Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fiber-reinforced thermoset

Ohsawa, T., Nakayama, A., Miwa, M. and Hasegawa, A. (1978). Temperature dependence of critical fiber length for glass fiber-reinforced thermosetting resins. J. Appl. Polym. Sci. 22, 3203-3212. [Pg.90]

Crasto. A.S. and Kim, R.Y. (1993). On the determination of residual stresses in fiber-reinforced thermoset composites. J. Reinforced Plast. Composites. 12, 545-558. [Pg.321]

Unlike ductile metals, composite laminates containing fiber-reinforced thermosetting polymers do not exhibit gross ductile yielding. However, they do not behave as classic brittle materials, either. Under a static tensile load, many of these laminates show nonlinear characteristics attributed to sequential ply failures. One of the difficulties, then, in designing with laminar composites is to determine whether the failure of the first ply constitutes material failure, termed first-ply failure (FPF), or if ultimate failure of the composite constitutes failure. In many laminar composites, ultimate failure occurs soon after first ply failure, so that an FPF design approach is justified, as illustrated for two common laminar composites in Table 8.9 (see Section 5.4.3 for information on the notations used for laminar composites). In fact, the FPF approach is used for many aerospace and aircraft applications. [Pg.835]

Bonding Adhesives for Design of Structural Joints D 5677 Specification for Fiberglass (Glass Fiber Reinforced Thermosetting Resin)... [Pg.515]

TABLE 15.20 Topical Properties of Glass-Fiber-Reinforced Thermoset Polyesters... [Pg.660]

Fiiament Wound Giass Fiber Reinforced Thermoset Resin Chemical Resistant Tanks (ASTM D-3299-81)... [Pg.118]

Lithopone. [Sachtleben Oiemie GmbH] Zinc sulflde/barium sulfate white pigment fnr thermosets, glass fiber-reinforced thermosets arid thermoplastics, paper applies. [Pg.212]

Glass fiber reinforced thermosets good chemical resistance, workability, and... [Pg.227]

FF furan-formaldehyde FRTS fiber-reinforced thermoset... [Pg.595]

Glass Fiber-Reinforced Thermosetting Resins Hand Laminating... [Pg.239]

Thielemans, W. and Wool, R.P. (2004) Butyrated kraft lignin as compatibilizing agent for natural fiber reinforced thermoset composites. Composites Part A Applied Science and Manufacturing, 35,327-338. Satheesh Kumar, M.N., Mohanty, A.K., Erickson, L. and Misra, M. (2009) Lignin and its applications with polymers. Journal of Biobased Materials and Bioenergy, 3, 1-24. [Pg.114]

Damage in Fiber Reinforced Thermosetting Polymer Composite Structures... [Pg.3]

Fiber reinforced thermosetting polymer composites have been used in the form of laminate, sandwich, grid stiffened, stitched, Z-pinned, three-dimensional (3-D) woven fabric, and hybrid structures. In addition to carrying the designed static/dynamic loads, most composite stmcmres experience some kind of low or high velocity impact incidents during their life cycle. A low velocity impact is not uncommon. For example, dropping a tool on to a composite stmcmre... [Pg.3]

The well known Tsai-Halpin equation [1] describes the dependence of the modulus of a composite on that of the basis materials, the volume fraction of the fibers and their aspect ratio. In these composites the fibers carry the load and the matrix distributes it. Fiber reinforced thermosets have a wide range of technical applications and play an important role in self-supporting, low-weight constructions. [Pg.256]

Body Panels Plastics can help considerably reduce the mass of body panels while providing better durability, damage resistance, and corrosion resistance. Their first application in body panels was in 1953 [1]. General Motors introduced the Corvette with a fiber-reinforced thermoset plastic body (see Pig. 17.4). At almost the same time, Kaiser introduced a reinforced-plastic body on a sports car. Since then polymers have been used for fenders, hoods, trunk lids, roofs, doors, quarter panels, and lift gates. [Pg.737]

Unsaturated polyester-based thermosets account for >70 % of the total global volume of all the glass fiber-reinforced thermosetting composites currently used (Atkins 1978 Majumdar 2008). [Pg.1863]

Piggott MR, Ko M et al (1993) Aligned short-fiber reinforced thermosets experiments and analysis lend little support for established theory. Compos Sci Technol 48 291-299... [Pg.420]

See other pages where Fiber-reinforced thermoset is mentioned: [Pg.85]    [Pg.802]    [Pg.604]    [Pg.651]    [Pg.1053]    [Pg.515]    [Pg.276]    [Pg.295]    [Pg.314]    [Pg.12]    [Pg.13]    [Pg.304]    [Pg.3031]    [Pg.85]    [Pg.300]    [Pg.176]    [Pg.354]    [Pg.468]    [Pg.500]    [Pg.1097]    [Pg.2]    [Pg.3]    [Pg.3]    [Pg.330]    [Pg.356]    [Pg.41]    [Pg.345]   


SEARCH



Reinforced thermoset

© 2024 chempedia.info