Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Noise regulations

In recent years, many closed buildings have again been built in order to meet new noise regulations. The buildings are usually provided with forced ventilation, but this is much less effective than natural ventilation and is usually designed for the comfort of the operators rather than the dispersion of leaks. [Pg.69]

The aim of the Noise Regulations is to ensure that workers hearing is protected from excessive noise at their workplace, which could cause them to lose their hearing and/or to suffer from tinnitus (permanent ringing in the ears). [Pg.15]

The main purpose of the Noise Regulations is to control noise levels rather than measure them. This involves the better design of machines, equipment and work processes, ensuring that personal protective equipment... [Pg.314]

The HSE Guidance on the Noise Regulations, L108, offers some very useful advice on the implementation of the Regulations and should be read by anyone who suspects that they have a noise problem at work. The guidance covers equipment and procedures for noise surveys and contains a noise exposure ready-reckoner which can be used to evaluate /-EP,d when the noise occurs during several short intervals and/or at several different levels during the 8-hour period. [Pg.317]

Making the workplace safe should be the first consideration but if it is not possible to reduce risks sufficiently by the methods outlined above the worker may need to be protected from the environment by the use of personal protective equipment. Where appropriate, the PPE Regulations require the provision of suitable PPE except where other regulations require the provision of specific protective equipment, such as the asbestos, lead and noise regulations. The PPE Regulations are supported by practical guidance on their implementation. [Pg.516]

Notification of New Substances Regulations 1993 822,869 Offices, Shops and Railway Premises Act 1963 37 Offshore (Electricity and Noise) Regulations 1997 746 Offshore Safety Act 1992 56... [Pg.991]

Only trained and experienced operatives who are physically fit should be selected and appointed to operate woodworking machines. Training of operatives should include information from COSHH and noise assessments, training on safe use and the precautions to be followed on each type of machine. Machine training should include demonstration and work under supervision. Management will also be trained in these aspects, plus safety management in joinery workshops and the requirements of the COSHH and Noise Regulations. [Pg.206]

The linear power supply finds a very strong niehe within applieations where its ineffieieney is not important. These inelude wall-powered, ground-base equipment where foreed air eooling is not a problem and also those applieations in whieh the instrument is so sensitive to eleetrieal noise that it requires an eleetrieally quiet power supply—these produets might inelude audio and video amplifiers, RF reeeivers, and so forth. Linear regulators are also popular as loeal, board-level regulators. Here only a few watts are needed by the board, so the few watts of loss ean be aeeommodated by a simple heatsink. If dielee-trie isolation is desired from an ae input power souree it is provided by an ae transformer or bulk power supply. [Pg.11]

Ventilation noise and the annoyance effects which may result have been a recurring question in recent years for researchers, occupational health services, and various aurhorities. In spite of this, there are still major shortcomings in our knowledge about the links between human effects and exposure to ventilation noise. Current regulations and recommendations are thus based on uncertain principles in certain respects. [Pg.346]

The acceptability of a noise is fixed from the designer on the basis of specific data for the area depending on state and country laws. In some countries there are regulations requiring that the workers cannot be exposed to a noise exceeding set limits. [Pg.800]

Provides scientific and technical support for the Federal Environment Ministry, especially with the preparation of legal and administrative regulations in the fields of air quality control, noise abatement, waste management, water resources management, soil conservation, environmental chemicals, and health-related environmental issues. [Pg.282]

Occupational Safety and Health Administration regulations as they relate to (a) safety of design related to injury to personnel (includes such matters as latest vessel design [53], noise level from operating equipment, etc., [20, 21, 22, 23, 24, 25, 26, 27, 28]. (b) safety of the plant layout emdronment which might influence the safety of the plant facilities. [Pg.33]

Noise from a compressor plant arises at different sources, and each source has its own pattern of sound pressure levels. Noise levels can be divided into two groups, the low-frequency pulsating air intake sound and the higher-frequency machine noise from compressor, prime mover and fans. Local statutory regulations on noise levels should be determined, and action taken by the supplier to ensure that the noise levels do not exceed those stipulated. [Pg.547]

That the authorities have refused unreasonably to accept compliance with alternative requirements or that the requirements of the notice are otherwise unreasonable in character or extent, or are unnecessary. This defense is self-explanatory. The local authorities are only permitted to ask for works that will abate the noise nuisance. Other works (perhaps to comply with legislation) should not be specified in the notice. They may, however, be contained in a letter separate from the notice. An example of this would be where the fitting of acoustic enclosures to food-manufacturing machines breached food hygiene requirements. Readily cleanable enclosures may be a requirement of the Food Hygiene Regulations, but it should not be contained in a Section 58 Control of Pollution Act notice. [Pg.655]

Federal, state, and local regulations require serious attention be paid to noise levels within the plant. Vibration analysis can be used to isolate the source of noise generated by plant equipment as well as background noises such as those generated by fluorescent lights and other less obvious sources. The ability to isolate the source of abnormal noises permits cost-effective corrective action. [Pg.665]

The Noise at Work Regulations 1989 has set action levels which must be complied with ... [Pg.1062]

Noise must be comply with the Noise at Work Regulations and ear protectors with BS 6344, Industrial hearing protectors. [Pg.1071]

We should stress that the temperature T has nothing to do with the real temperature of either a brain or neural circuit. Its sole purpose is to act as a control parameter regulating the amount of noise in the stochastic system. [Pg.529]


See other pages where Noise regulations is mentioned: [Pg.76]    [Pg.315]    [Pg.1157]    [Pg.1084]    [Pg.746]    [Pg.119]    [Pg.948]    [Pg.272]    [Pg.62]    [Pg.76]    [Pg.315]    [Pg.1157]    [Pg.1084]    [Pg.746]    [Pg.119]    [Pg.948]    [Pg.272]    [Pg.62]    [Pg.2832]    [Pg.90]    [Pg.111]    [Pg.268]    [Pg.169]    [Pg.338]    [Pg.89]    [Pg.93]    [Pg.539]    [Pg.177]    [Pg.473]    [Pg.474]    [Pg.203]    [Pg.327]    [Pg.1144]    [Pg.408]    [Pg.1057]    [Pg.1062]   
See also in sourсe #XX -- [ Pg.92 ]

See also in sourсe #XX -- [ Pg.92 ]

See also in sourсe #XX -- [ Pg.5 , Pg.153 , Pg.552 , Pg.554 ]

See also in sourсe #XX -- [ Pg.62 , Pg.63 ]




SEARCH



Control of Noise at Work Regulations

Noise at Work Regulations

© 2024 chempedia.info