Nitric fluorescence

Siloxene is fluorescent and red chemiluminescence results from oxidation with ceric sulfate, chromic acid, potassium permanganate, nitric acid, and several other strong oxidants. The chemiluminescence spectmm peaks at 600 nm and has been reported (199) to give a maximum brightness of 3.43 cd/m (1 footlambert). 

Qualitative. The classic method for the quaUtative determination of silver ia solution is precipitation as silver chloride with dilute nitric acid and chloride ion. The silver chloride can be differentiated from lead or mercurous chlorides, which also may precipitate, by the fact that lead chloride is soluble ia hot water but not ia ammonium hydroxide, whereas mercurous chloride turns black ia ammonium hydroxide. Silver chloride dissolves ia ammonium hydroxide because of the formation of soluble silver—ammonia complexes. A number of selective spot tests (24) iaclude reactions with /)-dimethy1amino-henz1idenerhodanine, ceric ammonium nitrate, or bromopyrogaHol red [16574-43-9]. Silver is detected by x-ray fluorescence and arc-emission spectrometry. Two sensitive arc-emission lines for silver occur at 328.1 and 338.3 nm. 

Highly sensitive iastmmental techniques, such as x-ray fluorescence, atomic absorption spectrometry, and iaductively coupled plasma optical emission spectrometry, have wide appHcation for the analysis of silver ia a multitude of materials. In order to minimize the effects of various matrices ia which silver may exist, samples are treated with perchloric or nitric acid. Direct-aspiration atomic absorption (25) and iaductively coupled plasma (26) have silver detection limits of 10 and 7 l-lg/L, respectively. The use of a graphic furnace ia an atomic absorption spectrograph lowers the silver detection limit to 0.2 l-ig/L. 

Chemiluminescence. Chemiluminescence (262—265) is the emission of light duting an exothermic chemical reaction, generaUy as fluorescence. It often occurs ia oxidation processes, and enzyme-mediated bioluminescence has important analytical appHcations (241,262). Chemiluminescence analysis is highly specific and can reach ppb detection limits with relatively simple iastmmentation. Nitric oxide has been so analyzed from reaction with ozone (266—268), and ozone can be detected by the emission at 585 nm from reaction with ethylene. 

C-Alkaloid X obtained in minute quantity as a crystalline chloride, which with nitric acid gives an intense red colour with a violet fluorescence, and orange slowly becoming red, with ceric sulphate in sulphuric acid. 

EtOH). No methoxyl is present. It forms a series of crystalline double chlorides with cadmium, zinc or copper, does not give the thalleioquin reaction, and solutions of its sulphate are not fluorescent. It is diacidie and forms two series of salts of which the nitrate, B. HNOj, crystallises in minute prisms, m.p. 196°, insoluble in water. Cinchonamine hydrochloride, B. HCl, laminae or B. HCl. HjO, cubical crystals, has been suggested for use in the estimation of nitrates. When warmed with strong nitric acid the alkaloid furnishes dinitrocinchonamine. It gives an amorphous, monoacetyl derivative, and forms a methiodide, m.p. 208 , which with silver oxide yields an amorphous methylcinchonamine. Raymond-Hamet found that cinchonamine ves typical indole colour reactions and is probably an indole alkaloid. This seems to have been... 

The application of the fluorescence derivatization technique in an HPLC method involves utilization of a post column reaction system (PCRS) as shown in Figure 3 to carry out the wet chemistry involved. The reaction is a 2-step process with oxidation of the toxins by periodate at pH 7.8 followed by acidification with nitric acid. Among the factors that influence toxin detection in the PCRS are periodate concentration, oxidation pH, oxidation temperature, reaction time, and final pH. By far, the most important of these factors is oxidation pH and, unfortunately, there is not one set of reaction conditions that is optimum for all of the PSP toxins. The reaction conditions outlined in Table I, while not optimized for any particular toxin, were developed to allow for adequate detection of all of the toxins involved. Care must be exercised in setting up an HPLC for the PSP toxins to duplicate the conditions as closely as possible to those specified in order to achieve consistent adequate detection limits. 

Chang CJ, Javorski J, Nolan EM, Shaeng M, Lippard SJ (2004) A tautomeric zinc sensor for ratiometric fluorescence imaging application to nitric oxide-release of intracellular zinc. Proc Natl Acad Sci USA 101 1129-1134... 

Morris [814] separated microgram amounts of vanadium, chromium, manganese, iron, cobalt, nickel, copper, and zinc from 800 ml of seawater by precipitation with ammonium tetramethylenedithiocarbamate, and extraction of the chelates at pH 2.5 with methylisobutyl ketone. Solvent was removed from the extract, the residue was dissolved in 25% nitric acid, and the inorganic residue was dispersed in powdered cellulose. The mixture was pressed into a pellet for X-ray fluorescence measurements. The detection limit was 0.14 pig or better when a 10 min counting period was used. 

Wiersma and Lee [164] determined selenium in lake sediments. The sample is digested with 4 1 concentrated nitric acid 6% perchloric acid and the residue treated with 6M hydrochloric acid then reduced with H PO. The fluorescing agent used was 2,3 diaminonaphthalene. 3 2... 

Smith RC, Tennyson AG, Lim MH, Lippard SJ (2005) Conjugated polymer-based fluorescence tum-on sensor for nitric oxide. Org Lett 7 3573-3575... 

Cadmium in acidified aqueous solution may be analyzed at trace levels by various instrumental techniques such as flame and furnace atomic absorption, and ICP emission spectrophotometry. Cadmium in solid matrices is extracted into aqueous phase by digestion with nitric acid prior to analysis. A much lower detection level may be obtained by ICP-mass spectrometry. Other instrumental techniques to analyze this metal include neutron activation analysis and anodic stripping voltammetry. Cadmium also may be measured in aqueous matrices by colorimetry. Cadmium ions react with dithizone to form a pink-red color that can be extracted with chloroform. The absorbance of the solution is measured by a spectrophotometer and the concentration is determined from a standard calibration curve (APHA, AWWA and WEF. 1999. Standard Methods for the Examination of Water and Wastewater, 20th ed. Washington, DC American Public Health Association). The metal in the solid phase may be determined nondestructively by x-ray fluorescence or diffraction techniques. 

The stoichiometric compositions may he determined from cobalt analysis of nitric acid extract of the solid material by AA, ICP, or other instruments. The structural form of sulfides and their composition may be analysed by x-ray diffraction or fluorescence methods. 

Elemental composition Cu 33.36%, I 66.64%. Either compound or mineral copper(I) iodide is identified by x-ray diffraction or fluorescence method. Copper may be analyzed in nitric acid extract of copper(I) iodide by various instrumental techniques (see Copper). 

Orange crystals camphor-like odor melts at 172.5°C vaporizes at 249°C sublimes above 100°C thermally stable above 500°C insoluble in water soluble in alcohol, ether and benzene also soluble in dilute nitric acid and concentrated sulfuric acid forming a deep red solution that fluoresces. 

Manganese in aqueous solution may be analyzed by several instrumental techniques including flame and furnace AA, ICP, ICP-MS, x-ray fluorescence and neutron activation. For atomic absorption and emission spectrometric determination the measurement may be done at the wavelengths 279.5, 257.61 or 294.92 nm respectively. The metal or its insoluble compounds must be digested with nitric acid alone or in combination with another acid. Soluble salts may be dissolved in water and the aqueous solution analyzed. X-ray methods may be applied for non-destructive determination of the metal. The detection limits in these methods are higher than those obtained by the AA or ICP methods. ICP-MS is the most sensitive technique. Several colorimetric methods also are known, but such measurements require that the manganese salts be aqueous. These methods are susceptible to interference. 

Molybdenum may be identified at trace concentrations by flame atomic absorption spectrometry using nitrous oxide-acetylene flame. The metal is digested with nitric acid, diluted and analyzed. Aqueous solution of its compounds alternatively may be chelated with 8—hydroxyquinobne, extracted with methyl isobutyl ketone, and analyzed as above. The metal in solution may also be analyzed by ICP/AES at wavelengths 202.03 or 203.84 nm. Other instrumental techniques to measure molybdenum at trace concentrations include x-ray fluorescence, x-ray diffraction, neutron activation, and ICP-mass spectrometry, this last being most sensitive. 

Selenium is converted to its volatile hydride by reaction with sodium boro-hydride, and the cold hydride vapor is introduced to flame AA for analysis. Alternatively, selenium is digested with nitric acid and 30% H2O2, diluted and analyzed by furnace-AA spectrophotometer. The metal also may be analyzed by ICP-AES or ICP/MS. The wavelengths most suitable for its measurements are 196.0 nm for flame- or furnace-AA and 196.03 nm for ICP-AES. Selenium also may be measured by neutron activation analysis and x-ray fluorescence. 

Silver metal and its contents in silver alloys and salts can be measured at trace levels by various instrumental techniques such as flame- and furnace-AA, ICP-AES, ICP/MS and x-ray fluorescence methods. It is solubilized by digestion with nitric acid prior to analysis. The AA measurement may be carried out at the wavelength 328.1 nm and ICP analysis at 328.07 nm. ICP/MS is the most sensitive technique while x-ray fluorescence is relatively less sen-... 

Tungsten may be analyzed by flame AA and ICP-AES. For sucb analyses, tbe metal, its compounds, or alloys are solubilized by digestion with aqua regia, nitric acid-perchloric acid, or other acid combinations and diluted. Other instrumental techniques such as x-ray fluorescence and neutron activation analysis also are applicable. 

The analysis of 0-aluminas for stable cations can be made by a fusion process. The 0-alumina can be dissolved in molten Li2C03 (or K2C03), the resulting glass dissolved in dilute nitric acid, and the solution analyzed by atomic adsorption. Activation analysis or X-ray fluorescence analysis also can be used. 

The fluorescence properties of derivatives of oxazolo[4,5- ]pyridine has been reported by Mac et al. <2007JPP(A)188>. Martin et al. have reported the preparation of oxazolo[4,5- ]pyridine derivatives as inducible nitric oxide synthase inhibitors <2007W0045622>. 

Destruction of nitric oxide by superoxide in the buffers is more likely to account for the short half-life of nitric oxide in vitro. Superoxide dismutase (15-100 U/ml) substantially increased the apparent half-life of EDRF, strongly suggesting that superoxide contributes to the short biological half-life of nitric oxide. In the perfusion cascade bioassay system, the buffers are bubbled with 95% oxygen, contain 11 mM glucose as well as trace iron plus copper contamination and are incubated under the weak ultraviolet (UV) radiation of fluorescent lights. These are prime conditions for the autoxidation of glucose to form small amounts of superoxide in sufficient amounts to account for the short half-life of nitric oxide in nanomolar concentrations. The rate of reaction between superoxide and nitric oxide is 6.7 X 10 M sec L The shortest half-life of nitric oxide measured is approximately 6 sec. To achieve a half-life of 6 sec, the steady state concentration of superoxide would only need to be 17 pM, calculated as ln(2)/ (6 sec X 6.7 X 10 M" sec )-... 

---