pummerer rearrangement to give the gm-acetoxy sulfide intermediate and finally reduction using Dibal to yield the desired aldehyde 56. Homer-Emmons olefination followed by reduction sets up the second substrate for the AE reaction. The AE reaction on optically active 57 is reagent... [Pg.59]

Recently, the Michael addition of the optically active Q ,y-disubstituted tetronic acids 146c,e with a variety of Q ,/3-unsaturated aldehydes, ketones, esters, and nitriles was studied (Scheme 53) (99H1321). [Pg.140]

Danishefsky et al. were probably the first to observe that lanthanide complexes can catalyze the cycloaddition reaction of aldehydes with activated dienes [24]. The reaction of benzaldehyde la with activated conjugated dienes such as 2d was found to be catalyzed by Eu(hfc)3 16 giving up to 58% ee (Scheme 4.16). The ee of the cycloaddition products for other substrates was in the range 20-40% with 1 mol% loading of 16. Catalyst 16 has also been used for diastereoselective cycloaddition reactions using chiral 0-menthoxy-activated dienes derived from (-)-menthol, giving up to 84% de [24b,c] it has also been used for the synthesis of optically pure saccharides. [Pg.163]

The diastereoselectivity is observed in the Henry reaction using optical active niti o compounds or a-heteroatom substituted aldehydes. Lor example, the reaction of O-benzyl-D-lactal-dehyde with methyl 3-niti opropionate in the presence of neubal alumina leads to a mixture of three niti o-aldol products from which D-ribo isomer is isolated by direct crystallization. D-Ribo... [Pg.61]

No aldehyde or ketone has been obtained from it by oxidation. Its constitution is probably allied to those of citronellol and rhodinol, but, since it contains an asymmetric carbon atom, as shown by its optical activity, the three formulae given under bupleurol obviously cannot represent androl. [Pg.123]

All these specimens may be mixtures of the two optically active varieties of the aldehyde. [Pg.210]

From intermediate 28, the construction of aldehyde 8 only requires a few straightforward steps. Thus, alkylation of the newly introduced C-3 secondary hydroxyl with methyl iodide, followed by hydrogenolysis of the C-5 benzyl ether, furnishes primary alcohol ( )-29. With a free primary hydroxyl group, compound ( )-29 provides a convenient opportunity for optical resolution at this stage. Indeed, separation of the equimolar mixture of diastereo-meric urethanes (carbamates) resulting from the action of (S)-(-)-a-methylbenzylisocyanate on ( )-29, followed by lithium aluminum hydride reduction of the separated urethanes, provides both enantiomers of 29 in optically active form. Oxidation of the levorotatory alcohol (-)-29 with PCC furnishes enantiomerically pure aldehyde 8 (88 % yield). [Pg.196]

The adjacent iodine and lactone groupings in 16 constitute the structural prerequisite, or retron, for the iodolactonization transform.15 It was anticipated that the action of iodine on unsaturated carboxylic acid 17 would induce iodolactonization16 to give iodo-lactone 16. The cis C20-C21 double bond in 17 provides a convenient opportunity for molecular simplification. In the synthetic direction, a Wittig reaction17 between the nonstabilized phosphorous ylide derived from 19 and aldehyde 18 could result in the formation of cis alkene 17. Enantiomerically pure (/ )-citronellic acid (20) and (+)-/ -hydroxyisobutyric acid (11) are readily available sources of chirality that could be converted in a straightforward manner into optically active building blocks 18 and 19, respectively. [Pg.235]

Following this procedure, optically active sapphyrin 58 can be obtained using the enantio-merically pure aldehyde (1./ )-(+ )-nopinone.19... [Pg.705]

A bacterial isolate APN has been shown to convert a-aminopropionitril enantioselectively to L-alanine (94% yield, 75% e e). However, the major disadvantage of this approach, is the low stability of most aminonitriles in water (for example a-aminophenylacetonitrile in water of pH 7, degrades completely within 48 hours). The aminonitriles are always in equilibrium with the aldehyde or ketone and ammonia/HCN. Polymerisation of hydrogen cyanide gives an equilibrium shift resulting in the loss of the aminonitrile. Therefore, a low yield in amino adds is to be expected, which makes this method less attractive for the industrial synthesis of optically active amino adds. [Pg.280]

Since the addition of dialkylzinc reagents to aldehydes can be performed enantioselectively in the presence of a chiral amino alcohol catalyst, such as (-)-(1S,2/ )-Ar,A -dibutylnorephedrine (see Section 1.3.1.7.1.), this reaction is suitable for the kinetic resolution of racemic aldehydes127 and/or the enantioselective synthesis of optically active alcohols with two stereogenic centers starting from racemic aldehydes128 129. Thus, addition of diethylzinc to racemic 2-phenylpropanal in the presence of (-)-(lS,2/ )-Ar,W-dibutylnorephedrine gave a 75 25 mixture of the diastereomeric alcohols syn-4 and anti-4 with 65% ee and 93% ee, respectively, and 60% total yield. In the case of the syn-diastereomer, the (2.S, 3S)-enantiomer predominated, whereas with the twtf-diastereomer, the (2f ,3S)-enantiomer was formed preferentially. [Pg.23]

The cyanohydrin-forming addition of cyanide or cyanide equivalents (e.g.. cyanotrimethylsilane) to optically active a-amino aldehydes occurs diastereoselectively. [Pg.94]

Optically active alkynyl alcohols can, however, be conveniently prepared by the addition of dialkylzinc reagents of alkynyl aldehydes catalyzed by the chiral ligand (S)-l-methyl-a,a-diphenyl-2-pyrrolidine methanol33-34. [Pg.182]

The addition reaction requires the presence of 4 equivalents of HMPA, thus partial racemization of optically active aldehydes under these basic conditions is anticipated. Unfortunately, the addition of magnesium bromide, zinc chloride or cadmium iodide reverses the regioselectivity11 ... [Pg.245]

The cyclohexyloxy(dimethyl)silyl unit in 8 serves as a hydroxy surrogate and is converted into an alcohol via the Tamao oxidation after the allylboration reaction. The allylsilane products of asymmetric allylboration reactions of the dimethylphenylsilyl reagent 7 are readily converted into optically active 2-butene-l, 4-diols via epoxidation with dimethyl dioxirane followed by acid-catalyzed Peterson elimination of the intermediate epoxysilane. Although several chiral (Z)-y-alkoxyallylboron reagents were described in Section 1.3.3.3.3.1.4., relatively few applications in double asymmetric reactions with chiral aldehydes have been reported. One notable example involves the matched double asymmetric reaction of the diisopinocampheyl [(Z)-methoxy-2-propenyl]boron reagent with a chiral x/ -dialkoxyaldehyde87. [Pg.307]

Chiral, nonracemic allylboron reagents 1-7 with stereocenters at Cl of the allyl or 2-butenyl unit have been described. Although these optically active a-substituted allylboron reagents are generally less convenient to synthesize than those with conventional auxiliaries (Section 1.3.3.3.3.1.4.), this disadvantage is compensated for by the fact that their reactions with aldehydes often occur with almost 100% asymmetric induction. Thus, the enantiomeric purity as well as the ease of preparation of these chiral a-substituted allylboron reagents are important variables that determine their utility in enantioselective allylboration reactions with achiral aldehydes, and in double asymmetric reactions with chiral aldehydes (Section 1.3.3.3.3.2.4.). [Pg.326]

Optically active (Z)-l-substituted-2-alkenylsilanes are also available by asymmetric cross coupling, and similarly react with aldehydes in the presence of titanium(IV) chloride by an SE process in which the electrophile attacks the allylsilane double bond unit with respect to the leaving silyl group to form ( )-s)vr-products. However the enantiomeric excesses of these (Z)-allylsilanes tend to be lower than those of their ( )-isomers, and their reactions with aldehydes tend to be less stereoselective with more of the (E)-anti products being obtained74. [Pg.353]

Trimethyl(l-phenyl-2-propenyl)silane of high enantiomeric excess has also been prepared by asymmetric cross coupling, and reacts with aldehydes to give optically active products in the presence of titanium(IV) chloride. The stereoselectivity of these reactions is consistent with the antiperiplanar process previously outlined75. [Pg.353]

Optically active 3-(trimethylsilyl)cyclopentene of moderate enantiomeric excess is available by asymmetric hydrosilation (see Section 1.3.3.3.5.1.5.) and reacts with aldehydes with reasonable stereoselectivity in the presence of titanium(IV) chloride36. [Pg.354]

Chiral amides of 2-(tributylstannylmethyl)-2-propenoic acid show useful stereoselectivity in their Lewis acid induced reactions with aldehydes, and the products have been converted into optically active a-methylenelactones95. [Pg.379]

The stereoselectivity of reactions between optically active a-methyl-y-alkoxyallylstannancs and a-alkoxyaldehydes has been investigated with matched or mismatched pairings depending on whether addition to a chelated or nonchelated aldehyde is involved 121. [Pg.388]


See other pages where Aldehydes optically active is mentioned: [Pg.113]    [Pg.532]    [Pg.57]    [Pg.58]    [Pg.200]    [Pg.113]    [Pg.532]    [Pg.57]    [Pg.58]    [Pg.200]    [Pg.287]    [Pg.402]    [Pg.324]    [Pg.103]    [Pg.439]    [Pg.31]    [Pg.279]    [Pg.81]    [Pg.616]    [Pg.68]    [Pg.182]    [Pg.315]    [Pg.352]    [Pg.384]   
See also in sourсe #XX -- [ Pg.163 ]

See also in sourсe #XX -- [ Pg.163 ]




SEARCH



Aldehydes optically active, synthesis

Optical activity, aldehydes—mechanistic

Optically active N-protected a-amino aldehydes

Pyridine, dihydroanalysis of aldehydes optically active

© 2024 chempedia.info