Japanese Institute for Standardization

DIS Draft international standard JIS Japanese Institute for Standards Organisation ... 

International Organization for Standardization Japan BioPlastics Association Japanese Institute for Standards Organisation Joint Technology Initiative... 

Another norm, which is very similar, is ASTM D5209 [10] originally published in 1992 and comparable to ISO 9439. The ASTM norm is now being modified to be in line with ISO 14852. Two European norms are identical to the ISO norms EN 29439 [11] to ISO 9439 and EN 14047 [12] to ISO 14852. The latter European norm however has expanded the field of application to packaging whereas ISO is limited in principle, to plastics only. In Japan the ISO 14852 method was transposed by the Japanese Institute for Standards (JIS) without changes into the JIS K 6951 [13]. 

Institut de Recherches de la Siderurgie, France International Organization for Standardization ISO Council Committee on Reference Materials International Union for Pure and Applied Chemistry Laboratory of the Government Chemist, UK, formerly NPL National Bureau of Standards, USA, now NIST National Committee for Clinical Laboratory Standards, USA National Institute for Biological Standards and Control, UK Japanese National Institute for Environmental Studies National Institute of Occup. Health, Oslo, Norway National Institute of Standards and Technology, USA, formerly NBS,... 

A number of specifications and codes of practice are followed throughout the world for rubber lining, the major ones being from the ASTM, the BS Specifications, the German Institute for Standardisation (DIN) and the Japanese Industrial Standards (JIS) which give exhaustive information on rubber lining procedures, testing methods and code of practice. 

Calibration standards of PTX2 and PTX2S A are available from National Research Institute, Canada (Halifax, Canada) [55], There is a standard toxin distribution project organized by the Japanese Government for domestic use [47], PTXl, PTX2, and PTX6 are available in Japan from Japan Food Research Laboratories (Tama, Japan). 

Materials (ASTM), European Committee for Standardization (CEN), German Institute of Standardization, Japanese Industrial Standards and the International Organization for Standardization (ISO). 

For testing plastics, a wide spectrum of national standards have been practiced worldwide— for instance, American Society for Testing and Materials (ASTM) standards in the United States, Deutsches Institut fiir Normung (DIN) in Germany British Standards Institution (BSI) standards in the United Kingdom, Association Fran aise de Normalisation (AFNOR) standards in France, and Japanese Industrial Standards (JIS) in Japan (Fig. 11.2). 

If the test procedure is to be used by other laboratories, either to qualify on the basis of a specification or simply to compare results among laboratories, then it is important that reproducibility of results be determined. This is accomplished through round-robin tests that are conducted among interested laboratories to develop standard test procedimes, such cis those that are developed by ASTM International, Comit6 European Normalization (CEN), International Organization for Standardization (ISO), Japanese Standards Association (JSA), Materials Technology Institute (MTI) of the Chemical Process Industries, and NACE International. 

Committee of the Russian Federation for Standardization, Metrology and Certification, Leninsky Prospekt 9, Moskva 117049, Russia Japanese Industrial Standards Institution... 

The governmental inspection of imported foods was taken by food sanitation inspectors at seaports and airports in Japan by a first screening test with a simple scintillation survey meter and also by a minute analysis of Ge detector at four major sea ports (Tokyo, Yokohama, Osaka, Kobe), one major airport (Narita) and in the National Institute of Hygienic Sciences, Tokyo. At the same time, trade companies were requested voluntarily to check imported foods for radioactive contamination under the above Japanese interim standard of 370 Bq/kg at the laboratories designated by the Ministry of Health and Welfare of Japan (Washima and Ohkubo, 1987). 

Based on Step 4 of the ICH Good Clinical Practice (GCP) guideline of May 1996, the Japanese Ministry of Health and Welfare (MHW) prepared an amendment to the previous GCP guideline and on 27 March 1997 this was issued as MHW Ordinance of the Standards for Good Clinical Practice . This new GCP became effective as of 1 April 1997 with some moratoria (preparation of standard operating procedures (SOP) at medical institutes, source data verification, etc.), and full implementation was from 1 April 1998. Unlike the previous GCP guidelines, the new GCP is based on the revised Pharmaceutical Affairs Law of June 1996, which requires... 

Most measurements on petroleum products are by industry-accepted methods that are established and certified by independent organizations. One of those is the American Society for Testing and Materials (ASTM), whose petroleum methods are identified as ASTM DXYZ. Other such organizations include the Institute of Petroleum (IP, now the Energy Institute) in the United Kingdom, and the Japanese Standards Association (JSA). 

Architectural Institute of Japan (AU) Guide for the Use of Concrete-Polymer Composites (1987) JASSs (Japanese Architectural Standard Spedficatiotls) Including the Polymer-Modified Mortars JASS 8 (Waterpr ing and Sealing) (1993) JASS 15 (Plastering Work) (1989) JASS 18 (Paint Work) (1989) JASS 23 (Spray Finishing) (1989)... 

American Concrete Institute (ACI), Detroit, Michigan, USA American Society for Testing and Materials (ASTM), Philadelphia, Pennsylvania, USA Materials Research Society (MRS), Pittsburgh, Pennsylvania, USA Japan Society of Civil Engineers (JCSE), Tokyo, Japan Japanese Standards Association, Tokyo, Japan Japan Cement Association, Tokyo, Japan International Academic Publishers, Beijing, China and Thomas Telford Services Ltd., London, UK. 

Deutsches Institut fiir Normung Japanese Industrial Standard Intern al Orgafiizatlon for Standarciz ion Intern Tonal Electrotechnical Commisaon... 

Railway Technical Research Institute (RTRI). 2007. Design Standards for Railway Structures and Commentary (Earth Structures). Tokyo Maruzen (in Japanese). 

Oblivious to institutional and professional sensitivities, the authorities continued incessantly to prepare servicemen and civilians for the Allied invasion which might involve or tri er the use of gas warfare. In May, Porton carried out large-scale chemical warfare exercises in conjunction with beach-head operations by service and civihan authorities at around the same time, scientists from Porton came to the conclusion that the use of mustard gas was likely to have a b potential in the subjugation of Japanese forces on the Pacific islands thousands of miles to the east. With millions of soldiers and civilians killed and injured, famihes and children displaced, buildings burnt, and entire cities destroyed, there was little appetite among senior Allied officials to uphold standards of medical ethics and international morality if the end of combat operations would be delayed as a result. 

---