Nylon block copolymer

Copolymers. There are two forms of copolymers, block and random. A nylon block copolymer can be made by combining two or more homopolymers in the melt, by reaction of a preformed polymer with diacid or diamine monomer by reaction of a complex molecule, eg, a bisoxazolone, with a diamine to produce a wide range of multiple amide sequences along the chain and by reaction of a diisocyanate and a dicarboxybc acid (193). In all routes, the composition of the melt is a function of temperature and more so of time. Two homopolyamides in a moisture-equiUbrated molten state undergo amide interchange where amine ends react with the amide groups. 

Reaction Injection Molding. RIM uses the anionic polymeri2ation of nylon-6 to carry out polymeri2ation in the mold. A commercial process involves the production of block copolymers of nylon-6 and a polyether by mixing molten caprolactam, catalyst, and polyether prepolymer, and reacting in a mold (27,28). 

Nyrim Nylon Block Copolymers, NY-01-01, Monsanto Co., St. Louis, Mo. 

As more complex multicomponent blends are being developed for commercial appHcations, new approaches are needed for morphology characterization. Often, the use of RuO staining is effective, as it is sensitive to small variations in the chemical composition of the component polymers. For instance PS, PC, and styrene—ethylene/butylene—styrene block copolymers (SEES) are readily stained, SAN is stained to a lesser degree, and PET and nylons are not stained (158,225—228). 

Blends based on polyolefins have been compatibilized by reactive extrusion where functionalized polyolefins are used to form copolymers that bridge the phases. Maleic anhydride modified polyolefins and acrylic acid modified polyolefins are the commonly used modified polymers used as the compatibilizer in polyolefin-polyamide systems. The chemical reaction involved in the formation of block copolymers by the reaction of the amine end group on nylon and anhydride groups or carboxylic groups on modified polyolefins is shown in Scheme 1. 

To date, the melt state linear dynamic oscillatory shear properties of various kinds of nanocomposites have been examined for a wide range of polymer matrices including Nylon 6 with various matrix molecular weights [34], polystyrene (PS) [35], PS-polyisoprene (PI) block copolymers [36,37], poly(e-caprolactone) (PCL) [38], PLA [39,40], PBS [30,41], and so on [42],... 

Nylon blends, dyeing, 9 204 Nylon block copolymer, 19 762 Nylon carpet fibers, stain-resistant, 19 764 Nylon-clay nanocomposites, 11 313-314 Nylon extrusion, temperatures for, 19 789t Nylon feed yarns, spin-oriented, 19 752 Nylon fiber(s), 24 61 production of, 19 740 world production of, 19 7654 Nylon fiber surfaces, grafting of polymers on, 19 763-764... 

Liquid PA or cast nylon is a block copolymer of caprolactam and a prepolymer that can be processed in the liquid state, which simplifies tooling and processing machines. 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

Copolymers. Copolymers from mixtures of different bisphenols or from mixtures of dichlorosulfone and dichlorobenzophenone have been reported in the patent literature. Bifunctional hydroxyl-terminated polyethersulfone oligomers are prepared readily by the polyetherification reaction simply by providing a suitable excess of the bisphenol. Block copolymers are obtained by reaction of the oligomers with other polymers having end groups capable of reacting with the phenol. Multiblock copolymers of BPA-polysulfone with polysiloxane have been made in this way by reaction with dimethyl amino-terminated polydimethylsiloxane the products are effective impact modifiers for the polyethersulfone (79). Block copolymers with nylon-6 are obtained when chlorine-terminated oligomers, which are prepared by polyetherification with excess dihalosulfone, are used as initiators for polymerization of caprolactam (80). 

Polyetheramide. These thermoplastic elastomers are typically block copolymers of polyether rubber with nylon crystalline domains. 

The following TPs are the main thermoforming materials processed high-impact and high-heat PS, HDPE, PP, PVC, ABS, CPET, PET, and PMMA. Other plastics of lesser usage are transparent styrene-butadiene block copolymers, acrylics, polycarbonates, cellulosics, thermoplastic elastomers (TPE), and ethylene-propylene thermoplastic vulcanizates. Coextruded structures of up to seven layers include barriers of EVAL, Saran, or nylon, with polyolefins, and/or styreneics for functional properties and decorative aesthetics at reasonable costs.239-241... 

Nylon Block Copolymers as Matrix Resin. Monsanto and DSM (Dutch State Mines) have been investigating caj olactam RIM with and without glass reinforcement (31). 

The product of the anionic polymerization of caprolactam is nylon 6, a crystalline polymer with excellent mechanical properties, melting at 215°C. The development of nylon block copolymers has permitted the range of properties to be extended from nylon 6 on one extreme through tough engineering-type products to soft elastomeric products on the other extreme. In addition to improved properties for RIM products, these block copolymers offer some process... 

The production of cast mineral-reinforced nylon 6 products was terminated in 1971. Research was then directed at expanding the range of properties obtainable from the anionic polymerization of caprolactam through nylon block copolymers and their fabrication by reaction injection molding. 

---