Aromatics deactivated

Whereas the above reactions are appHcable to activated aromatics, deactivated aromatics can be formylated by reaction with hexamethylenetetramine in strong acids such as 75% polyphosphoric acid, methanesulfonic acid, or trifluoroacetic acid to give saUcylaldehyde derivatives (117). Formyl fluoride (HCOF) has also been used as formyl a ting agent in the Friedel-Crafts reaction of aromatics (118). Formyl fluoride [1493-02-3] in the presence of BF was found to be an efficient electrophilic formyl a ting agent, giving 53% para-, 43% ortho- and 3.5% meta-tolualdehydes upon formylation of toluene (110). 

Antioxidant and deactivation additives substituted phenols, dithiophosphates, dithiocarbamates, alkylated aromatic amines. 

The lack of reactivity of acyl cations such as the acetyl cation with deactivated aromatics or saturated hydrocarbons is therefore not un-... 

The finding that highly deactivated aromatics do not react with N02 salts is in accord with the finding that their greatly diminished TT-donor ability no longer snffices to polarize NOi. Similarly, (j-donor hydrocarbons such as methane (CH4) are not able to affect such polarization. Instead, the linear nitronium ion is activated by the superacid. Despite the fact that is a small, triatomic cation, the 11011-... 

We found a way to overcome charge-charge repulsion when activating the nitronium ion when Tewis acids were used instead of strong Bronsted acids. The Friedel-Crafts nitration of deactivated aromatics and some aliphatic hydrocarbons was efficiently carried out with the NO2CI/3AICI3 system. In this case, the nitronium ion is coordinated to AICI3. 

There are certain limitations to the usefulness of nitration in aqueous sulphuric acid. Because of the behaviour of the rate profile for benzene, comparisons should strictly be made below 68% sulphuric acid ( 2.5 fig. 2.5) rates relative to benzene vary in the range 68-80% sulphuric acid, and at the higher end of this range are not entirely measures of relative reactivity. For deactivated compounds this limitation is not very important, but for activated compounds it is linked with a fundamental limit to the significance of the concept of aromatic reactivity as already discussed ( 2.5), nitration in sulphuric acid cannot differentiate amongst compounds not less than about 38 times more reactive than benzene. At this point differentiation disappears because reactions occur at the encounter rate. 

Why IS there such a marked difference between methyl and trifluoromethyl substituents m their influence on electrophilic aromatic substitution s Methyl is activating and ortho para directing trifluoromethyl is deactivating and meta directing The first point to remember is that the regioselectivity of substitution is set once the cyclohexadienyl cation intermediate is formed If we can explain why... 

Table 12 2 summarizes orientation and rate effects m electrophilic aromatic sub stitution reactions for a variety of frequently encountered substituents It is arranged m order of decreasing activating power the most strongly activating substituents are at the top the most strongly deactivating substituents are at the bottom The mam features of the table can be summarized as follows... 

As Table 12 2 indicates a variety of substituent types are meta directing and strongly deactivating We have already discussed one of these the trifluoromethyl group Several of the others have a carbonyl group attached directly to the aromatic ring... 

Substituent Effects in Electrophilic Aromatic Substitution Strongly Deactivating Substituents... 

Returning to Table 12 2 notice that halogen substituents direct an incoming electrophile to the ortho and para positions but deactivate the ring toward substitution Nitration of chlorobenzene is a typical example of electrophilic aromatic substitution m a halobenzene... 

Aluminum chloride is a stronger Lewis acid than iron(lll) bromide and has been used as a catalyst in electrophilic bromination when as in the example shown the aromatic ring bears a strongly deactivating substituent... 

Neither Friedel-Crafts acylation nor alkylation reactions can be earned out on mtroben zene The presence of a strongly deactivating substituent such as a nitro group on an aromatic ring so depresses its reactivity that Friedel-Crafts reactions do not take place Nitrobenzene is so unreactive that it is sometimes used as a solvent m Friedel-Crafts reactions The practical limit for Friedel-Crafts alkylation and acylation reactions is effectively a monohalobenzene An aromatic ring more deactivated than a mono halobenzene cannot be alkylated or acylated under Friedel-Crafts conditions... 

Electrophilic aromatic substitution (Section 12 14) Halo gen substituents are slightly deactivating and ortho para directing Br... 

Deactivating substituent (Sections 12 11 and 12 13) A group that when present in place of hydrogen causes a particular reaction to occur more slowly The term is most often ap plied to the effect of substituents on the rate of electrophilic aromatic substitution... 

Dinitrochlorobenzene can be manufactured by either dinitration of chlorobenzene in filming sulfuric acid or nitration ofy -nitrochlorobenzene with mixed acids. Further substitution on the aromatic ring is difficult because of the deactivating effect of the chlorine atom, but the chlorine is very reactive and is displaced even more readily than in the mononitrochlorobenzenes. 

A tertiary carbonium ion is more stable than a secondary carbonium ion, which is in turn more stable than a primary carbonium ion. Therefore, the alkylation of ben2ene with isobutylene is much easier than is alkylation with ethylene. The reactivity of substituted aromatics for electrophilic substitution is affected by the inductive and resonance effects of a substituent. An electron-donating group, such as the hydroxyl and methyl groups, activates the alkylation and an electron-withdrawing group, such as chloride, deactivates it. 

C, 0.356—1.069 m H2/L (2000—6000 fU/bbl) of Hquid feed, and a space velocity (wt feed per wt catalyst) of 1—5 h. Operation of reformers at low pressure, high temperature, and low hydrogen recycle rates favors the kinetics and the thermodynamics for aromatics production and reduces operating costs. However, all three of these factors, which tend to increase coking, increase the deactivation rate of the catalyst therefore, operating conditions are a compromise. More detailed treatment of the catalysis and chemistry of catalytic reforming is available (33—35). Typical reformate compositions are shown in Table 6. 

Catalysts in this service can deactivate by several different mechanisms, but deactivation is ordinarily and primarily the result of deposition of carbonaceous materials onto the catalyst surface during hydrocarbon charge-stock processing at elevated temperature. This deposit of highly dehydrogenated polymers or polynuclear-condensed ring aromatics is called coke. The deposition of coke on the catalyst results in substantial deterioration in catalyst performance. The catalyst activity, or its abiUty to convert reactants, is adversely affected by this coke deposition, and the catalyst is referred to as spent. The coke deposits on spent reforming catalyst may exceed 20 wt %. 

A diazonium salt is a weak electrophile, and thus reacts only with highly electron-rich species such as amino and hydroxy compounds. Even hydroxy compounds must be ionized for reaction to occur. Consequendy, hydroxy compounds such as phenols and naphthols are coupled in an alkaline medium (pH > of phenol or naphthol typically pH 7—11), whereas aromatic amines such as N,N diaLkylamines are coupled in a slightly acid medium, typically pH 1—5. This provides optimum stabiUty for the dia2onium salt (stable in acid) without deactivating the nucleophile (protonation of the amine). 

---