Have Confidence

People love to be associated with, do business with, and to participate with somebody that has confidence. Your confidence will inspire other people to be confident and encourage them to participate in safety. 

---

Well, that s about as rounded an education on Leuckart reactions as Strike can give. Strike feels that after reading all of those similar, repetitious steps, one can start to get a good feel for where a product is at any given moment. Stuff like what happens to MDA when it s mixed with acid or base, or what happens to ketones (P2P) under the same circumstances. One can see now that it is possible to not only isolate safrole and P2Ps chemically but that the same can be true for the final MDA or meth freebase oil. Repeated washings with acid or base and solvent can effectively clean up a compound to an almost presentable state without the use of vacuum distillation, it can happen, one only needs have confidence in the chemistry. 

Confidence The accuracy of the conclusions drawn from any unit test depends upon the accuracy of the laboratory analyses. Plant-performance analysts must have confidence in these analyses including understanding the methodology and the limitations. This confidence is established through discussion, analyses of known mixtures, and analysis of past laboratory results. This confidence is established during the preparation stage. 

Manufacturers need to have confidence that a continual uninterrupted supply of raw material can be sustained throughout the life cycle of a product. It is of equal importance that the feedstock should not be restricted by geographical and climatic conditions or that yield does not dramatically vary when harvested in different locations and at a particular time of the year. The key to an increased usage of natural products by industry is in the control of the above variables so that the end performance of the product remains consistent. 

An indicative limit value is a more common type of limit that reflects expert evaluation based on scientific data where it is possible to identify the highest level of exposure along with the corresponding reference time period for which one can have confidence that there will be no adverse effects on health. For any chemical agent for which an indicative occupational exposure limit value is established at the community level, member states shall establish a national occupational exposure limit value, taking into account the community limit value and determining its nature in accordance with national legislation and practice. 

Knowing when the instrument s accuracy was last checked so that you can have confidence in its results - calibration records and labels fulfill this need. 

Do reduce the frequency of audits if you have confidence in a particular area. 

In addition to understanding the PSM system and its implementation, in-hou e trainers need skills development training to enable tiiem to fulfill their roles effectively. Everyone has had the dismal experience of listening to speakers or teachers whose command of their subject may be excellent, but who are incapable of conveying it in a useful, much less interesting, manner. To help avoid this, be selective in recruiting in-house trainer candidates the best people for this task have confidence, enthusiasm, and an ability to communicate well. 

The responsible engineer does not have confidence in some of the techniques. 

This generalization is of great value. It is based upon exactly the type of experiment you have performed. We have confidence in the rule because this type of experiment has been conducted successfully on hundreds of thousands of substances. The melting behavior is one of the most commonly used methods of characterizing a substance. It leads us to wonder if every solid can be converted to a liquid if the temperature is raised sufficiently. Further, it leads us to wonder... 

Thus we see that the experimental rate laws for this reaction and its reverse lead to the equilibrium law. In every reaction that has been sufficiently studied, this same result is obtained. We are led to have confidence in the... 

Previous chapters have discussed how isothermal or adiabatic reactors can be scaled up. Nonisothermal reactors are more difficult. They can be scaled by maintaining the same tube diameter or by the modeling approach. The challenge is to increase tube diameter upon scaleup. This is rarely possible and when it is possible, scaleup must be based on the modeling approach. If the predictions are satisfactory, and if you have confidence in the model, proceed with scaleup. 

Factors with regression coefficients having confidence coefficients > 90% None ANOVA F-ratIo 13.65... 

The methods It is advised that, prior to the certification measurements, the participants discuss their methods so that all participants have confidence in each others methods and there is a good level of agreement between laboratories. As it is preferred to certify on the basis of the agreement between different methods applied in different laboratories, a proposal should indude, where relevant and possible, a group of laboratories offering a range of widely different measurement methods. Each laboratory should use well established method(s), with which it can demonstrate adequate performance in terms of trueness and in terms of reproducibility. 

Once you have confidence that your method is adequate from the preliminary work in the method tryout, you are ready to begin the method validation. The method validation provides additional data on accuracy and precision, and confirms that there are no problems due to interference. Method validation must be completed before beginning the analysis of the treated samples from the field. The validation should test the detector s response over the expected range of concentrations from the field. 

Once your problem takes on a 13 C dimension, you are of course, obligated to examine the 13 C data with the same level of dispassionate scrutiny that you apply to the proton data. Chemical shifts cannot be fudged and unexpected peaks cannot be glossed over. You have to be able to account for everything you see to have confidence in your product. 

If the samples are to be brought back to a shore laboratory for analysis, contamination during analysis is more easily controlled. The analyst on shore must have confidence in the people taking the samples with the pressure on berth space and wire time on board ship, too often the samples are taken on a while you re out there, take some for me basis. Again, ideally, the analyst should at least oversee every part of the process, from the cleaning of the sampler to the final calculation of the amounts present. His confidence in the accuracy of the final calculation must decrease as he departs from the ideal arrangement. 

Needs for the Future. One significant need in the area of ocular alternatives is for the validation of current in vitro assays. The key point is that users of the assay(s) need to have confidence in their ability to interpret and reliably use the data generated. This confidence level can only be achieved by parallel testing in one s own laboratory with compounds similar to those likely to be evaluated as unknowns. The validation process will be a long, somewhat tedious project, but will be necessary before in vitro alternatives can be used responsibly... 

Before applying any model it is essential to have confidence that the input data is valid. There are repeated warnings in the literature of data being invalid because it is obtained at such accelerated levels of the degradation agent that reactions occur which are not seen at lower levels. 

By following the above the FSA customers will have confidence that the systems are in place in contractors with respect to analytical control and that they are being respected. It is appreciated that not all aspects outlined in Parts A, B and C will be appropriate for every contract but all should be at least considered as to their appropriateness. 

From these selected references and others, we have confidence that the FDA and USP accept automation in general, and automated dissolution in particular. The references confirm the importance of maintaining the same basic chemistry and adhering to compendium design as closely as possible. This is not only a regulatory consideration but also one of practicality. It is extremely important that methods can be successfully transferred to other sites and apparatus (automated or otherwise). With this information we may proceed with our functional design of an automated dissolution system. 

Polymer Structure. The reaction studied here is summarized in Equation 21. As shown in the experimental section, it is possible to prepare these polymers at various degrees of substitution. As the degree of substitution increases, the ratios of the infrared C=0/0H absorption peaks and the phenyl/aliphatic C-H absorption peaks increase in a linear manner (Table I). (It would be possible to determine the degree of substitution from such calibrated curves.) At the same time, the intensity of the OH band in the NMR spectra diminishes while a strong set of peaks due to the phenyl group forms. Elemental nitrogen analysis values for the modified polymers agree closely with the calculated values. In addition, the infrared spectra show the necessary carbamate N-H bands. These factors enable us to have confidence that the polymer structure is as shown in Equation 21. 

Personality factors also play a role but are sometimes overlooked. Clients turn to lawyers to solve or avert problems they face, and they want to have confidence in their attorneys. An assertive, confident lawyer inspires that trust. Much of the incentive for chemists to go to the trouble and expense of acquiring a law degree arises from the desire for the increased personal contact that is offered by a career in law over many of the traditional careers in chemistry. Thus, personality is an important attribute of a good and successful lawyer. 

The solvent-mediated transformation of o -L-glutamic acid to the S-form was quantitatively monitored over time at a series of temperatures [248]. The calibration model was built using dry physical mixtures of the forms, but still successfully predicted composition in suspension samples. Cornel et al. monitored the solute concentration and the solvent-mediated solid-state transformation of L-glutamic acid simultaneously [249]. However, the authors note that multivariate analysis was required to achieve this. Additionally, they caution that it was necessary to experimentally evaluate the effect of solid composition, suspension density, solute concentration, particle size and distribution, particle shape, and temperature on the Raman spectra during calibration in order to have confidence in the quantitative results. This can be a substantial experi-... 

To have confidence in a classification, nearly all of the K nearest neighbors should be firom the same class. 

---