Emulsion cleaners

Emulsion cleaners These are emulsified chlorinated solvents and are kerosene based, suitable for mineral oils (petroleum and heavy petroleum greases) and deep-drawn components, using lead compounds as lubricants. They are also suitable for non-ferrous metals. 

Emulsion cleaners can be used hot or cold. Heat generally improves the cleaning action but, in most cases, leads to an objectionable increase in the smell associated with solvent products. 

Additionally the inspector should ensure that the specified measures for removing oil and grease from the surface with water-rinsable solvent or emulsion cleaners are implemented, and that all weld-spatter and other asperities have been removed as a preliminary to surface preparation. 

Concentrated d-Limonene Biodegradable Deoreaser A Natural All-Purpose Micro-Emulsion Cleaner or Concentrate... 

The purpose of cleaning steel is to remove dirt and leave the article in a state in which it can be dehvered for use without further finishing. The surface must therefore be covered with a tenacious corrosion-resistant coating as it emerges from the cleaning bath. Many emulsion cleaners remove lubricants and other unwanted dirt whUe depositing an anticorrosive coating on the metal. The primary test for efficacy in this situation is a corrosive test of the cleaned article. 

AI3-00971 Diethylene glycol monooleate EINECS 203-364-0 9-Octadecenoic acid (9Z)-, 2-(2-hydroxy-ethoxy)ethyl ester 9-Octadecenoic acid, 2-(2-hydroxy-ethoxy)ethyl ester PEG-2 Oleate Polyethylene glycol 100 monooleate Polyoxyethylene (2) monooleate. Emulsifier, dispersant, antistat for cosmetic, textile, paper processing, cutting oils, polishes, emulsion cleaners, rubber latex, wool lubrioants leather softener. Henkel/Emery. 

Thorough mixing will result in a coarse, but very stable emulsion cleaner for greasy machine parts which are not attacked by the sol vent. 

Emulsion cleaners combination of alkaline, organic cleaners, and emulsifiers. 

Uses Detoamer for systems containing surfactants, emulsitiers, and cleaning suds, e.g., emulsion printing inks, disp. adhesives, high-gloss emulsion paints, aq. industrial coatings, solv.-tree emulsions, cleaners, wallpaper removers Properties Liq. 

Chem. Descrip. Modified tall oil DEA (1 1), water-based CAS 68153-57-1 EINECS/ELINCS 268-949-5 Uses Corrosion inhibitor, lubricant, and emulsifier for syn. metalworking fluids, sol. and emulsifiable oils, chain lubricants, protective coating oils, rolling oils, emulsion cleaners, oil well drilling, water/min. oil coolants in resin-bonded filters for food contact Regulatory FDA 21 CFR 177.2260 DOT nonregulated Properties Dk. amber liq. sol. in most soivs. oils disp. in water sp.gr. 1.0 g/ml b.p. > 300 F acid no. 5.0-15.0 flash pt. (PMCC) > 200 F pH 8.5-10.5 (1% in DVV) anionic/nonionic 100% cone. 

Uses Emulsifier, corrosion inhibitor, softener, antistat, wetting agent, flocculant, lubricant for textiles, asphalt, car wax emulsions, cleaners, paint mfg., agric. applies., syn. coolants dispersant for clay and pigments in solv. systems tar emulsion breaker Properties Brn. liq. amine odor sol. in min. oil and spirits, aromatic solv., perchloroethylene water-disp. dens. 0.94 g/ml f.p. 5 C cationic 85% act. 

HMIS Health 0, Flammability 1, Reactivity 0 Uses Emollient, emulsifier, solubilizer, dispersant In cosmetics, pharmaceuticals coupling agent plasticizer emulsifier, dispersant, antlstat for textiles, paper processing, cutting oils, polishes, emulsion cleaners, rubber latexes, wool lubricants surfactant In foods In food-pkg. adhesives Features Lipid... 

Uses Emulsifier in hard-surf, cleaners emulsifier, corrosion inhibitor in sol. cutting oils corrosion inhibitor, lubricant, emulsifier, detergent for syn. coolants, chain lubricants, emulsion cleaners surfactant for pharmaceuticals antistat, vise, control agent in cosmetics in food-pkg. adhesives defoamer in food-contact paper/paperboard in food-con-tact textiles... 

---