Final safety analysis report

Final Safety Analysis Report (including all supplements, appendixes, and NRC questions and responses). 

FSAR - Final Safety Analysis Report (Chapter 15 is the accident analysis section in the FSAR standard format). 

Allied-General Nuclear Services Final Safety Analysis Report, Barnwell Nuclear Fuel Plant Separations Facility, Oct. 1973. 

G3. General Electric Company Final Safety Analysis Report for Midwest Fuel Reprocessing Plant, Section 2 of Amendment 35 of Docket 50-268, Dec. 20, 1973. 

The techniques used to complete PHAs inelude What-iF analyses. Explosive Safety Checklist Analyses, General Industry Checklist analyses and FMEA analyses. The information from Preliminary Hazards Analyses, previous Final Safety Analysis Report analyses. Fire Hazards Analyses, and other... 

The project specific regulatory requirements include also specification of documentation that is to be submitted for licensing evaluation in addition to the amendment to the existing plant Final Safety Analysis Report, sueh as a series of Topical Reports addressing specific safety issues. 

For these items, the procedures and criteria used for seismic analysis are comparable to those committed to in recent LWR Final Safety Analysis Reports (FSARs). 

Currently the analysis for LPS has been performed only for a small number of cases. However, because of their safety significance, there is a need to perform these analyses for inclusion in final safety analysis reports, for development of emergency operating procedures, and for further development of technical specifications. Due to their potential impact, LPS analyses need to be carried out with the same care as those for full power conditions. 

AR450 1.181 Content of the updated final safety analysis report in accordance with 10 CFR 50.71(e)... 

Similar to the Final Safety Analysis Report in the U.S., a frmdamental feature of the British regulatory system is the requirement for each licensee to demonstrate the safety of its proposed operation in a document known as the safety case. The Nil also enforces safety and health regulations related to non-nuclear hazards at licensed sites. This role is perhaps comparable with those of the U.S. Environmental Protection Agency and state safety and health authorities. The relationship between the U.K. licensees and the safety authorities is generally less antagonistic than that found in the U.S. The majority of discrepancies found by Nil inspectors are addressed at the individual... 

Unlike the U.S. Final Safety Analysis Report, which is a single safety analysis document that includes both hardware and organizational (personnel) descriptions, the British safety case is a collection of documents with a hierarchical structure. The SMP is one element of the overall safety case. When a change takes place, neither the safety case nor the SMP are rewritten per se. Rather, new documents are issued describing the change. They become part of the current safety case, much as U.S. licensees maintain a collection of commitments as part of their current licensing basis. 

U.S. Nuclear Regulatory Commission, 1991, Fort St. Vrain Final Safety Analysis Report, Rev. 9, Washington, D C., July 22. 

Final safety analysis report for the Experimental Beryllium Oxide Reactor. USAEC Rept. GA-5000, General Atomic, November 30, 1964. 

The applicant should submit an "Application for Initial Fuel Loading of Nuclear Power Plant" together with the "Final Safety Analysis Report" to the NNSA for an "Instrument of Ratification for the Initial Fuel Loading". 

As part of an effort to develop a final safety analysis report of the Portsmouth Gaseous Diffusion Plant, operated by Goodyear Atomic Corporation, criticality safety studies of the high-assay portion of the cascade were conducted. An event of particular interest to the safety analysis, which occurred several years ago, is described and analyzed herein. 

Final Safety Analysis Report, W. H. Zimmer Nuclear Power Plant, Cincinnati Gas and Electric Co. (1975). 

Final Safety Analysis Report for the NUHOMS HD Horizontal Modular Storage System for Irradiated Nuclear Fuel, Revision 0, USNRC Docket No. 72-1030. 

After the construction permit is issued, the applicant must, if it did not as part of the original application, submit a final safety analysis report (FSAR) to support its application for an OL. The FSAR describes the final design of the plant and its operating and emergency procedures. The NRC prepares a final SER for the OL, and also the ACRS makes an independent evaluation and presents its findings and recommendations to the NRC. 

EOPs should be consistent with the design basis of the plant. EOPs may impact the final safety analysis report (FSAR), limits and conditions/ technical specifications and other safety documents, since the scope of EOPs extends from expected plant transients to BDBAs ... 

The last part of Step 3 was given on the way for licensing in May 1996. The applying documents like final safety analysis report, operating manual for thirty year operations of the safe enclosed plant and the like were checked by the experts. The license was granted on May 21,1997. 

The licensee s submittal for any proposed modifications to emergency ac sources, battery capacity, condensate inventory, compressed air capacity, ventilation systems, containment isolation valves, and primaiy coolant make-up capability is reviewed. The information available in the Final Safety Analysis Report is also reviewed. 

---