Aromatic index

Salmone JC, Kunzler JF, Ozark RM et al. (2006) High refractive index aromatic-based sUoxane drfunctional macromonomers. US Patent 7,009,024... 

An interesting comparison between several aromaticity indices (harmonic oscillator model, nucleus-independent chemical shift, para-delocalization index, aromatic fluctuation index, multicenter indices, atoms-in-molecules theoretical indices and graph-theoretical indices) concluded that the most reliable ones are based on electron delocalization (08JCC1543). 

The nature of cyclical structures (e.g., ring condensation index, aromaticity, heteroatoms)... 

Specific Gravity Sulfur (wt%) Nitrogen (ppm) Ni + V (ppm) Cetane Index Aromatics (Wt%)... 

The combustion quality of aviation turbine fuel has traditionally been controlled in specifications by such tests as smoke point, smoke volatility index, aromatic content of luminometei number. Evidence is accumulating that a better control of the quality may be obtained by limiting the minimum hydrogen content of the fuel. 

As in the case of density or specific gravity, the refractive index, n, for hydrocarbons varies in relation to their chemical structures. The value of n follows the order n paraffins < n naphthenes < n aromatics and it increases with molecular weight. 

With the accumulation of results obtained from various and complex analyses of narrow cuts (Waterman method), correlations have been found f ctween refractive index, specific gravity and molecular weight on one hand, and percentages of paraffinic, naphthenic and aromatic carbon on the other. 

This usefulness of the correlation is twq-fpld first it provides information on the cetane indices that are not aViit le in the literature as in the cases of polynuclear aromatics and sulfur-containing aromatics, and second it helps provide an evaluation of the cetane index based on a few milligrams of sample, instead of the liter or so required for the motor method. 

Figure 5.13 shows that the luminometer index depends directly on the mono-aromatic and di-aromatic contents. For this reason, the specifications... 

Luminometer index for the combustion flame of a jet fuel as a function of its volumetric content in aromatics. 

Flash point, Cleveland Neutralization index Saybolt color Aromatics... 

This form of limited-conversion hydrocracking is a process that selectively prepares high quality residues for the special manufacture of base oils of high viscosity index or treating residues having low BMCl for the conversion of heavy fractions to ethylene, propylene, butadiene and aromatics. 

Kovats, E. and A. Wehrli (1959), Gas-chromatography characterization of organic compounds. III. Calculation of the retention indexes of aliphatic, alicyclic and aromatic compounds . Helv. Chim. Acta, Vol. 42, p. 2709. 

There are variations in representation of rings in different disciplines. The dye industry does not designate aromaticity or double bonds in rings. AH double bonds and aromaticity are shown in the Encyclopedia as a matter of course. For example, tetralin has an aromatic ring and a saturated ring and its stmcture appears in the Encyclopedia with its common name. Registry Number enclosed in brackets, and parenthetical CA index name, ie, tetralin [119-64-2] (1,2,3,4-tetrahydronaphthalene). With names and stmctural formulas, and especiaHy with CAS Registry Numbers, the aim is to help the reader have a concise means of substance identification. 

Alkylated aromatics have excellent low temperature fluidity and low pour points. The viscosity indexes are lower than most mineral oils. These materials are less volatile than comparably viscous mineral oils, and more stable to high temperatures, hydrolysis, and nuclear radiation. Oxidation stabihty depends strongly on the stmcture of the alkyl groups (10). However it is difficult to incorporate inhibitors and the lubrication properties of specific stmctures maybe poor. The alkylated aromatics also are compatible with mineral oils and systems designed for mineral oils (see Benzene Toulene Xylenes and ethylbenzene). ... 

Diesel Fuel. Eederal diesel specifications were changed to specify a maximum of 0.05% sulfur and a minimum cetane index of 40 or a maximum aromatics content of 35 vol % for on-road diesel. Eor off-road diesel, higher sulfur is allowed. CARB specifications require 0.05% sulfur on or off road and 10% aromatics maximum or passage of a qualification test. Process technologies chosen to meet these specifications include hydrotreating, hydrocracking, and aromatics saturation. 

Many attempts have been made to characterize the stabiUty of the colloidal state of asphalt at ordinary temperature on the basis of chemical analysis in generic groups. For example, a colloidal instabiUty index has been defined as the ratio of the sum of the amounts in asphaltenes and flocculants (saturated oils) to the sum of the amounts in peptizers (resins) and solvents (aromatic oils) (66) ... 

Aromaticity is the most important property of a carbon black feedstock. It is generally measured by the Bureau of Mines Correlation Index (BMCI) and is an indication of the carbon-to-hydrogen ratio. The sulfur content is limited to reduce corrosion, loss of yield, and sulfur in the product. It may be limited in certain locations for environmental reasons. The boiling range must be low enough so that it will be completely volatilized under furnace time—temperature conditions. Alkane insolubles or asphaltenes must be kept below critical levels in order to maintain product quaUty. Excessive asphaltene content results in a loss of reinforcement and poor treadwear in tire appHcations. 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

Theoretical and structural studies have been briefly reviewed as late as 1979 (79AHC(25)147) (discussed were the aromaticity, basicity, thermodynamic properties, molecular dimensions and tautomeric properties ) and also in the early 1960s (63ahC(2)365, 62hC(17)1, p. 117). Significant new data have not been added but refinements in the data have been recorded. Tables on electron density, density, refractive indexes, molar refractivity, surface data and dissociation constants of isoxazole and its derivatives have been compiled (62HC(17)l,p. 177). Short reviews on all aspects of the physical properties as applied to isoxazoles have appeared in the series Physical Methods in Heterocyclic Chemistry (1963-1976, vols. 1-6). 

Values for hydrocarbons other than alkynes and alkadienes can be predicted by the method of Suzuki et al. The best model includes the descriptors T, P, the parachor, the molecular surface area (which can be approximated by the van der Waals area), and the zero-order connectivity index. Excluding alkynes and alkadienes, a studv for 58 alkanes, aromatics, and cycloalkanes showed an average deviation from experimental values of about 30 K. 

On the basis of data obtained the possibility of substrates distribution and their D-values prediction using the regressions which consider the hydrophobicity and stmcture of amines was investigated. The hydrophobicity of amines was estimated by the distribution coefficient value in the water-octanole system (Ig P). The molecular structure of aromatic amines was characterized by the first-order molecular connectivity indexes ( x)- H was shown the independent and cooperative influence of the Ig P and parameters of amines on their distribution. Evidently, this fact demonstrates the host-guest phenomenon which is inherent to the organized media. The obtained in the research data were used for optimization of the conditions of micellar-extraction preconcentrating of metal ions with amines into the NS-rich phase with the following determination by atomic-absorption method. 

As with the polysulphones, the deactivated aromatic nature of the polymer leads to a high degree of oxidative stability, with an indicated UL Temperature Index in excess of 250°C for PEEKK. The only other melt-processable polymers in the same league are poly(phenylene sulphides) and certain liquid crystal polyesters (see Chapter 25). 

---