Nonroutine tasks

Subcontractor may perform limited site work (e.g., nonroutine tasks such as surveying, etc.) but may not work in exchision/contamination reduction zones if he meets the following requirements ... 

Number of nonroutine tasks that required a on-the-spot Job safety analysis because there was no preexisting safe work procedure X ... 

HazCom area managers ensure that a list of the hazardous chemicals (using identities referenced on the appropriate MSDSs) known to be present in the woik area is accessible to SNL personnel and that SNL personnel are informed of the hazards associated with nonroutine tasks and with chemicals contained in unlabeled pipes. (This may be accomplished through site-specific training, health and safety meetings, and technical woik documents.)... 

An explanation of how workers will be informed about the hazards of nonroutine tasks (such as cleaning reactors) and the hazards of chemicals... 

Provides prejob safety instructions for irregular or nonroutine tasks... 

The OSHA HCS (29 CFR 1910.1200) requires employers to provide employees information and training on hazardous chemicals used in their work areas. Employers must conduct training at the time of their initial assignment and upon the introduction of a new hazardous substance. Training must address the methods and observations used to detect the presence or release of the chemical. It must also address physical and health hazards, protective measures, labeling, and an explanation of the SDS. Employers must inform employees of the hazards of nonroutine tasks and the hazards associated with chemicals in unlabeled pipes (Table 7.11). 

Occasionally, employees may be required to perform nonroutine tasks. Prior to starting work, each employee will be given information about the hazards of the area or procedure. This information will include (1) specific chemical hazards, (2) protection/safety measures the employee can take to lessen risks of performing the task, and (3) measures the company has taken to eliminate or control the hazard. It is the policy of this worksite that no employee will begin performance of a nonroutine task without first receiving appropriate safety and health training. Hazardous nonroutine tasks we have at our facility include the following (list hazardous nonroutine tasks)... 

The methods the employer will use to inform employees of the hazards involved in nonroutine tasks and the hazards associated with chemicals contained in unlabeled pipes in their workplace areas... 

B2. When implementing/introducing nonroutine tasks, materials or equipment, or modifying processes, what types of analyses are performed to determine their impact on safety and health Is it adequate ... 

Another benefit of developing a JHA is that it provides a consistent message to each new employee on a specific task or for seasoned employees who need safety awareness training or review of their specific or nonroutine task [5]. 

When you have completed your training, each employee should sign an acknowledgement stating that they understand the identified hazards. This form should be signed before the employee performs any nonroutine task or any new task. Figure 15-5 shows a sample sign-off form that can be used to document this review. 

Hazard Analysis of Significant Changes Hazard analysis of significant changes, including but not limited to nonroutine tasks (such as those performed less than once a year), new processes, materials, equipment and facilities must be conducted to identify uncontrolled hazards prior to the activity or use and must lead to hazard elimination or control. If a nonroutine or new task is eventually... 

Describe the methods you will use to inform employees of the hazards of nonroutine tasks (for example, the cleaning of reactor vessels). What procedures do you have to ensure that those jobs that are not part of the weekly or monthly functioning of your facility fall under your employee training system ... 

Nonroutine tasks involving high hazards and associated risk. 

Under this program, the contents of the Hazard Communication Standard will be provided, the hazardous properties of chemicals that are used, safe handling procedures, and measures to take to protect employees from these chemicals. Information will also be provided on the hazards associated with nonroutine tasks, such as the cleaning of reactor vessels and the hazards associated with chemicals in unlabeled pipes. 

When hazardous nonroutine tasks (e.g., cleaning tanks, entering confined spaces, etc.) are performed, a special training session will be conducted to inform the employees regarding the hazardous chemicals to which they might be exposed and the proper precautions to take to reduce or avoid exposure. 

---