Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Nylon blends, dyeing

Cellulose triesters, moisture properties of selected, 5 416t Cellulose trinitrate, 5 396 Cellulose valerate(s), 5 419 moisture properties, 5 416t Cellulose x, 5 373, 378-379 8 21 Cellulose xanthate, 4 716 5 383 20 559 Cellulosic-acrylic fibers, dyeing, 9 201-202 Cellulosic fiber blends, dyeing, 9 199-202 Cellulosic fiber—nylon blends, dyeing, 9 202 Cellulosic fibers, 18 96... [Pg.157]

Nylon blends, dyeing, 9 204 Nylon block copolymer, 19 762 Nylon carpet fibers, stain-resistant, 19 764 Nylon-clay nanocomposites, 11 313-314 Nylon extrusion, temperatures for, 19 789t Nylon feed yarns, spin-oriented, 19 752 Nylon fiber(s), 24 61 production of, 19 740 world production of, 19 7654 Nylon fiber surfaces, grafting of polymers on, 19 763-764... [Pg.640]

The most popular coloration method is to apply the dyes continuously, usually by padding, but printing, spray jet, and droplet appHcations are used. In order to obtain patterned effects, chemical or physical resisting agents can be appHed first, and deep and normal dyeing nylon and basic dyeable nylon blends can be used. In the latter case the basic dyeable nylon is dyed with cationic dyes. Carpets can be printed in an analogous method to other textiles and this process is more popular in Europe than the continuous appHcation techniques used in the United States. [Pg.362]

Polyester Fiber—Nylon Blends. This fiber blead is used ia apparel fabrics as weU as ia carpets. Disperse dyes dye both fibers, however they... [Pg.366]

Nylon Blends. Differential dyeiag nylon types and cationic dyeable nylon blends are used primarily ia the carpet iadustry. The selection of cationic dyes for nylon is rather limited most products have very poor fastness to light. These blends are dyed ia a one-bath procedure at 95—100°C. Selected acid dyes are used for differential dyeiag. Disperse dyes will dye all different types ia the same depth. [Pg.367]

Polyester Fiber-Nylon Blends. This fiber blend is used in apparel fabrics as well as in earpels. Disperse dyes dye both fibers, however they possess only marginal fastness properties on nylon. Therefore it is important to select those disperse dyes that dye nylon least under the given circumstances. The nylon is dyed with acid dyes, selected according to the fastness requirements. [Pg.525]

Insect resist finishes are most commonly applied during dyeing. The best light fastness and wet fasmess properties are obtained when the finish is able to fully penetrate the fibres. When applying insect resist finishes to wool/nylon blends, care must be taken in the choice of the particular finish used. Chlorphenylid derivatives exhaust preferentially to nylon, leaving the wool fibres unprotected, whereas permethrin-based products distribute themselves more uniformly between the two fibre types. [Pg.178]

Very effective retarding/migration aid for dyeing acrylic fibres with basic dyes, particularly recommended for use with K2.5 to K5.0 colours. Low blocking action ensures good exhaustion and the ability to overdye. No effect on softeners applied from dyebath. Acts as an antiprecipitant when dyeing acrylic/ nylon blends. [Pg.34]

Levelling agent and antiprecipitant for dyeing wool and nylon. Used when it is undesirable to have cationic levellers present or if carry over of traces of cations into subsequent treatments would be undesirable. It functions as an anti precipitant to enable acrylic/wool and acrylic/nylon blends to be dyed in a single bath. [Pg.36]

Blocking agent used to produce solid shades when dyeing wool/nylon blends. Also used in wool/viscous dyeing. [Pg.36]

Acid-dye leveling agent. Promotes on-tone buildup, controls barre, and migrates dye for best levelness in rapid dye cycles. Also compatibilizes acid and cationic dyes when cross-dyeing nylon blends. Recommended for all difficult nylon applications, especially automotive and carpet dyeing. [Pg.398]

Chemlube. [demonic Industries] Eth-oxylated sulfated blends dye assistant, wetting/nonrewetting agent, and detergent for use on polyester, cotton, nylon or blends. [Pg.73]

Uses Leveling agenL dIspersanL and compatibilizing agent for dyeing actylic/wool and actylic/nylon blends by the single bath method and for basic dyeable polyester... [Pg.1553]

Sulfur dyes are used mainly for dyeing textile ceUulosic materials or blends of ceUulosic fibers (qv) with synthetic fibers such as acryUc fibers, polyamides (nylons), and polyesters. They are also used for sHk (qv) and paper (qv) in limited quantities for specific appHcations. Solubilized sulfur dyes are used on certain types of leathers (qv). [Pg.162]

Catalytic fading of certain mixtures of acid dyes on nylon, wool and their blends is a particularly significant problem of dye selection for carpets [165]. Xenotest ratings as low as 3-4 (much bluer) were found for green shades on nylon containing an azopyrazolone component such as Cl Acid Yellow 19 (3.150), which fades much more rapidly in the presence... [Pg.160]

The versatility of this system is reflected in its suitability for blends of wool with other fibres [89]. The ideal conditions for the dyeing of wool/acrylic blends are at pH 4-5 and Albegal SET inhibits the risk of co-precipitation between Lanaset anionic dyes and basic dyes. Lanaset dyes are quite stable when dyeing polyester/wool at pH 4-5 and 115-120°C using Irgasol HTW (Ciba) as wool protectant. These dyes are also suitable for dyeing wool in its blends with silk, nylon or cellulosic fibres. [Pg.275]

Wool-Nylon. Nylon has been blended with wool in order to give additional strength to the yarn or fabric, it is used mainly in tbe woollen industry for coats and jackets and, to a lesser extent, for socks and carpet yams. Both fibers are dyed with the same products, however the fibers have different affinity to them. Generally level dyeing acid dyes are applied. [Pg.525]

Classification by usage or application is the principal system adopted by the Colour Index [5], Because the most important textile fibers are cotton and polyester, the most important dye types are those used for dyeing these two fibers, including polyester-cotton blends (see Chapter 4). Other textile fibers include nylon, polyacrylonitrile, and cellulose acetate. [Pg.2]

Reserving agent for the dyeing of nylon in blends with wool or cotton. Effective on all acid dyes including milling and premetallised. [Pg.35]

REMOL GES Liquid is an efficient leveling agent to be used in dyeing of nylon fibers and wool as well as their blends. [Pg.62]

BORCODYE D-6-LF is a new leveling agent for disperse and acid dyes on acetate and nylon and on blends with natural fibers. It offers outstanding emulsification and dispersion properties and also acts as an anti-precipitant. [Pg.110]


See other pages where Nylon blends, dyeing is mentioned: [Pg.640]    [Pg.640]    [Pg.365]    [Pg.366]    [Pg.367]    [Pg.275]    [Pg.524]    [Pg.509]    [Pg.112]    [Pg.278]    [Pg.1349]    [Pg.283]    [Pg.286]    [Pg.257]    [Pg.447]    [Pg.366]    [Pg.228]    [Pg.41]    [Pg.127]    [Pg.425]    [Pg.15]    [Pg.257]    [Pg.477]    [Pg.37]   
See also in sourсe #XX -- [ Pg.525 ]




SEARCH



Blends, dye

Cellulosic-nylon fiber blends, dyeing

Dyeing Blends

Nylon dyeing

Nylons blends

Wool-nylon fiber blends, dyeing

© 2024 chempedia.info