Latex polyurethane

Plastic C mixture without nylon, latex, polyurethane, and acetate. 

Material carbon steel lined with neoprene latex polyurethane insulation Surface area 875 m exposed to air (say 9(X)), 227 to ground (say 250). 

Mouth PrOtOCtOrS. The widespread growth of contact sports has accelerated the use of mouth guards (34,35). Guards may be produced from natural rubber, poly(vinyl chloride), poly(vinyl acetate-co-ethylene), or polyurethane materials. Customized guards are often fabricated from poly(vinyl acetate-co-ethylene) blanks, soft acrylic dough, liquid rubber latex, polyurethane, and laminated thermoplastic (36,37). Over the counter protectors usually fit poorly, in contrast to dimensionally stable and comfortable, customized mouth protectors. 

In addition to the synthesis of latexes with high solids content and small particle size, in the past decade, microemulsion polymerization has heen used to synthesize a wide range of materials. For instance, several works have incorporated inorganic materials such as carhon nanotuhes, " ZnO nanoparticles (UV absorption),montmorillonite clay, " and quantum dots (luminescence probes) " to produce nanocomposites. Furthermore, nanogels, " conductive polypyrrole and polyaniline latexes, " " polyurethanes using immiscible monomers, and polymers in water-in-scC02 microemulsions have been also prepared by microemulsion polymerization. 

Various geometric coring patterns ki polyurethanes (171,175) and ki latex foam mbber (176) exert significant influences on thek compressive behavior. A good discussion of the effect of cell size and shape on the properties of flexible foams is contained ki References 60 and 156. The effect of open-ceU content is demonstrated ki polyethylene foam (173). 

Tensile Strength and Elongation. The tensile strength of latex mbber foam has been shown to depend on the density of the foam (149,177) and on the tensile strength of the parent mbber (177,178). At low densities the tensile modulus approximates a linear relation with density but kicreases with a higher power of density at higher densities. Similar relations hold for polyurethane and other flexible foams (156,179,180). 

The tensile elongation of soHd latex mbber has been shown to correlate well with the elongation of foam from the latex (178). The elongation of flexible polyurethane has been related to cell stmcture (180,181). 

Inversion ofMon cjueous Polymers. Many polymers such as polyurethanes, polyesters, polypropylene, epoxy resins (qv), and siHcones that cannot be made via emulsion polymerization are converted into latices. Such polymers are dissolved in solvent and inverted via emulsification, foUowed by solvent stripping (80). SoHd polymers are milled with long-chain fatty acids and diluted in weak alkaH solutions until dispersion occurs (81). Such latices usually have lower polymer concentrations after the solvent has been removed. For commercial uses the latex soHds are increased by techniques such as creaming. 

Hyperbranched polyurethanes are constmcted using phenol-blocked trifunctional monomers in combination with 4-methylbenzyl alcohol for end capping (11). Polyurethane interpenetrating polymer networks (IPNs) are mixtures of two cross-linked polymer networks, prepared by latex blending, sequential polymerization, or simultaneous polymerization. IPNs have improved mechanical properties, as weU as thermal stabiHties, compared to the single cross-linked polymers. In pseudo-IPNs, only one of the involved polymers is cross-linked. Numerous polymers are involved in the formation of polyurethane-derived IPNs (12). 

Another compound, the antimicrobial action of which is associated with chelation, is 2-pyridinethiol-A/-oxide [3811-73-2] (Omadine). Activity has been shown to depend on coordinating property. The iron chelate is active, but not the free pyridine compound (200). In the form of its zinc chelate it is found in shampoos to control seborrheic dermatitis (201). Other appHcations of this useful chemical include preservation of adhesives, plastics, latex paints, polyurethane foam, and metal working fluids (202). 

Figure 27.8. Typical load-deflection curves for (a) latex, (b) flexible PVC, (c) polyester polyurethane (curve C) and polyether polyurethane foams (curve D). Shell Chemical Co.)...

Thickeners. Thickeners increase the viscosity of the polychloroprene latex adhesives. Amounts up to 1% of polyacrylates, methyl cellulose, alginates and polyurethane thickeners can be used. Particular attention should be paid to fluctuations in pH when thickener is added in the formulations. For low-pH (7-10) formulations, fumed silica or some silicates can be used. 

In 1994, the worldwide consumption of rubber was approximately 14.5 million tons a year, of which about 40% consisted of natural rubber. Natural rubber is produced as latex by tropical rubber trees (Hevea brasiliensis). It is processed locally and therefore the quality of natural rubber fluctuates remarkably [ 140]. Due to increasing demand for rubbers, combined with a decreasing production capacity in Asia and a vast increase in labor costs, the price of natural rubber is still rising sharply. In 1990-1994, the average price of natural rubber was about 0.38 /lb, while in 1996 it was already over 0.80 /lb. The remaining 60% of the articles were manufactured from synthetic petroleum-based rubbers such as isoprene rubber, styrene-butadiene rubber, chloroprene rubber and polyurethanes. The quality of synthetic rubbers is constant, and their price varies between 2 and 5 US per kilogram [137-140]. 

A method of manufacturing rubber articles by pouring a compounded latex into an absorbent hollow mould the skin of rubber thus formed is removed, dried and vulcanised. The term is also apphed to the pouring into moulds of liquid polymer systems based on silicone or polyurethane elastomers. 

Organic polymers and resins have also been used for zeolite binding. An early example is the use polyurethane in the formahon of vibration-resistant zeolite porous bodies for refrigerant drying [90]. Organic binders such as cellulose acetate and other cellulose-based polymers have also used to mitigate problems with binder dissolution in aqueous phase separations [91, 92]. Latex has also been used as a water-stable organic binder [93]. More recently, thermoplastic resins, such as polyethylene have also been used as binders for zeolites [94]. 

Vultafoam Polyurethane foam General Latex Chemical... 

Compound SBR latex backing adhesive PVC" backing Polyurethane backing... 

The coatings industry has developed waterborne paints and coatings that greatly reduce VOC emissions. Some applications include automotive coatings, interior latex paints, and polyurethane coatings (Sherman et al., 1998). 

A urethane latex composition, (I), was prepared by Kent et al. (1) and used as an in situ delivery agent for 4-hydroxyl-methyl benzoate, which was useful as an image stabilizer. Polyurea, (II), and polyurethane latex compositions were also prepared by the authors (2) containing pendant acid groups as latex stabilizers and as crosslinking sites. 

The first modem polyurethanes were developed in Germany in the late 1930s as attempts to produce polymer systems that would be useful as substitutes for natural latex rubber in automobile and truck tires, clearly in preparation for war. 

HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HMX HNS NTO NTO/HMX NTO/HMX NTO/HMX PETN PETN PETN PETN PETN PETN PETN PETN PETN PETN RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX RDX TATB/HMX Cariflex (thermoplastic elastomer) Hydroxy-terminated polybutadiene (polyurethane) Hydroxy-terminated polyester Kraton (block copolymer of styrene and ethylene-butylene) Nylon (polyamide) Polyester resin-styrene Polyethylene Polyurethane Poly(vinyl) alcohol Poly(vinyl) butyral resin Teflon (polytetrafluoroethylene) Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Cariflex (block copolymer of butadiene-styrene) Cariflex (block copolymer of butadiene-styrene) Estane (polyester polyurethane copolymer) Hytemp (thermoplastic elastomer) Butyl rubber with acetyl tributylcitrate Epoxy resin-diethylenetriamine Kraton (block copolymer of styrene and ethylene-butylene) Latex with bis-(2-ethylhexyl adipate) Nylon (polyamide) Polyester and styrene copolymer Poly(ethyl acrylate) with dibutyl phthalate Silicone rubber Viton (fluoroelastomer) Teflon (polytetrafluoroethylene) Epoxy ether Exon (polychlorotrifluoroethylene/vinylidine chloride) Hydroxy-terminated polybutadiene (polyurethane) Kel-F (polychlorotrifluoroethylene) Nylon (polyamide) Nylon and aluminium Nitro-fluoroalkyl epoxides Polyacrylate and paraffin Polyamide resin Polyisobutylene/Teflon (polytetrafluoroethylene) Polyester Polystyrene Teflon (polytetrafluoroethylene) Kraton (block copolymer of styrene and ethylene-butylene)... 

---