Molecular implantation

Hiroshi Fukumura received his M.Sc and Ph.D. degrees from Tohoku University, Japan. He studied biocompatibility of polymers in the Government Industrial Research Institute of Osaka from 1983 to 1988. He became an assistant professor at Kyoto Institute of Technology in 1988, and then moved to the Department of Applied Physics, Osaka University in 1991, where he worked on the mechanism of laser ablation and laser molecular implantation. Since 1998, he is a professor in the Department of Chemistry at Tohoku University. He received the Award of the Japanese Photochemistry Association in 2000, and the Award for Creative Work from The Chemical Society Japan in 2005. His main research interest is the physical chemistry of organic molecules including polymeric materials studied with various kinds of time-resolved techniques and scanning probe microscopes. 

Ion Implantation Systems. An ion implantation system is used to accelerate ionized atomic or molecular species toward a target sample. The ionized species penetrates the surface of the sample with the resulting depth profile dependent on the implanted species mass, energy, and the sample target s tilt and rotation. An implanter s main components include an ionizer, mass separator, acceleration region, scanning system, and sample holder (168). 

Poliglecaprone-25 is a copolymer of 75% glycoHde and 25% caprolactone. The molecular weight and the percentages of glycoHde and caprolactone are not the same as the coating polymer on Dexon II, but the stmcture (3) is as shown for that polymer. The suture is distributed under the trade name Monocryl. It is claimed to retain approximately 20 to 30% of its strength two weeks after implantation and to be absorbed ia 91 to 119 days. 

Hexachlorocyclotriphosphazene (cycHc trimer) is a respiratory irritant. Nausea has also been noted on exposure (10). Intravenous and intraperitoneal toxicity measurements were made on mice. The highest nonlethal dose (LDq) was measured as 20 mg/kg (11). Linear chloropolymer is also beUeved to be toxic (10). Upon organic substitution, the high molecular weight linear polymers have been shown to be inert. Rat implants of eight different polyphosphazene homopolymers indicated low levels of tissue toxicity (12). EZ has been found to be reasonably compatible with blood (13), and has lower hpid absorption than fiuorosihcone. 

Recent applications of e-beam and HF-plasma SNMS have been published in the following areas aerosol particles [3.77], X-ray mirrors [3.78, 3.79], ceramics and hard coatings [3.80-3.84], glasses [3.85], interface reactions [3.86], ion implantations [3.87], molecular beam epitaxy (MBE) layers [3.88], multilayer systems [3.89], ohmic contacts [3.90], organic additives [3.91], perovskite-type and superconducting layers [3.92], steel [3.93, 3.94], surface deposition [3.95], sub-surface diffusion [3.96], sensors [3.97-3.99], soil [3.100], and thermal barrier coatings [3.101]. 

Polybutadienes, polycaprolactones, polycarbonates, and amine-terminated polyethers (ATPEs) are shown in Scheme 4.4 as examples of other commercially available polyols. They are all specialty materials, used in situations where specific property profiles are required. For example, ATPEs are utilized in spray-applied elastomers where fast-reacting, high-molecular-weight polyamines give quick gel times and rapid viscosity buildup. Polycarbonates are used for implantation devices because polyuredtanes based on them perform best in this very demanding environment. Polycaprolactones and polybutadienes may be chosen for applications which require exceptional light stability, hydrolysis resistance, and/or low-temperature flexibility. 

MBE growth of very thin layer of boron and silicon. The problems associated with boron implant and laser anneal can be overcome by growing a very thin (5 nm) layer of silicon with boron atoms on the backside of the thinned CCD (1% boron, 99% silicon). The growth is applied by molecular beam epitaxy (MBE) machines. This process was developed by JPL and MIT/LL. 

TOF-SIMS has important potentials in many areas of life science, in fundamental and applied research as well as in product development and control. This holds for the characterization of biological cells and tissues, of sensor and microplate arrays, of drug delivery systems, of implants, etc. In all these areas, relevant surfaces feature a very complex composition and structure, requiring the parallel detect ion of many different molecular species as well as metal and other elements, with high sensitivity and spatial resolution requirements, which are exactly met by TOF-SIMS. 

Molecular dynamics simulation (MDS) is a powerful tool for the processing mechanism study of silicon surface fabrication. When a particle impacts with a solid surface, what will happen Depending on the interaction between cluster and surface, behaviors of the cluster fall into several categories including implantation [20,21], deposition [22,23], repulsion [24], and emission [25]. Owing to limitations of computer time, the cluster that can be simulated has a diameter of only a few nanometres with a small cohesive energy, which induces the cluster to fragment after collision. 

Biodegradation times vary depending on implant surface area, porosity, and molecular weight. 

FIGURE 20 Rate of metabolism of PCL and its metabolites, determined from measurement of carbon-14 in the excreta and exhaled air of rats after implantation (s.c.) of the low molecular weight polymer. (From Ref. 53.)... 

---