Fatty glycerol

Fats are hydrolysed to glycerol and fatty acids by boiling with acids and alkalis, by superheated steam and by the action of lipases. If alkalis are used for hydrolysis, the fatty acids combine with the alkalis to form soaps. Alkaline hydrolysis is therefore sometimes called saponification. 

The term fat is applied to solid esters of fatty acids with glycerol (glycerides) if the fat is liquid at the ordinary temperature, it is conventionally called a fatty oil, vegetable oil or animal oil. The acids which occur most abundantly are palmitic ticid CH3(CHj),4COOH, stearic acid CH3(CH2)isCOOH and oleic acid CH3(CH2),CH=CH(CH2),C00H. Upon hydrolysis, fats yield glycerol and the alkali salts of these acids (soaps) ... 

Fats and oils are naturally occurring mixtures of glycerol tnesters Fats are mixtures that are solids at room temperature oils are liquids The long chain carboxylic acids obtained from fats and oils by hydrolysis are known as fatty acids... 

Acetyl coenzyme A is the biosynthetic precursor to the fatty acids, which most often occur naturally as esters Fats and oils are glycerol esters of long chain carboxylic acids Typically these chains are unbranched and contain even numbers of carbon atoms... 

Fats and oils (Section 26 2) Tnesters of glycerol Fats are solids at room temperature oils are liquids Fatty acid (Section 26 2) Carboxylic acids obtained by hydro lysis of fats and oils Fatty acids typically have unbranched chains and contain an even number of carbon atoms in the range of 12-20 carbons They may include one or more double bonds... 

Triacylglycerol (Section 26 2) A derivative of glycerol (12 3 propanetnol) m which the three oxygens bear acyl groups denved from fatty acids... 

Animal fats and vegetable oils are triacylglycerols, or triesters, formed from the reaction of glycerol (1,2, 3-propanetriol) with three long-chain fatty acids. One of the methods used to characterize a fat or an oil is a determination of its saponification number. When treated with boiling aqueous KOH, an ester is saponified into the parent alcohol and fatty acids (as carboxylate ions). The saponification number is the number of milligrams of KOH required to saponify 1.000 g of the fat or oil. In a typical analysis, a 2.085-g sample of butter is added to 25.00 ml of 0.5131 M KOH. After saponification is complete, the excess KOH is back titrated with 10.26 ml of0.5000 M HCl. What is the saponification number for this sample of butter ... 

Eats and oils from a number of animal and vegetable sources are the feedstocks for the manufacture of natural higher alcohols. These materials consist of triglycerides glycerol esterified with three moles of a fatty acid. The alcohol is manufactured by reduction of the fatty acid functional group. A small amount of natural alcohol is also obtained commercially by saponification of natural wax esters of the higher alcohols, such as wool grease. 

Fatty acids are susceptible to oxidative attack and cleavage of the fatty acid chain. As oxidation proceeds, the shorter-chain fatty acids break off and produce progressively higher levels of malodorous material. This condition is known as rancidity. Another source of rancidity in fatty foods is the enzymatic hydrolysis of the fatty acid from the glycerol. The effect of this reaction on nutritional aspects of foods is poorly understood andhttie research has been done in the area. 

Fats and oils are one of the oldest classes of chemical compounds used by humans. Animal fats were prized for edibiUty, candles, lamp oils, and conversion to soap. Fats and oils are composed primarily of triglycerides (1), esters of glycerol and fatty acids. However, some oils such as sperm whale (1), jojoba (2), and orange roughy (3) are largely composed of wax esters (2). Waxes (qv) are esters of fatty acids with long-chain aUphatic alcohols, sterols, tocopherols, or similar materials. 

Fatty acids derived from animal and vegetable sources generally contain an even number of carbon atoms siace they are biochemically derived by condensation of two carbon units through acetyl or malonyl coenzyme A. However, odd-numbered and branched fatty acid chains are observed ia small concentrations ia natural triglycerides, particularly mminant animal fats through propionyl and methylmalonyl coenzyme respectively. The glycerol backbone is derived by biospeciftc reduction of dihydroxyacetone. 

Sohd fats may show drastically different melting behavior. Animal fats such as tallow have fatty acids distributed almost randomly over all positions on the glycerol chain. These fats melt over a fairly broad temperature range. Conversely, cocoa has unsaturated fatty acids predominantly in the 2 position and saturated acids in the 1 and 3 positions. Cocoa butter is a brittle sohd at ambient temperature but melts rapidly just below body temperature. 

Manufacture of Fatty Acids and Derivatives. Splitting of fats to produce fatty acids and glycerol (a valuable coproduct) has been practiced since before the 1890s. In early processes, concentrated alkaU reacted with fats to produce soaps followed by acidulation to produce the fatty acids. Acid-catalyzed hydrolysis, mostly with sulfuric and sulfonic acids, was also practiced. Pressurized equipment was introduced to accelerate the rate of the process, and finally continuous processes were developed to maximize completeness of the reaction (105). Lipolytic enzymes maybe utilized to spHt... 

The sweet water from continuous and batch autoclave processes for splitting fats contains tittle or no mineral acids and salts and requires very tittle in the way of purification, as compared to spent lye from kettle soapmaking (9). The sweet water should be processed promptly after splitting to avoid degradation and loss of glycerol by fermentation. Any fatty acids that rise to the top of the sweet water are skimmed. A small amount of alkali is added to precipitate the dissolved fatty acids and neutralize the liquor. The alkaline liquor is then filtered and evaporated to an 88% cmde glycerol. Sweet water from modem noncatalytic, continuous hydrolysis may be evaporated to ca 88% without chemical treatment. 

Esters. The mono- and diesters of glycerol and fatty acids occur naturally ia fats that have become partially hydrolyzed. The triglycerides are primary components of aaturaHy occurring fats and fatty oils. 

Epo>y Compounds. Epoxidized soya oil (ESO) is the most widely used epoxy-type additive and is found ia most mixed metal stabilized PVC formulations at 1.0—3.0 phr due to its versatiHty and cost effectiveness. Other usefiil epoxy compounds are epoxidized glycerol monooleate, epoxidized linseed oil, and alkyl esters of epoxidized tall oil fatty acid. 

Fig. 1. Chemical stmcture of phosphatidylcholine (PC) (1) and other related phosphohpids. R C O represents fatty acid residues. The choline fragment may be replaced by other moieties such as ethanolamine (2) to give phosphatidylethanolamine (PE), inositol (3) to give phosphatidylinositol (PI), serine (4), or glycerol (5). IfH replaces choline, the compound is phosphatidic acid (6). The corresponding lUPAC-lUB names ate (1), l,2-diacyl-t -glyceto(3)phosphocholine (2), l,2-diacyl-t -glyceto(3)phosphoethanolamine (3), 1,2-diacyl-t -glyceto(3)phosphoinositol (4), 1,2-diacyl-t -glyceto(3)phospho-L-serine and (5), l,2-diacyl-t -glyceto(3)phospho(3)-t -glycetol.

Hydrolysis. The first effect of either acid hydrolysis or alkaline hydrolysis (saponification) is the removal of the fatty acids. The saponification value of commercial lecithin is 196. Further decomposition into glycerol, phosphoric acid, and head groups (ie, choline, ethanolamine, etc) may foUow prolonged heating. Lecithin may also be hydrolyzed by enzymes. 

Alkyd resins are produced by reaction of a polybasic acid, such as phthaUc or maleic anhydride, with a polyhydric alcohol, such as glycerol, pentaerythritol, or glycol, in the presence of an oil or fatty acid. The resulting polymeric material can be further modified with other polymers and chemicals such as acryhcs, siUcones, and natural oils. On account of the broad selection of various polybasic acids, polyhydric alcohols, oils and fatty acids, and other modifying ingredients, many different types of alkyd resins can be produced that have a wide range of coating properties (see Alkyd resins). 

---