2-methyl-1,3-butadiene hydrogenation

Potentially explosive reaction with nitric acid + sulfuric acid, bromine trifluoride, nitrosyl chloride + platinum, nitrosyl perchlorate, chromyl chloride, thiotrithiazyl perchlorate, and (2,4,6-trichloro-l, 3,5-triazine + water). Reacts to form explosive peroxide products with 2-methyl-1,3-butadiene, hydrogen peroxide, and peroxomonosulfuric acid. Ignites on contact with activated carbon, chromium trioxide, dioxygen difluoride + carbon dioxide, and potassium-tert-butoxide. Reacts violendy with bromoform, chloroform + alkalies, bromine, and sulfur dichloride. 

Poly(propylene-a/r-ethylene, multiarm 127883-08-3 Benzene, diethenyl-, polymer with 2-methyl-1,3-butadiene, hydrogenated < (C loHio -CsHg),... 

Commission Recommendation of 29 April 2004 on the results of the risk evaluation and the risk reduction strategies for the substances acetonitrile acrylamide acrylonitrile acrylic acid butadiene hydrogen fluoride hydrogen peroxide methacrylic acid methyl methacrylate toluene trichlorobenzene (2004/394/EC) 30.4.2004, Official Journal of the European Union, EC, 2004, No.L.144. 

A claim has been made in patents issued to Auzies (374) that nicotine can be prepared on an industrial scale from ammonia and butadiene. This process is reported to involve the production of pyrrole by the catalytic interaction of ammonia and butadiene, the methylation and hydrogenation of pyrrole, the conversion of ZV-methylpyrrolidine to 8-chloropyridine by heating over a thorium catalyst with chloroform, and the interaction of /8-chloropyridine with A-methylpyrrolidine over the same catalyst. The process, however, does not seem to have been put into practice and the reactions described have never been confirmed by a precise chemical investigation. 

Basic metal oxides are active in diene hydrogenation to mono-olefins. MgO prepared from Mg(0H)2 by calcination at 1373K is highly selective in butadiene hydrogenation to cis-2-butene. A-isopropenyl-methyl-cyclohexene in the... 

Results of the Risk Evaluation and the Risk Reduction Strategies for the Substances Acetonitrile Acrylamide Acrylonitrile Acrylic acid Butadiene Hydrogen fluoride Hydrogen peroxide Methacrylic acid Methyl methacrylate Toluene Trichlorobenzene. (notified under document number C(2004) 1446) (Text with EEA relevance) (2004/394/EC). Available at http //esis.jrc.ec.europa.eu/doc/risk assess-ment/OJ RECOMMENDAT10N / ojrecl08883.pdf (accessed October 25,2013). 

CH2 CH C CH. Colourless gas with a sweet odour b.p. 5°C. Manufactured by the controlled low-temperature telomerization of ethyne in the presence of an aqueous solution of CuCI and NH Cl. Reduced by hydrogen to butadiene and, finally, butane. Reacts with water in the presence of HgSO to give methyl vinyl ketone. Forms salts. Forms 2-chloro-butadiene (chloroprene) with hydrochloric acid and certain metallic chlorides. 

Addition of hydrogen chloride to 2 methyl 1 3 butadiene is a kmetically controlled reaction and gives one product in much greater amounts than any isomers What is this product ... 

The labile hydroxyl group is easily replaced by treatment with thionyl chloride, phosphorous chlorides, or even aqueous hydrogen haUdes. At low temperatures aqueous hydrochloric (186) or hydrobromic (187) acids give good yields of 3-halo-3-methyl-l-butynes. At higher temperatures these rearrange, first to l-halo-3-methyl-1,2-butadienes, then to the corresponding 1,3-butadienes (188,189). 

Fig. 1. SAE J200 Classification system for ASTM No. 3 oil where in volume swell nr = no requirement. EPDM is ethylene—propylene—diene monomer HR, butyl mbber SBR, styrene—butadiene mbber NR, natural mbber VMQ, methyl vinyl siUcone CR, chloroprene FKM, fluoroelastomer FVMQ, fluorovinyl methyl siUcone ACM, acryUc elastomers HSN, hydrogenated nitrile ECO, epichlorohydrin and NBR, nitrile mbber.

Isoprene (2-methyl-1,3-butadiene) can be telomerized in diethylamine with / -butyUithium as the catalyst to a mixture of A/,N-diethylneryl- and geranylamines. Oxidation of the amines with hydrogen peroxide gives the amine oxides, which, by the Meisenheimer rearrangement and subsequent pyrolysis, produce linalool in an overall yield of about 70% (127—129). 

By-products from EDC pyrolysis typically include acetjiene, ethylene, methyl chloride, ethyl chloride, 1,3-butadiene, vinylacetylene, benzene, chloroprene, vinyUdene chloride, 1,1-dichloroethane, chloroform, carbon tetrachloride, 1,1,1-trichloroethane [71-55-6] and other chlorinated hydrocarbons (78). Most of these impurities remain with the unconverted EDC, and are subsequendy removed in EDC purification as light and heavy ends. The lightest compounds, ethylene and acetylene, are taken off with the HCl and end up in the oxychlorination reactor feed. The acetylene can be selectively hydrogenated to ethylene. The compounds that have boiling points near that of vinyl chloride, ie, methyl chloride and 1,3-butadiene, will codistiU with the vinyl chloride product. Chlorine or carbon tetrachloride addition to the pyrolysis reactor feed has been used to suppress methyl chloride formation, whereas 1,3-butadiene, which interferes with PVC polymerization, can be removed by treatment with chlorine or HCl, or by selective hydrogenation. 

In the petroleum (qv) industry hydrogen bromide can serve as an alkylation catalyst. It is claimed as a catalyst in the controlled oxidation of aHphatic and ahcycHc hydrocarbons to ketones, acids, and peroxides (7,8). AppHcations of HBr with NH Br (9) or with H2S and HCl (10) as promoters for the dehydrogenation of butene to butadiene have been described, and either HBr or HCl can be used in the vapor-phase ortho methylation of phenol with methanol over alumina (11). Various patents dealing with catalytic activity of HCl also cover the use of HBr. An important reaction of HBr in organic syntheses is the replacement of aHphatic chlorine by bromine in the presence of an aluminum catalyst (12). Small quantities of hydrobromic acid are employed in analytical chemistry. 

Another alternative method to produce sebacic acid iavolves a four-step process. First, butadiene [106-99-0] is oxycarbonylated to methyl pentadienoate which is then dimerized, usiag a palladium catalyst, to give a triply unsaturated dimethyl sebacate iatermediate. This unsaturated iatermediate is hydrogenated to dimethyl sebacate which can be hydrolyzed to sebacic acid. Small amounts of branched chain isomers are removed through solvent crystallizations giving sebacic acid purities of greater than 98% (66). 

G-20 Dicarboxylic Acids. These acids have been prepared from cyclohexanone via conversion to cyclohexanone peroxide foUowed by decomposition by ferrous ions in the presence of butadiene (84—87). Okamura Oil Mill (Japan) produces a series of commercial acids based on a modification of this reaction. For example, Okamura s modifications of the reaction results in the foUowing composition of the reaction product C-16 (Linear) 4—9%, C-16 (branched) 2—4%, C-20 (linear) 35—52%, and C-20 (branched) 30—40%. Unsaturated methyl esters are first formed that are hydrogenated and then hydrolyzed to obtain the mixed acids. Relatively pure fractions of C-16 and C-20, both linear and branched, are obtained after... 

Cold hydrogenation may also be used for the selective hydrogenation of butadiene and for the selective hydrogenation of methyl acetylene and pro-padiene in propylene feedstocks (K22). 

The reaction of crotonaldehyde and methyl vinyl ketone with thiophenol in the presence of anhydrous hydrogen chloride effects conjugate addition of thiophenol as well as acetal formation. The resulting j3-phenylthio thioacetals are converted to 1-phenylthio-and 2-phenylthio-1,3-butadiene, respectively, upon reaction with 2 equivalents of copper(I) trifluoromethanesulfonate (Table I). The copper(I)-induced heterolysis of carbon-sulfur bonds has also been used to effect pinacol-type rearrangements of bis(phenyl-thio)methyl carbinols. Thus the addition of bis(phenyl-thio)methyllithium to ketones and aldehydes followed by copper(I)-induced rearrangement results in a one-carbon ring expansion or chain-insertion transformation which gives a-phenylthio ketones. Monothioketals of 1,4-diketones are cyclized to 2,5-disubstituted furans by the action of copper(I) trifluoromethanesulfonate. ... 

The addition of 0,0-diethyl hydrogen dithiophosphate to diethyl (3-methyl-l,2-butadiene)phosphonate (171 R=H) occurs at the 1,2-double bond, but on introduction of a vinyl group... 

Hexadiene which is formed by 1,4-addition of hydrogen and a vinyl group to butadiene, is the predominant product in the codimerization reaction. However, there is always a small amount (1-3%) of 3-methyl-... 

Absolute rates for the addition of the methyl radical and the trifluoromethyl radical to dienes and a number of smaller alkenes have been collected by Tedder (Table l)3. Comparison of the rate data for the apolai4 methyl radical and the electrophilic trifluoromethyl radical clearly show the electron-rich nature of butadiene in comparison to ethylene or propene. This is also borne out by several studies, in which relative rates have been determined for the reaction of small alkyl radicals with alkenes. An extensive list of relative rates for the reaction of the trifluoromethyl radical has been measured by Pearson and Szwarc5,6. Relative rates have been obtained in these studies by competition with hydrogen... 

The reactions of l-t-butyl-3-methylallene with several alkenes, e.g. IV-phenylmalei-mide, acrylonitrile and methyl acrylate, afforded exclusively [4 + 2] cycloadducts of 1-t-butyl-l,3-butadiene, which had been formed from l-t-butyl-3-methylallene by a [1,3] sigmatropic rearrangement12. The reaction of l-t-butyl-3-methylallene with 1,1-dichloro-2,2-difluoroethene occurred more rapidly than the hydrogen shift, which allowed the... 

Copper-catalyzed monoaddition of hydrogen cyanide to conjugated alkenes proceeded very conveniently with 1,3-butadiene, but not with its methyl-substituted derivatives. The most efficient catalytic system consisted of cupric bromide associated to trichloroacetic acid, in acetonitrile at 79 °C. Under these conditions, 1,3-butadiene was converted mainly to (Z )-l-cyano-2-butene, in 68% yield. A few percents of (Z)-l-cyano-2-butene and 3-cyano-1-butene (3% and 4%, respectively) were also observed. Polymerization of the olefinic products was almost absent. The very high regioselectivity in favor of 1,4-addition of hydrogen cyanide contrasted markedly with the very low regioselectivity of acetic acid addition (vide supra). Methyl substituents on 1,3-butadiene decreased significantly the efficiency of the reaction. With isoprene and piperylene, the mononitrile yields were reduced... 

The reaction of 2,3-dimethyl-l,3-butadiene with an equimolar amount of chlorine in carbon tetrachloride at — 20 °C has instead been reported593 to give mainly trans-1,4-dichloro-2,3-dimethyl-2-butene and 2-chloromethyl-3-methyl-l,3-butadiene, arising from the loss of one of the acidic hydrogen atoms in the ionic intermediate (equation 28). 

---