Nickel oxidation, elevated temperatures

The nitro group of 4-nitropyridine-N-oxide (1) was hydrogenated preferentially over palladium in neutral medium -2 but in acid the N-oxide was also reduced (Eqn. 19.1).2 Hydrogenation of 1 or 4-nitroquinoline-N-oxide over Raney nickel at elevated temperatures and pressures resulted in the reduction of both the nitro group and the N-oxide.3.4 Hydrogenation of 2-nitropyridine-N-oxide gave only 2-aminopyridine.5... 

It is used in certain nickel-based alloys, such as the "Hastelloys(R)" which are heat-resistant and corrosion-resistant to chemical solutions. Molybdenum oxidizes at elevated temperatures. The metal has found recent application as electrodes for electrically heated glass furnaces and foreheaths. The metal is also used in nuclear energy applications and for missile and aircraft parts. Molybdenum is valuable as a catalyst in the refining of petroleum. It has found applications as a filament material in electronic and electrical applications. Molybdenum is an... 

The first process utilizes a bed of nickel catalyst which has been regenerated with hydrogen to reduce the nickel content to metallic form. The finely divided metal then reacts with impurities and retains them in the bed, probably as nickel oxide in the case of oxygen or as physisorbed compounds for other impurities. Periodically, the bed is regenerated at elevated temperature using hydrogen to restore the metallic content. The nickel process can be used and regenerated indefinitely. 

Reactions with Ammonia and Amines. Acetaldehyde readily adds ammonia to form acetaldehyde—ammonia. Diethyl amine [109-87-7] is obtained when acetaldehyde is added to a saturated aqueous or alcohoHc solution of ammonia and the mixture is heated to 50—75°C in the presence of a nickel catalyst and hydrogen at 1.2 MPa (12 atm). Pyridine [110-86-1] and pyridine derivatives are made from paraldehyde and aqueous ammonia in the presence of a catalyst at elevated temperatures (62) acetaldehyde may also be used but the yields of pyridine are generally lower than when paraldehyde is the starting material. The vapor-phase reaction of formaldehyde, acetaldehyde, and ammonia at 360°C over oxide catalyst was studied a 49% yield of pyridine and picolines was obtained using an activated siHca—alumina catalyst (63). Brown polymers result when acetaldehyde reacts with ammonia or amines at a pH of 6—7 and temperature of 3—25°C (64). Primary amines and acetaldehyde condense to give Schiff bases CH2CH=NR. The Schiff base reverts to the starting materials in the presence of acids. 

Na.tura.1 Ga.s Reforma.tion. In the United States, most hydrogen is presently produced by natural gas reformation or methane—steam reforming. In this process, methane mixed with steam is typically passed over a nickel oxide catalyst at an elevated temperature. The reforming reaction is... 

Dispersions of flake aluminum powders having surface oxide up to 14 wt % Al O have been pressed, sintered, and worked to a material known as sintered aluminum powder (SAP). This product exhibits high strength at elevated temperatures. Nickel containing small additions of thoria, known as TD-nickel, is also a high temperature cermet. 

In the acid-leaching process, the oxide ore is leached with sulfuric acid at elevated temperature and pressure, which causes nickel, but not iron, to enter into solution. The leach solution is purified, foHowed by reaction with hydrogen sulfide and subsequent precipitation of nickel and cobalt sulfides. 

Diacetone-L-sorbose (DAS) is oxidized at elevated temperatures in dilute sodium hydroxide in the presence of a catalyst (nickel chloride for bleach or palladium on carbon for air) or by electrolytic methods. After completion of the reaction, the mixture is worked up by acidification to 2,3 4,6-bis-0-isoptopyhdene-2-oxo-L-gulonic acid (2,3 4,6-diacetone-2-keto-L-gulonic acid) (DAG), which is isolated through filtration, washing, and drying. With sodium hypochlorite/nickel chloride, the reported DAG yields ate >90% (65). The oxidation with air has been reported, and a practical process was developed with palladium—carbon or platinum—carbon as catalyst (66,67). The electrolytic oxidation with nickel salts as the catalyst has also... 

The oxidation of cyclohexane to a mixture of cyclohexanol and cyclohexanone, known as KA-od (ketone—alcohol, cyclohexanone—cyclohexanol cmde mixture), is used for most production (1). The earlier technology that used an oxidation catalyst such as cobalt naphthenate at 180—250°C at low conversions (2) has been improved. Cyclohexanol can be obtained through a boric acid-catalyzed cyclohexane oxidation at 140—180°C with up to 10% conversion (3). Unreacted cyclohexane is recycled and the product mixture is separated by vacuum distillation. The hydrogenation of phenol to a mixture of cyclohexanol and cyclohexanone is usually carried out at elevated temperatures and pressure ia either the Hquid (4) or ia the vapor phase (5) catalyzed by nickel. 

Nickel increases toughness and improves low-temperature properties and corrosion resistance. Chromium and silicon improve hardness, abrasion resistance, corrosion resistance, and resistance to oxidation. Molybdenum provides strength at elevated temperatures. 

To fully understand the formation of the N13S2 scale under certain gas conditions, a brief description needs to be given on the chemical aspects of the protective (chromium oxide) Ci 203/(nickel oxide) NiO scales that form at elevated temperatures. Under ideal oxidizing conditions, the alloy Waspaloy preferentially forms a protective oxide layer of NiO and Ci 203 The partial pressure of oxygen is such that these scales are thermodynamically stable and a condition of equilibrium is observed between the oxidizing atmosphere and the scale. Even if the scale surface is damaged or removed, the oxidizing condition of the atmosphere would preferentially reform the oxide scales. 

For resistance against fatigue, Nimonic 75 has been used with Nimonic 80 and Nimonic 90. Nimonic 75 is an 80-20 nickel-chromium alloy stiffened with a small amount of titanium carbide. Nimonic 75 has excellent oxidation and corrosion resistance at elevated temperatures, a reasonable creep strength, and good fatigue resistance. In addition, it is easy to press, draw, and mold. As firing temperatures have increased in the newer gas turbine models, HA-188, a Cr, Ni-based alloy, has recently been employed in the latter section of some combustion liners for improved creep rupture strength. 

Nickel peroxide is a solid, insoluble oxidant prepared by reaction of nickel (II) salts with hypochlorite or ozone in aqueous alkaline solution. This reagent when used in nonpolar medium is similar to, but more reactive than, activated manganese dioxide in selectively oxidizing allylic or acetylenic alcohols. It also reacts rapidly with amines, phenols, hydrazones and sulfides so that selective oxidation of allylic alcohols in the presence of these functionalities may not be possible. In basic media the oxidizing power of nickel peroxide is increased and saturated primary alcohols can be oxidized directly to carboxylic acids. In the presence of ammonia at —20°, primary allylic alcohols give amides while at elevated temperatures nitriles are formed. At elevated temperatures efficient cleavage of a-glycols, a-ketols... 

Nickel and Ni-Cr alloys are among the most resistant metallic materials to corrosion and oxidation at high temperatures and are widely used to resist corrosion by gases and molten salts at elevated temperatures (see Sections 7.1 and 7.5). 

The main characteristic of attack by halogens at elevated temperatures is that most reaction products are volatile compared with the solid products that form in all cases considered hitherto in this chapter. Thus, in cases where metals are exposed to pure halogen gases large mass losses are usually reported with very little external scale formation. Li and Rapp " showed that internal chloridation occurred when nickel-chromium alloys were exposed to Ni + NiClj powders at 700-900°C. However, where oxide scales can also form, as in combustion gases, the oxide layer was usually highly... 

Conversely, the use of elevated temperatures will be most advantageous when the current is determined by the rate of a preceding chemical reaction or when the electron transfer occurs via an indirect route involving a rate-determining chemical process. An example of the latter is the oxidation of amines at a nickel anode where the limiting current shows marked temperature dependence (Fleischmann et al., 1972a). The complete anodic oxidation of organic compounds to carbon dioxide is favoured by an increase in temperature and much fuel cell research has been carried out at temperatures up to 700°C. 

Nickel is a malleable, ductile, tenacious, slightly magnetic, silvery white metal, which conducts heat and electricity fairly well. It is ferromagnetic at ordinary temperatures but becomes paramagnetic at elevated temperatures. Nickel is closely related in chemical properties to iron and cobalt. While sulphidic sources of nickel account for the world s major nickel supplies, it may be pointed out that lateritic nickel deposits (which essentially constitute an oxidic source of the metal) are more extensive than the sulphidic sources. 

---