Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Prevalent catalysts

Isomerization of olefins or paraffins is an acid-catalyzed reaction that can be carried out with any number of strong acids, including mineral acids, sulfated metal oxides, zeolites and precious metal-modified catalysts [10]. Often the catalyst contains both an acid function and a metal function. The two most prevalent catalysts are Pt/chlorided AI2O3 and Pt-loaded zeolites. The power of zeoHtes in this reaction type is due to their shape selectivity [11] and decreased sensitivity to water or other oxygenates versus AICI3. It is possible to control the selectivity of the reaction to the desired product by using a zeoHte with the proper characteristics [12]. These reactions are covered in more detail in Chapter 14. [Pg.356]

The most prevalent catalysts are homogeneous metal complexes mostly with chiral diphosphine ligands, isolated enzymes and whole cell preparations, whereas... [Pg.13]

The most prevalent catalyst metals are Ru, Rh, and Ti only 7 of the 79 processes in Table 4 work with catalysts that are not noble or transition metal based. [Pg.315]

Many organic electrode processes require the adsorption of the electroactive species at the electrode surface before the electron transfer can occur. This adsorption may take the form of physical or reversible chemical adsorption, as has been commonly observed at a mercury/water interface, or it may take the form of irreversible, dissociative chemical adsorption where bond fracture occurs during the adsorption process and often leads to the complete destruction of the molecule. This latter t q)e of adsorption is particularly prevalent at metals in the platinum group and accounts for their activity as heterogeneous catalysts and as... [Pg.165]

The prevalence of the heme in O2 metabolism and the discovery in the 1960s that metallophthalocyanines adsorbed on graphite catalyze four-electron reduction of O2 have prompted intense interest in metaUoporphyrins as molecular electrocatalysts for the ORR. The technological motivation behind this work is the desire for a Pt-ffee cathodic catalyst for low temperature fuel cells. To date, three types of metaUoporphyrins have attracted most attention (i) simple porphyrins that are accessible within one or two steps and are typically available commercially (ii) cofacial porphyrins in which two porphyrin macrocycles are confined in an approximately stacked (face-to-face) geometry and (iii) biomimetic catalysts, which are highly elaborate porphyrins designed to reproduce the stereoelectronic properties of the 02-reducing site of cytochrome oxidase. [Pg.685]

An additional mechanism affects the deposits formation from the H-Oil reactor, rejection of vanadium and nickel sulfides from the catalyst. In the vacuum tower, asphaltene precipitation was found to be the prevalent fouling mechanism. In asphaltene... [Pg.53]

Another way in which catalyst deactivation may affect performance is by blocking catalyst pores. This is particularly prevalent during fouling, when large aggregates of materials may be deposited upon the catalyst surface. The resulting increase in diffu-sional resistance may dramatically increase the Thiele modulus, and reduce the effectiveness factor for the reaction. In extreme cases, the pressure drop through a catalyst bed may also increase dramatically. [Pg.216]

As an example, when automotive catalytic mufflers and converters were introduced many years ago, the automobile industry required the petrochemical industry to eliminate lead from gasoline since lead degraded and reduced the effectiveness of the catalyst and caused the destruction of the gasoline. One set of industrial compounds that can harm catalysts are halogens, a family of compounds that include chlorine, bromine, iodine, and fluorine. Bromine, while not prevalent in industry, is present in chemical plants. Freons are fluorine compounds. Silicone is another compound that is deleterious to catalysts. It is used as a slip agent, or a lubricant, in many industrial processes. Phosphorous, heavy metals (zinc, lead), sulfur compounds, and any particulate can result in shortening the life of the catalyst. It is necessary to estimate the volume or the amount of each of those contaminants, to assess the viability of catalytic technologies for the application. [Pg.250]

Ruthenium (Ru), rhodium (Rh), and cobalt (Co) form the most active and versatile catalysts, with a prevalence for Ru effective catalysts have been reported also for other metals such as Ni, Pd, Pt, Cr, W, Mo, Mn, Nb, and Ta, some of which, however, are selective for the partial reduction of polynuclear aromatics. [Pg.458]


See other pages where Prevalent catalysts is mentioned: [Pg.48]    [Pg.370]    [Pg.198]    [Pg.302]    [Pg.278]    [Pg.48]    [Pg.370]    [Pg.198]    [Pg.302]    [Pg.278]    [Pg.327]    [Pg.187]    [Pg.260]    [Pg.88]    [Pg.94]    [Pg.475]    [Pg.12]    [Pg.43]    [Pg.4]    [Pg.29]    [Pg.76]    [Pg.530]    [Pg.183]    [Pg.334]    [Pg.353]    [Pg.121]    [Pg.194]    [Pg.159]    [Pg.39]    [Pg.171]    [Pg.76]    [Pg.583]    [Pg.179]    [Pg.182]    [Pg.202]    [Pg.209]    [Pg.215]    [Pg.217]    [Pg.379]    [Pg.2]    [Pg.654]    [Pg.195]    [Pg.1219]    [Pg.340]    [Pg.9]    [Pg.260]   
See also in sourсe #XX -- [ Pg.302 ]




SEARCH



Prevalence

Prevalency

© 2024 chempedia.info