Ethyl pyrrolidone

Figures 3 and 4 give displacement isotherms of PVP adsorbed on pyrogenic silica. The polymer surface excess is plotted versus the volume fraction of displacer < >d. Results in Figure 3 are for water as the solvent and in Figure 4 for dioxane as the solvent. Various displacers were used, as indicated in the figures. One of the displacers was N-ethyl pyrrolidone (NEP), which can be considered as the monomer of PVP. From the isotherm in dioxane, it was found that In = 0.14. The aqueous system shows strong...

Copolymers of vinyl pyrrolidone with vinyl acetate, styrene and ethyl aerylate have been marketed by the General Aniline and Film Corporation. See also section 18. 

The reactivity of the methylene group adjacent to the lactam group affords the possibility of a Claisen condensation. Thus, treatment of 2-pyrrolidone or 2-piperidone with ethyl oxalate leads to the J -pyrroline-carboxylic (70) and, d -piperideine-2-carboxylic acids (71), respectively. N-methyl lactams furnish N-methyl derivatives (72,73) (Scheme 3). 

A series of pyrrolidones shows promise of being cognitionenhancing agents. One of these, amacetam 3), is synthesized readily by ester-amide exchange between ethyl 2-oxo-l-pyrroli-dineacetate U) and ]1, -di isopropyl ethyl enedi amine ( ). ... 

Pyrrolidone is first reacted with sodium hydride, then with ethyl chloroacetate to give ethyl 2-OXO-1 -pyrrolidine acetate. 

MMA, styrene, 2-hydroxy ethyl methyacrylate, 2-hy-droxypropyl methacrylate, acrylic and methacrylic acids, acrylamide and N-vinyl pyrrolidone (NVP) [64]. By this process, polyurethane is partially converted to N-chloro or N-bromo derivatives by a short immersion... 

Galactosylated chitosan prepared from lactobionic acid and chitosan with l-ethyl-3-(3-dimethylaminopropyl)-carbodiimideand N-hydroxysuccinimide was a good extracellular matrix for hepatocyte attachment [155] (Fig. 4). Furthermore, graft copolymers of galactosylated chitosan with poly(ethylene glycol) or poly(vinyl pyrrolidone) were useful for hepatocyte-targeting DNA carrier [156,157]. 

The nonionic monomer can be acrylamide, N,N-dimethylacrylamide, N-vinyl-2-pyrrolidone, N-vinyl acetamide, or dimethylamino ethyl methacrylate. Ionic monomers are AMPS, sodium vinyl sulfonate, and vinylbenzene sulfonate. The terpolymer should have a molecular weight between 200,000 to 1,000,000 Dalton. 

Preparation of the quaternary anticholinergic agent benzilonium bromide (47) is begun by conjugate addition of ethylamine to methylacrylate, giving aminoester 42. Alkylation of 42 with methyl bromo-acetate leads to diester 43, which is transformed into pyrrolidone 44 by Dieckmann cyclization, followed by decarboxylation. Reduction of 44 by lithium aluminum hydride leads to the corresponding amino-alcohol (45). Transesterification of alcohol 45 with methyl benzilate leads to 46. Benzilonium bromide (47) is obtained by alkylation of ester 46 with ethyl bromide. 2... 

Figure 3. Experimental displacement isotherms of poly (vinyl pyrrolidone) from silica in water/displacer mixtures. NMP N-methyl pyrrolidine PYR Pyridine NEM N-ethyl morpholine DMSO dimethylsulfoxide...

Corydalis is a genus of the family Fumariaceae that is represented by some 320 species growing in the temperate climates of the northern hemisphere. Corydalis pallida Pers. var. tenuis from Japan was simultaneously examined for alkaloids by two groups of investigators (88, 89). Besides benzylisoquinoline-type alkaloids, rra/w-3-ethylidene-2-pyrrolidone (50) (alkaloid P) was present. The alternative formula 51 was ruled out by the nonidentity of the hydrogenation product of 50 with an authentic sample of 5-ethyl-2-pyrrolidone (52). Alkaloid... 

A related Heck reaction of substituted o-bromoacetanilides with styrenes followed by selenium-induced cyclization of the resulting o-styiylacetanilides gives 2-arylindoles [378], Substituted o-bromonitrobenzenes react with ethyl vinyl ether under the influence of Pd(OAc)2 to give the corresponding o-ethoxyethenylnitrobenzenes. Zinc reduction then yields indoles [379]. The one-step Pd-catalyzed conversion of o-bromoanilines to indoles 302 with enamines (or with A/-vinyl-2-pyrrolidone) has been reported [380]. 

For the addition of ethylene, EtOAc as solvent was particularly advantageous and gave 418 in 60% yield (Scheme 6.86). The monosubstituted ethylenes 1-hexene, vinylcyclohexane, allyltrimethylsilane, allyl alcohol, ethyl vinyl ether, vinyl acetate and N-vinyl-2-pyrrolidone furnished [2 + 2]-cycloadducts of the type 419 in yields of 54—100%. Mixtures of [2 + 2]-cycloadducts of the types 419 and 420 were formed with vinylcyclopropane, styrene and derivatives substituted at the phenyl group, acrylonitrile, methyl acrylate and phenyl vinyl thioether (yields of 56-76%), in which the diastereomers 419 predominated up to a ratio of 2.5 1 except in the case of the styrenes, where this ratio was 1 1. The Hammett p value for the addition of the styrenes to 417 turned out to be -0.54, suggesting that there is little charge separation in the transition state [155]. In the case of 6, the p value was determined as +0.79 (see Section 6.3.1) and indicates a slight polarization in the opposite direction. This astounding variety of substrates for 417 is contrasted by only a few monosubstituted ethylenes whose addition products with 417 could not be observed or were formed in only small amounts phenyl vinyl ether, vinyl bromide, (perfluorobutyl)-ethylene, phenyl vinyl sulfoxide and sulfone, methyl vinyl ketone and the vinylpyri-dines. 

Radiation Induced Reactions. Graft polymers have been prepared from poly(vinyl alcohol) by the irradiation of the polymer-monomer system and some other methods. The grafted side chains reported include acrylamide, acrylic acid, acrylonitrile, ethyl acrylate, ethylene, ethyl methacrylate, methyl methacrylate, styrene, vinyl acetate, vinyl chloride, vinyl pyridine and vinyl pyrrolidone (13). Poly(vinyl alcohols) with grafted methyl methacrylate and sometimes methyl acrylate have been studied as membranes for hemodialysis (14). Graft polymers consisting of 50% poly(vinyl alcohol), 25% poly(vinyl acetate) and 25% grafted ethylene oxide units can be used to prepare capsule cases for drugs which do not require any additional plasticizers (15). 

However, morpholine-4-carboxylic acid 2-hydroxy-1-methyl-ethyl ester is formed by the reaction of PC and the substrate morpholine in an undesired side reaction. By use of 1.4-dioxane or the pyrrolidones as mediator s3 about 30 to 45% of the morphoUne is consumed by this side reaction. The by-product is contained in the PC phase and can not be extracted to the non-polar product phase. The selectivity to the desired amines is lowered, because of the consiunption of the morphoUne. Thus, PC has to be substituted by another polar solvent (e.g. water, methanol or ethylene glycol) in future experiments. The lactates react with the morphoUne, too resulting in the corresponding amide. Overall, the hydroaminomethylation in the TMS systems PC/dodecane/lactate results in a conversion of 1-octene of about 80%, but in selectivities to the amines of only 50 to 60%. 

The amidic group in methyl A -acetyl-p-aminobenzoate was reduced preferentially to an ester group with borane in tetrahydrofuran (1.5-1.8 mol per mol of the amide), giving 66% yield of methyl p-A -ethylaminobenzoate. Similarly l-benzyl-3-methoxycarbonyl-5-pyrrolidone afforded methyl l-ben2yl-3-pyr-rolidinecarboxylate in 54% yield and l,2-diethyl-5-ethoxycarbonyl-3-pyra-zolidone gave ethyl l,2-diethylpyrazolidine-3-carboxylate in 60% yield. 

Nicotine Nicotine, l-methyl-2-(3-piridyl)pirrolidine (13.1.27), is an alkaloid that is isolated from the plant Nicotiana (Nicotiana tabacum, Nicotiam rustica, and others) and can be synthesized in varions ways [33-36]. In particular, it is proposed to proceed from nicotinic acid ethyl ester, which is condensed with iV-methylpyrrolidone, giving l-methyl-2-nicotinoyl pyrrolidone-2 (13.1.23). Acidic hydrolysis of this compound leads to an opening of the pyrrolidine ring giving the intermediate (13.1.24), which under the reaction conditions is decarboxylated to the /-aminoketone (13.1.25). The carbonyl group is reduced to an alcohol and the resnlting prodnct (13.1.26) undergoes dehydration to nicotine (13.1.27). 

Methacrylic acid Acrylic acid Di-isobutylene Acrylonitrile Allyl acrylate Allyl methacrylate n-Butyi acrylate n-Butyl methacrylate isobutyl methacrylate 2-Chloroethyl methacrylate -Ethoxyethyl methacrylate Ethyl acrylate 2-Ethylhexyl acrylate Ethyl methacrylate Lauryl methacrylate Nonyl methacrylate N-Vinyl pyrrolidone Octyl acrylate 2-Vinyl pyridine... 

Acrylonitrile Allyl acrylate Allyl methacrylate n-Butyl acrylate n-Butyl methacrylate Isobutyl methacrylate Divinyl benzene 2-Choroethyl methacrylate Ethyl acrylate /i-Ethoxyethyl methacrylate 2-Ethylhexyl methacrylate Ethyl methacrylate Methyl methacrylate Methylisopropenylketone Methyl vinyl ketone N-Vinyl pyrrolidone Styrene Vinylpyridine Acrylonitrile Allyl acrylate Allyl methacrylate... 

The dibasic side chain at position 7 can be alternatively provided by a substituted amino alkyl pyrrolidine. Preparation of that diamine in chiral form starts with the extension of the ester function in pyrrolidone (46-1) by aldol condensation with ethyl acetate (46-2). Acid hydrolysis of the (3-ketoester leads to the free acid that then decarboxylates to form an acetyl group (46-3). The carbonyl group is next converted to an amine by sequential reaction with hydroxylamine to form the oxime, followed by catalytic hydrogenation. The desired isomer (46-4) is then separated... 

The literature reports direct grafting by gamma-rays exposure of Nylon fibers or films to the following monomers carbon monoxide (/65), ethylene (157), propylene (157), acetylene (166), butadiene (157.162,163), styrene (158, 161,163,167,168), vinyl chloride (157,163), vinyl fluoride (169-172), vinyl acetate (161,163,173), vinyl propionate (161), vinyl butyrate (161), vinyl crotonate (161), vinyl 2-ethyl hexanoate (161), acrylic add (173,174), methyl acrylate (162, 163), ethyl acrylate (162,163), allyl acrylate (163), methyl methacrylate (28,161, 163,164), butyl methacrylate (161), acrylamide (158), methylol acrylamide (163), acrylonitrile (157,160-163, 167, 175-179), divinyl sulfone (161), vinyl pyridine (167,173), vinyl pyrrolidone (28) and triallyl cyanurate (158). 

---