Fourier transform infrared resonance spectrometry

Spectroscopy, 490. See also 13C NMR spectroscopy FT Raman spectroscopy Fourier transform infrared (FTIR) spectrometry H NMR spectroscopy Infrared (IR) spectroscopy Nuclear magnetic resonance (NMR) spectroscopy Positron annihilation lifetime spectroscopy (PALS) Positron annihilation spectroscopy (PAS) Raman spectroscopy Small-angle x-ray spectroscopy (SAXS) Ultraviolet spectroscopy Wide-angle x-ray spectroscopy (WAXS)... 

In the author s opinion, the better approach to experimentally study the morphology of the silica surface is with the help of physical adsorption (see Chapter 6). Then, with the obtained, adsorption data, some well-defined parameters can be calculated, such as surface area, pore volume, and pore size distribution. This line of attack (see Chapter 4) should be complemented with a study of the morphology of these materials by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning probe microscopy (SPM), or atomic force microscopy (AFM), and the characterization of their molecular and supramolecular structure by Fourier transform infrared (FTIR) spectrometry, nuclear magnetic resonance (NMR) spectrometry, thermal methods, and possibly with other methodologies. 

Field desorption mass spectrometry [1606], C nuclear magnetic resonance, and fourier-transform infrared spectroscopy [1337] have been used to characterize oil field chemicals, among them, scale inhibitors. Ion... 

Supercritical fluid chromatography Thin-layer chromatography Atomic absorption spectroscopy Nuclear magnetic resonance spectroscopy Mass spectrometry Fourier transform infrared spectrometry... 

With recent developments in analytical instrumentation these criteria are being increasingly fulfilled by physicochemical spectroscopic approaches, often referred to as whole-organism fingerprinting methods.910 Such methods involve the concurrent measurement of large numbers of spectral characters that together reflect the overall cell composition. Examples of the most popular methods used in the 20th century include pyrolysis mass spectrometry (PyMS),11,12 Fourier transform-infrared spectrometry (FT-IR), and UV resonance Raman spectroscopy.16,17 The PyMS technique... 

Several modem analytical instruments are powerful tools for the characterisation of end groups. Molecular spectroscopic techniques are commonly employed for this purpose. Nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy and mass spectrometry (MS), often in combination, can be used to elucidate the end group structures for many polymer systems more traditional chemical methods, such as titration, are still in wide use, but employed more for specific applications, for example, determining acid end group levels. Nowadays, NMR spectroscopy is usually the first technique employed, providing the polymer system is soluble in organic solvents, as quantification of the levels of... 

NMR spectrum. Fourier transform nuclear magnetic resonance (FTNMR) instruments, which are similar in principle to Fourier transform infrared spectrometry (FTIR) instruments, are popular today. We will briefly describe these instruments later in this section. 

Table 5.2 Summary of selected analytical methods for molecular environmental geochemistry. AAS Atomic absorption spectroscopy AFM Atomic force microscopy (also known as SFM) CT Computerized tomography EDS Energy dispersive spectrometry. EELS Electron energy loss spectroscopy EM Electron microscopy EPR Electron paramagnetic resonance (also known as ESR) ESR Electron spin resonance (also known as EPR) EXAFS Extended X-ray absorption fine structure FUR Fourier transform infrared FIR-TEM Fligh-resolution transmission electron microscopy ICP-AES Inductively-coupled plasma atomic emission spectrometry ICP-MS Inductively-coupled plasma mass spectrometry. Reproduced by permission of American Geophysical Union. O Day PA (1999) Molecular environmental geochemistry. Rev Geophysics 37 249-274. Copyright 1999 American Geophysical Union...

Monitoring reaction progress throughout a multistep synthesis is a relatively difficult task.22 Typical methods used for solution-phase synthesis, including thin-layer chromatography (TLC), GC, and most types of mass spectrometry (MS), are less informative for solid-phase methods. However, Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) are particularly useful in solid-phase strategies. 

The main spectrometric identification techniques employed are gas chromatography/mass spectrometry (GC/MS) (13), liquid chromatography/tandem mass spectrometry (LC/MS(/MS)) (14), nuclear magnetic resonance (NMR) (11), and/or gas chromatography/Fourier transform infrared spectroscopy (GC/FL1R) (15). Each of these spectrometric techniques provides a spectrum that is characteristic of a chemical. MS and NMR spectra provide (detailed) structural information (like a fingerprint ), whereas an FUR spectrum provides information on functional groups. 

Infrared spectroscopy (IR) is one of the oldest instrumental analytical techniques but its value in structural analysis has decreased with the rise of nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS). Compared to the traditional dispersive IR techniques, Fourier transform infrared spectroscopy (FTIR) offers more sampling techniques. 

Improvements in column technology, detector sensitivity and the development of new detection systems, have made possible the routine separation of picomole quantities of nucleic acid components in complex physiological matrices. The very sensitivity of most LC systems, however, which is invaluable in the analysis of biological samples, is often the limiting factor because of inadequate or ambiguous identification methods. Although tremendous advances have been made in the on-line combination of HPLC with spectroscopic techniques [e.g., mass spectrometry, Fourier transform infrared (FT/IR), nuclear magnetic resonance], their application has not become routine in most biochemical and biomedical laboratories. 

CD = circular dichroism DCPIP = 2, 6-dichloro-phenolindophenol EPR = electron paramagnetic resonance ESI-MS = electrospray ionization mass spectrometry FTIR = Fourier transform infrared FRET = fluorescence resonant energy transfer 5 -GMP = guanosine-5 -monopho-sphate L-Met = L-methionine NAAD = nicotinic acid adenine dinucleotide MS = mass spectrometry NMR = nuclear magnetic resonance PEEK = polyetheretherketone SF = stopped-flow SVD = singular value decomposition tu = thiourea. 

Methods in the analysis of drug impurities (e.g., ultraviolet, UV Fourier transform infrared, FT-IR nuclear magnetic resonance, NMR mass spectrometry, MS) are used to separate, identify, and quantify impurities, as well as establish their structure. Currently the most efficient methods seem to be combined techniques such as GC-MS, LC-MS, liquid chromatography-diode-array detection-mass spectrometry (LC-DAD-MS), LC-NMR, LC-DAD-NMR-MS, etc. [18-20]. 

Altered surfaces have been inferred from solution chemistry measurements (e.g., Chou and Wollast, 1984, 1985) and from spectroscopic measurements of altered surfaces, using such techniques as secondary ion mass spectrometry (for altered layers that are several tens of nm thick (e.g., Schweda et al, 1997), Auger electron spectroscopy (layers <10 nm thick (e.g., Hochella, 1988), XPS (layers <10 nm thick (e.g., Hochella, 1988 Muir et al, 1990), transmission electron microscopy (TEM, e.g., Casey et al, 1989b), Raman spectroscopy (e.g.. Gout et al, 1997), Fourier transform infrared spectroscopy (e.g., Hamilton et al, 2001), in situ high-resolution X-ray reflectivity (Farquhar et al, 1999b Fenter et al, 2003), nuclear magnetic resonance (Tsomaia et al, 2003), and other spectroscopies (e.g., Hellmann et al, 1997). 

The analysis of such systems is often complex. One solution to this problem is the use of preparative SEC, to provide fractions for subsequent analysis by off-line techniques such as mass spectrometry, Fourier transform infrared and nuclear magnetic resonance. This technique can also be used to isolate pure polymer fractions for subsequent use in SEC calibration. 

One of the attractions of SFC is that it can use both GC- and LC-like detectors, including the almost universal flame ionization detector (FID) for nonvolatile and volatile analytes after separation on either capillary or packed columns. Selective responses could be also obtained from a number of detectors as NPD, ECD, FPD, ultraviolet, Fourier transform infrared, nuclear magnetic resonance, and mass spectrometry. 

Fourier transform infrared spectroscopy nuclear meagnetic resonance Electron Spin Resonance Pyrolysis-gas chromatography Pyrolysis-mass spectrometry Pyrolysis-Fourier transform infrared spectroscopy pH titration Binding Studies... 

---