Metal functions

Gundlach K H and Kadlech J 1974 The influence of the oxide film on the current in AI-AI oxide-fatty acid monolayer-metal functions Chem. Phys. Lett. 25 293-5... 

Nickel and other transition metals function as solvent-catalysts for the transformation of carbon species into the diamond aHotrope. At temperatures high enough to melt the metal or metal—carbon mixture and at pressures high enough for diamond to be stable, diamond forms by what is probably an electronic mechanism (see Carbon, diamond-synthetic). 

These trends are sketched in Fig. 2-3. We argue that while the energy matching favours strongest participation of the 3d function amongst the metal functions, these orbitals are sufficiently withdrawn or contracted that their poor overlap with ligand functions leaves the metal 45 orbital as the dominant metal contribution in the bonding. 

Experimentally, spin-allowed d-d bands (we use the quotation marks again) are observed with intensities perhaps 100 times larger than spin-forbidden ones but still a few orders of magnitude (say, two) less intense than fully allowed transitions. This weakness of the d-d bands, alluded to in Chapter 2, is a most important pointer to the character of the d orbitals in transition-metal complexes. It directly implies that the admixture between d and p metal functions is small. Now a ligand function can be expressed as a sum of metal-centred orbitals also (see Box 4-1). The weakness of the d-d bands also implies that that portion of any ligand function which looks like a p orbital when expanded onto the metal is small also. Overall, therefore, the great extent to which d-d bands do satisfy Laporte s rule entirely supports our proposition in Chapter 2 that the d orbitals in Werner-type complexes are relatively well isolated (or decoupled or unmixed) from the valence shell of s and/or p functions. 

Another patent apphcation (28) describes the use of zeolite/TUD-1 with optionally a metal function for a variety of reactions. In an example, as-synthesized MCM-22 / TUD-1 was tested for acylation of 2-methoxynaphthalene with acetic anhydride to 2-acetyl-6-methoxynaphthalene at 240°C. After reaction for six hours, conversion of 2-methoxynaphthalene reached 56% with 100% selectivity to 2-acetyl-6-methoxynaphthalene. Other zeolite catalysts were similarly tested, but none were nearly as effective. 

Hence the 30 % that are lost could be on the support and slowly react with 1-hexanol to form HA. However when aniline is reacted there is no significant loss of material, which suggests that aniline cannot interact directly with the surface hydroxyls. This suggests that the interaction between aniline and the support hydroxyls is not as simple as shown above, rather it is more likely that the reaction operates via a spillover mechanism involving an intermediate in the nitrobenzene hydrogenation sequence rather than aniline. The alkylation reaction between aniline and 1-hexanol takes place on the metal function, therefore the reaction with the missing aniline associated with the support will be slow as it requires a reverse spillover and a diffusion across the support surface. 

The classical HCK mechanism on bifunctional catalysts separates the metallic action from that of the acid by assigning the metallic function to the creation of an olefin from paraffin and the isomerization and cracking of the olefins to the acid function. Both reactions are occurring through carbenium ions [102],... 

Of the metals that were just listed as the major participants in biochemical functions, some (such as Mg and Zn) rarely change oxidation states. Therefore, metals such as these are involved in processes in which there is no redox chemistry taking place. These metals function in some other way. On the other hand, metals such as Fe, Mn, Mo, and Cu can change oxidation states more easily, so they are the metals that participate in redox reactions. For example, the role of iron in oxygen transport requires it to bond to oxygen and thereby, at least formally, to become oxidized in the process. There are other instances of this type of behavior. As mentioned earlier, the list of metals that are involved in the vast majority of biochemical processes is not a particularly long one. 

In order to combine the catalytic activity of highly dispersed metal species and that of zeolites, metals can be deposited in the pores and on the external surface of zeolite particles. In this way, a catalyst is formed with both a metal functionality, e.g., redox or hydrogenation activity, and an acidic function. The metals can be deposited by different methods. Impregnation of a zeolite with a metal... 

Other than this system, metallated polysilanes contain the metal in low-valent oxidation states. Such systems have been reported by two groups. In 1995, an alternative functionalization route starting from poly[methyl(H)silylene] or poly[methyl(H)silylene-fo-methylphenylsilylene], 37, was reported, in which the polysilane Si-H moiety was hydro-silated using 1,3,5-hexatriene, affording the diene-modified polymer 67, which was metal functionalized using triiron dodecacarbonyl to give the iron tricarbonyl-polysilane coordination complex, 68.177... 

Scheme 22 Metal functionalization of poly(methylphenylsilylene) via chloromethylation.

The straightforward generation of lithiated allenes [31], in particular lithiated donor-substituted allenes [32], has opened up smooth and efficient routes to further metallated functionalized allenes. By transmetallation, metals such as magnesium,... 

Worked Example 3.5. A new means of extracting nickel from its ore is being investigated. The first step is to crush the rock to powder, roast it, and then extract soluble nickel species (as Ni " ") into an aqueous solution. The activity, a(Ni +), is monitored by a potentiometric method, where a wire of pure nickel metal functions as an electrode and is immersed in aliquot samples taken from the plant. This wire monitors the electrode potential NP+,Ni.If 2+,Ni =-0-230 V, what is if afNi " ) = 10... 

A common feature of any cyclization reaction is that a new intramolecular C—C bond is produced that would not have been formed in the absence of the catalyst. Those reactions in which one ring closure step is sufficient to explain the formation of a given cyclic product will be called simple cyclization processes, although their mechanism is, as a rule, complex. We shall distinguish those cases in which any additional skeletal rearrangement step(s) is (are) required to explain the process. Some specific varieties of hydrocarbon ring closure processes are not included. A recent excellent review deals with the formation of a second ring in an alkyl-substituted aromatic compound (12). Dehydrocyclodimerization reactions have also to be omitted—all the more since it is doubtful whether a metallic function itself is able to catalyze this process (13). 

There are two types of reaction involving metals (1) in which the metal is a reagent and is consumed in the process and (2) in which the metal functions as a catalyst. While it is certainly true that any cleansing of metallic surfaces will enhance their chemical reactivity, in many cases it would seem that this effect alone is not sufficient to explain the extent of the sonochemically enhanced reactivity. In such cases it is thought that sonication serves to sweep reactive intermediates, or products, clear of the metal surface and thus present renewed clean surfaces for reaction. Other ideas include the possibility of enhanced single electron transfer (SET) reactions at the surface. 

Characterizing the size, location and chemistry of small metal particles that provide the metal functionality in a catalyst is important for both the development of a catalyst as well as identifying whether unusual performance in service is caused by the metal function. The advantage of using microscopy for the characterization of the metal clusters is that it is site-specific. 

Isomerization of olefins or paraffins is an acid-catalyzed reaction that can be carried out with any number of strong acids, including mineral acids, sulfated metal oxides, zeolites and precious metal-modified catalysts [10]. Often the catalyst contains both an acid function and a metal function. The two most prevalent catalysts are Pt/chlorided AI2O3 and Pt-loaded zeolites. The power of zeoHtes in this reaction type is due to their shape selectivity [11] and decreased sensitivity to water or other oxygenates versus AICI3. It is possible to control the selectivity of the reaction to the desired product by using a zeoHte with the proper characteristics [12]. These reactions are covered in more detail in Chapter 14. 

Ethylbenzene Isomerization Isomerization of EB requires both metal and acid function. Hydrogenation results in an intermediate naphthene. The acid function is required to isomerize the naphthene to a methyl-ethyl-substituted five-mem-bered ring species that can further convert to a dimethyl-substituted six-membered ring naphthene. This can be dehydrogenated by the metal function to a xylene isomer, OX in the example shown in Figure 14.9. 

The presence of metal may catalyze demethylation and can occur to some extent in catalysts where the metal function is under-passivated, as by incomplete sulfiding. This would convert valuable xylenes to toluene. The demethylation reaction is usually a small contributor to xylene loss. Metal also catalyzes aromatics saturation reactions. While this is a major and necessary function to facilitate EB isomerization, any aromatics saturation is undesirable for the process in which xylene isomerization and EB dealkylation are combined. Naphthenes can also be ring-opened and cracked, leading to light gas by-products. The zeolitic portion of the catalyst participates in the naphthene cracking reactions. Cracked by-products can be more prevalent over smaller pore zeolite catalysts. 

The catalysts for xylene isomerization with EB dealkylahon are dominated by MFI zeolite. The de-ethylation reaction is particularly facile over this zeolite. There have been several generations of catalyst technology developed by Mobil, now ExxonMobil [84]. The features in their patents include selectivation and two-catalyst systems in which the catalysts have been optimized separately for deethylation of EB and xylene isomerization [85-87]. The crystallite size used for de-ethylation is significantly larger than in the second catalyst used for xylene isomerization. Advanced MHAI is one example. The Isolene process is offered by Toray and their catalyst also appears to be MFI zeoUte-based, though some patents claim the use of mordenite [88, 89]. The metal function favored in their patents appears to be rhenium [90]. Bimetallic platinum catalysts have also been claimed on a variety of ZSM-type zeolites [91]. There are also EB dealkylation catalysts for the UOP Isomar process [92]. The zeolite claimed in UOP patents is MFI in combination with aluminophosphate binder [93]. 

---