Anionic dyes

Substances other than enzymes can be immobilized. Examples include the fixing of heparin on polytetrafluoroethylene with the aid of PEI (424), the controUed release of pesticides which are bound to PEI (425), and the inhibition of herbicide suspensions by addition of PEI (426). The uptake of anionic dyes by fabric or paper is improved if the paper is first catonized with PEI (427). In addition, PEI is able to absorb odorizing substances such as fatty acids and aldehydes. Because of its high molecular weight, PEI can be used in cosmetics and body care products, as weU as in industrial elimination of odors, such as the improvement of ambient air quaHty in sewage treatment plants (428). 

The side groups of the amino acids vary markedly in size and chemical nature and play an important role in the chemical reactions of the fiber. For example, the basic groups (hisidine, arginine, and lysine) can attract acid (anionic) dyes, and in addition the side chains of lysine and hisidine are important sites for the attachment of reactive dyes. The sulfur-containing amino acid cysteine plays a very important role, because almost all of the cysteine residues in the fiber are linked in pairs to form cystine residues, which provide a disulfide bridge —S—S— between different polypeptide molecules or between segments of the same molecules as shown ... 

ACID DYES Commercial acid dyes contain one or more sulfonate groups, thereby providing solubility in aqueous media. These dyes are apphed in the presence of organic or mineral acids (pH 2—6). Such acids protonate any available cationic sites on the fiber, thereby making possible bonding between the fiber and the anionic dye molecule. Wool, an animal fiber, is an amphoteric coUoid, possessing both basic and acidic properties because of the amino and carboxylic groups of the protein stmcture. In order to dye such a system, coulombic interactions between the dye molecule and the fiber must take place ie, H2N" -wool-COO + H2N" -wool-COOH. The term acid dye is appHed to those that are capable of such interactions. Acid dyes... 

Direct dyes are defined as anionic dyes substantive to ceUulosic fibers (cotton, viscose, etc), when applied from an aqueous bath containing an electrolyte. Before the discovery of Congo Red in 1884, only mordanted cotton could be dyed. Congo Red [573-58-0] (62) (Cl Direct Red 28 Cl 22120) a primary symmetrical disazo dye, which is made readily from bisdiazotized benzidine and naphthionic acid [84-86-6] (4-arnino-l-naphthalenesulfonic acid), was the precursor of a most important line of dyes, including all shades, derived from benzidine and its homologues. Today, no benzidine dye is produced because benzidine is carcinogenic. 

Different polyamide fibers with varying affinities for anionic dyes are pretreated with aqueous acidic solution containing sulfated castor od to give uniform shade levels. Sulfated castor od is also used in compositions for treatment of fabrics, skins, and furs to clean and revive colors (115). 

Fig. 8. Sensitizing dyes of the cyanine class. K. = N — alkyl or chalcogens (O, S, Se, Te) R = chloro, phenyl, or additional benzene ring R = methyl, ethyl, or hydrogen n = 0, 1, 2 and RPRIME, R " = alkyl or sulfoalkyl. Solubihty in methanol for a carbocyanine dye n = 1 X = S R = Cl R = ethyl. Cationic dye (R" = R " = ethyl anion = bromide) 9.5 mmol/T. neutral dye (R" = ethyl R " = sulfopropyl) 3.6 mmol/L anionic dye (R" = R = sulfopropyl ...

Acid Dyes. These water-soluble anionic dyes ate appHed to nylon, wool, sUk, and modified acryHcs. They ate also used to some extent for paper, leather, food, and cosmetics. The original members of this class aU had one or mote sulfonic or catboxyHc acid groups in thein molecules. This characteristic probably gave the class its name. Chemically, the acid dyes consist of azo (including preformed metal complexes), anthraquiaone, and ttiaryHnethane compounds with a few azHie, xanthene, ketone imine, nitro, nitroso, and quHiophthalone compounds. 

Acid Dyes. These are anionic dyes, usually containing sulfonic acid groups, that are substantive to wool, other protein fibers, and polyamides when dyed from an acidic dyebath. The lower the pH the more rapid the dyeing, and exhaustion efficiency is enhanced by increased acidity. 

Direct Dyes. These are defined as anionic dyes, again containing sulfonic acid groups, with substantivity for ceUulosic fibers. They are usually a2o dyes (qv) and can be mono-, dis-, or polya2o, and are ia general planar stmctures. They are appHed to ceUulosic fibers from neutral dyebaths, ie, they have direct substantivity without the need of other agents. Salt is used to enhance dyebath exhaustion. Some direct dyes can be appHed to wool and polyamides under acidic conditions, but these are the exception. 

The worked out soi ption-photometric method of NIS determination calls preliminary sorption concentration of NIS microamounts from aqueous solutions on silica L5/40. The concentrate obtained is put in a solution with precise concentration of bromthymol-blue (BTB) anionic dye and BaCl, excess. As a result the ionic associate 1 1 is formed and is kept comparatively strongly on a surface. The BTB excess remains in an aqueous phase and it is easy to determinate it photometrically. The linear dependence of optical density of BTB solutions after soi ption on NIS concentration in an interval ITO - 2,5T0 M is observed. The indirect way of the given method is caused by the fact the calibration plot does not come from a zero point of coordinates, and NIS zero concentration corresponds to initial BTB concentration in a solution. 

In the present work the acid-base surface properties of three Al O samples for a chromatography are investigated acidic (I), basic (II) and neutral (III) ones with the using of heterogeneous titration of their suspensions by HCl and NaOH solutions. To establish the correlations between the acid-base and adsoi ption properties studied Al O the representatives of cationic dyes -diamond green (DG), fuchsine (F) and anionic dyes - eriochrom black T and chromic dark blue have been used. 

The (I)-(III)-samples sorption ability investigation for cationic dyes microamounts has shown that for DG the maximum rate of extraction is within 70-90 % at pH 3. The isotherm of S-type proves the physical character of solution process and a seeming ionic exchange. Maximal rate of F extraction for all samples was 40-60 % at pH 8 due to electrostatic forces. The anionic dyes have more significant affinity to surface researching Al Oj-samples comparatively with cationic. The forms of obtained soi ption isotherms atpH have mixed character of H,F-type chemosorption mechanism of fonuation of a primary monolayer with the further bilayers formation due to H-bonds and hydrophobic interactions. The different values of pH p for sorbents and dyes confirm their multifunctional character and distinctions in the acid-base properties of adsoi ption centers. 

It was shown that Zn + adsorbed onto SG-PVSA composite film as Zn(Phen) complex. It can be detected spectrophotometrically after treatment with anionic dye Bengal Rose (BR). Ternary complex Zn + - Phen-BR formed on the surface under optimal conditions. SG-PVSA film was used for determination of Zn + by spectrophotometric method. The calibration graph was linear in the concentration range 2,5T0 - STO mol/l. 

The two-phase titration is based on the reaction of anionic surfactants with cations—normally large cationic surfactants—to form an ion pair. The preferred cationic is benzethonium chloride (Hyamine 1622, 1) because of the purity of the commercially available product. On neutralization of the ionic charges, the ion pair has nonpolar character and can be extracted continuously into the organic phase, e.g., chloroform, as it is formed. The reaction is monitored by addition of a water-soluble cationic dye, dimidium bromide (2), and a water-soluble anionic dye, disulfine blue (3). The cationic dye forms an extractable... 

This separation technique produces very good results for acidic or anionic dye molecules containing carboxylic, sulfonic, and hydroxy groups that can be separated within short run times in an aLkaline medium in a single analysis step. - Natural colorants usually do not contain these functional groups they are usually more voluminous and strongly hydrophobic, properties that complicate their determination by CE. The sample pretreatment is more difQcult when CE (compared to HPLC) is used. 

Electrolytes are used to promote the exhaustion of direct or reactive dyes on cellulosic fibres they may also be similarly used with vat or sulphur dyes in their leuco forms. In the case of anionic dyes on wool or nylon, however, their role is different as they are used to facilitate levelling rather than exhaustion. In these cases, addition of electrolyte decreases dye uptake due to the competitive absorption of inorganic anions by the fibre and a decrease in ionic attraction between dye and fibre. In most discussions of the effect of electrolyte on dye sorption, attention is given only to the ionic aspects of interaction. In most cases, this does not create a problem and so most adsorption isotherms of water-soluble dyes are interpreted on the basis of Langmuir or Donnan ionic interactions only. There are, however, some observed cases of apparently anomalous behaviour of dyes with respect to electrolytes that cannot be explained by ionic interactions alone. 

It is not surprising, therefore, that chitosan and its basic derivatives will complex with anionic dyes. Giles et al. [68,69] researched the use of chitosan for the removal of dyes from effluent as long ago as 1958. The binding capacity of chitosan for anionic dyes is pH-dependent, but it has been reported [65] that in effluent treatment as much as 10 g dye per kg chitosan can be complexed at pH values above about 6.5. Similarly, chitosan has been used for the aftertreatment of direct dyeings on cotton to improve their fastness. 

Traditional syntan treatments are rather ineffective for improving the wet fastness of anionic dyes on wool, mainly because of weakness of the interaction between syntan and fibre. It is therefore not surprising that covalent reactive systems have been explored to find more effective aftertreatments and dye-resist treatments for this fibre. In an initial study... 

The washing-off of prints is best carried out with anionic polycondensation products of arylsulphonic acids [29] since these can improve the wet fastness of anionic dyes. 

---