Nitrous oxide, as oxidant

Table 16.9 Oxidative coupling of methane on WC with nitrous oxide as oxidant...

With worldwide phenol consumption exceeding 5 million tons in 1995, optimizing production routes of this essential chemical becomes very important. As an alternative to the traditional cumene process, a one-step-synthesis of phenol from benzene is highly desirable. With a ZSM5 type zeolite in its acid form as catalyst and nitrous oxide as oxidant, benzene may be directly oxidized to phenol [1-4] ... 

Over many years, the simple flame test , whereby atoms of, say, sodium are excited in a flame, giving a characteristic yellow colour, has been developed as a sophisticated and sensitive instrumental technique (flame emission spectrophotometry). Sensitivity depends on dissociation of the injected materials into free atoms in order that the characteristic atomic emissions can be given. This in turn demands high flame temperatures. The combination of acetylene fuel with nitrous oxide as oxidant has proved highly successful for this purpose. What temperature is possible in theory The best mixture would correspond to the equation ... 

A special case is the hydroxylation of benzene with nitrous oxide as oxidant, for which commercialization has been announced [55]. The reaction occurs on Fe-silicalite-1, in the gas phase, at temperatures close to 400 °C, producing molecular nitrogen as by-product. Other zeolites and supported metals and metal oxides are less satisfactory catalysts. Toluene, chlorobenzene, and fluorobenzene are similarly hydroxylated, yielding all three possible isomers. Phenol produces catechol and hydroquinone. 

Flames may use propane, acetylene, or hydrogen as combustion gases, with air or nitrous oxide as oxidant. With these mixtures, temperatures of 2000 - 3000 K can be obtained. Temperatures of flames (in kelvin) used in AAS are given below [157] ... 

Woods, M., Mirkelamoglu, B. and Ozkan, U. (2009). Oxygen and nitrous oxide as oxidants Implications for ethane oxidative dehydrogenation over sUica-titania-supported molybdenum, J. Phys. Chem. C, 113, pp. 10112-10119. 

The combustion of acetylene fuel with nitrous oxide as oxidant at 25°C (298 K) is widely performed in flame emission spectrophotometry. Calculate the maximum temperature attained if the best mixture corresponds to the reaction... 

Dinitrogen oxide, nitrous oxide, N2O. Colourless gas, m.p. —9T C, b.p. —88-5°C (heat on NH4NO3). Decomposes to N2 and O2 above SOO C can be detonated. Linear molecule NNO. Used as a mild anaesthetic. 

The main problem in this technique is getting the atoms into the vapour phase, bearing in mind the typically low volatility of many materials to be analysed. The method used is to spray, in a very fine mist, a liquid molecular sample containing the atom concerned into a high-temperature flame. Air mixed with coal gas, propane or acetylene, or nitrous oxide mixed with acetylene, produce flames in the temperature range 2100 K to 3200 K, the higher temperature being necessary for such refractory elements as Al, Si, V, Ti and Be. 

Propellants. The propellant, said to be the heart of an aerosol system, maintains a suitable pressure within the container and expels the product once the valve is opened. Propellants may be either a Hquefied halocarbon, hydrocarbon, or halocarbon—hydrocarbon blend, or a compressed gas such as carbon dioxide (qv), nitrogen (qv), or nitrous oxide. 

Considerable developmental effort is being devoted to aerosol formulations using the compressed gases given in Table 4. These propellants are used in some food and industrial aerosols. Carbon dioxide and nitrous oxide, which tend to be more soluble, are often preferred. When some of the compressed gas dissolves in the product concentrate, there is partial replenishment of the headspace as the gas is expelled. Hence, the greater the gas solubiUty, the more gas is available to maintain the initial conditions. 

The narcotic potency and solubiUty in oHve oil of several metabohcaHy inert gases are Hsted in Table 10. The narcotic potency, ED q, is expressed as the partial pressure of the gas in breathing mixtures requited to produce a certain degree of anesthesia in 50% of the test animals. The solubiUties are expressed as Bunsen coefficients, the volume of atmospheric pressure gas dissolved by an equal volume of Hquid. The Hpid solubiHty of xenon is about the same as that of nitrous oxide, a commonly used light anesthetic, and its narcotic potency is also about the same. As an anesthetic, xenon has the virtues of reasonable potency, nonflammability, chemical inertness, and easy elimination by the body, but its scarcity and great cost preclude its wide use for this purpose (see Anesthetics). 

Other uses of oxyacetylene flames in mill operations are in building up or hardfacing metal, lancing (piercing a hole in a metal mass), and a variety of metal cleaning procedures. A minor but interesting fuel use of acetylene is in flame spectrophotometry where oxygen and nitrous oxide are used as oxidants in procedures for a wide variety of the elements. 

Gate oxide dielectrics are a cmcial element in the down-scaling of n- and -channel metal-oxide semiconductor field-effect transistors (MOSEETs) in CMOS technology. Ultrathin dielectric films are required, and the 12.0-nm thick layers are expected to shrink to 6.0 nm by the year 2000 (2). Gate dielectrics have been made by growing thermal oxides, whereas development has turned to the use of oxide/nitride/oxide (ONO) sandwich stmctures, or to oxynitrides, SiO N. Oxynitrides are formed by growing thermal oxides in the presence of a nitrogen source such as ammonia or nitrous oxide, N2O. Oxidation and nitridation are also performed in rapid thermal processors (RTP), which reduce the temperature exposure of a substrate. 

Alkaline solutions of mononitroparaffins undergo many different reactions when stored for long periods, acidified, or heated. Acidification of solutions of mononitro salts is best effected slowly at 0°C or lower with weak acids or buffered acidic mixtures, such as acetic acid—urea, carbon dioxide, or hydroxyl ammonium chloride. If mineral acids are used under mild conditions, eg, dilute HCl at 0°C, decomposition yields a carbonyl compound and nitrous oxide (Nef reaction). 

Safety provisions have proven highly effective. The nuclear power industry in the Western world, ie, outside of the former Soviet Union, has made a significant contribution of electricity generation, while surpassing the safety record of any other principal industry. In addition, the environmental record has been outstanding. Nuclear power plants produce no combustion products such as sulfuric and nitrous oxides or carbon dioxide (qv), which are... 

Quantitative aluminum deterrninations in aluminum and aluminum base alloys is rarely done. The aluminum content is generally inferred as the balance after determining alloying additions and tramp elements. When aluminum is present as an alloying component in alternative alloy systems it is commonly deterrnined by some form of spectroscopy (qv) spark source emission, x-ray fluorescence, plasma emission (both inductively coupled and d-c plasmas), or atomic absorption using a nitrous oxide acetylene flame. 

A small but important use of ammonium nitrate is in the production of nitrous oxide during the 1980s consumption for this purpose averaged about 30,000 t. The gas is generated by controlled heating of ammonium nitrate above 200°C. Nitrous oxide is used primarily as an anesthetic and as an aerosol propellant for food products (see Anesthetics Aerosols). 

Nitrous Oxide. Nitrous oxide, described by Priesdy in 1772, was first used to reHeve severe dental pain in the latter part of the 18th century. Sometime in the mid-1800s N2O was successfully used as an anesthetic, and its widespread usage coincided with the development of anesthesia machines. Nitrous oxide is a nonflammable, colorless, odorless, and tasteless gas that can exist as a Hquid under pressure at room temperature. It is normally stored in cylinders. However, it supports combustion. 

Ethylene is slightly more potent as an anesthetic than nitrous oxide, and the smell of ethylene causes choking. Diffusion through the alveolar membrane is sufficiendy rapid for equilibrium to be estabUshed between the alveolar and the pulmonary capillary blood with a single exposure. Ethylene is held both ia cells and ia plasma ia simple physical solution. The Hpoid stroma of the red blood cells absorb ethylene, but it does not combine with hemoglobin. The concentration ia the blood is 1.4 mg/mL when ethylene is used by itself for anesthesia. However, ia the 1990s it is not used as an anesthetic agent. 

Ammonium nitrate decomposes into nitrous oxide and water. In the solid phase, decomposition begins at about I50°C (302°F) but becomes extensive only above the melting point (I70°C) (338°F). The reaction is first-order, with activation energy about 40 kcal/g mol (72,000 Btii/lb mol). Traces of moisture and Cr lower the decomposition temperature thoroughly dried material has been kept at 300°C (572°F). All oxides of nitrogen, as well as oxygen and nitrogen, have been detected in decompositions of nitrates. 

The solubility coefficient S is used as a measure of water solubility. It is the ratio between the concentrations in water and air phases at equilibrium. Ethanol, a very soluble gas, has a solubility coefficient of 1 100 at, 37 C while the coefficient for nitrous oxide, a poorly soluble gas, is 0.1.5. 

Capture efficiency is the fraction of generated contaminant that is directly captured by the hood. Measurement of capture efficiency involves measuring concentration of process-generated contaminant or a tracer material. Using process-generated contaminant requires use of instruments suited to each specific contaminant and its conditions (temperature, pressure, concentration, form, etc.). In order to facilitate these measurements, a tracer is often substituted for the process-generated contaminant. The tracer is usually a gas (sulfur hexafluoride, nitrous oxide, helium, or similar), but an aerosol (particles) can also be used (potassium iodide, polystyrene particles, microbiological particles, etc.). The chosen tracer should be as similar to the real contaminant as possible, but at the same time should... 

Applications that have been tested with good results are cases where nitrous oxide has been the air contaminant of current interest or used as a tracer gas. Other applications have been carbon disulfide in a rayon factory and styrene vapor, one of the volatile components from a surface-coating material. 

Nitrous oxide is a moderately unreactive gas comprised of linear unsymmetrical molecules, as expected for a 16-electron triatomic species (p. 433). The symmetrical structure N-O-N is precluded on the basis of orbital energetics. Some physical properties are in Table 11.8 it will be seen that the N-N and N-O distances are... 

---