Emulsion carboxylic

Acrylics. Acetone is converted via the intermediate acetone cyanohydrin to the monomer methyl methacrylate (MMA) [80-62-6]. The MMA is polymerized to poly(methyl methacrylate) (PMMA) to make the familiar clear acryUc sheet. PMMA is also used in mol ding and extmsion powders. Hydrolysis of acetone cyanohydrin gives methacrylic acid (MAA), a monomer which goes direcdy into acryUc latexes, carboxylated styrene—butadiene polymers, or ethylene—MAA ionomers. As part of the methacrylic stmcture, acetone is found in the following major end use products acryUc sheet mol ding resins, impact modifiers and processing aids, acryUc film, ABS and polyester resin modifiers, surface coatings, acryUc lacquers, emulsion polymers, petroleum chemicals, and various copolymers (see METHACRYLIC ACID AND DERIVATIVES METHACRYLIC POLYMERS). 

Almost all synthetic binders are prepared by an emulsion polymerization process and are suppHed as latexes which consist of 48—52 wt % polymer dispersed in water (101). The largest-volume binder is styrene—butadiene copolymer [9003-55-8] (SBR) latex. Most SBRlatexes are carboxylated, ie, they contain copolymerized acidic monomers. Other latex binders are based on poly(vinyl acetate) [9003-20-7] and on polymers of acrylate esters. Poly(vinyl alcohol) is a water-soluble, synthetic biader which is prepared by the hydrolysis of poly(viayl acetate) (see Latex technology Vinyl polymers). 

Third Monomers. In order to achieve certain property improvements, nitrile mbber producers add a third monomer to the emulsion polymerization process. When methacrylic acid is added to the polymer stmcture, a carboxylated nitrile mbber with greatly enhanced abrasion properties is achieved (9). Carboxylated nitrile mbber carries the ASTM designation of XNBR. Cross-linking monomers, eg, divinylbenzene or ethylene glycol dimethacrylate, produce precross-linked mbbers with low nerve and die swell. To avoid extraction losses of antioxidant as a result of contact with fluids duriag service, grades of NBR are available that have utilized a special third monomer that contains an antioxidant moiety (10). FiaaHy, terpolymers prepared from 1,3-butadiene, acrylonitrile, and isoprene are also commercially available. 

Latex Types. Latexes are differentiated both by the nature of the coUoidal system and by the type of polymer present. Nearly aU of the coUoidal systems are similar to those used in the manufacture of dry types. That is, they are anionic and contain either a sodium or potassium salt of a rosin acid or derivative. In addition, they may also contain a strong acid soap to provide additional stabUity. Those having polymer soUds around 60% contain a very finely tuned soap system to avoid excessive emulsion viscosity during polymeri2ation (162—164). Du Pont also offers a carboxylated nonionic latex stabili2ed with poly(vinyl alcohol). This latex type is especiaUy resistant to flocculation by electrolytes, heat, and mechanical shear, surviving conditions which would easUy flocculate ionic latexes. The differences between anionic and nonionic latexes are outlined in Table 11. 

Other polymers used in the PSA industry include synthetic polyisoprenes and polybutadienes, styrene-butadiene rubbers, butadiene-acrylonitrile rubbers, polychloroprenes, and some polyisobutylenes. With the exception of pure polyisobutylenes, these polymer backbones retain some unsaturation, which makes them susceptible to oxidation and UV degradation. The rubbers require compounding with tackifiers and, if desired, plasticizers or oils to make them tacky. To improve performance and to make them more processible, diene-based polymers are typically compounded with additional stabilizers, chemical crosslinkers, and solvents for coating. Emulsion polymerized styrene butadiene rubbers (SBRs) are a common basis for PSA formulation [121]. The tackified SBR PSAs show improved cohesive strength as the Mooney viscosity and percent bound styrene in the rubber increases. The peel performance typically is best with 24—40% bound styrene in the rubber. To increase adhesion to polar surfaces, carboxylated SBRs have been used for PSA formulation. Blends of SBR and natural rubber are commonly used to improve long-term stability of the adhesives. 

Guo et al. [70,71,73] recently attempted to hydrogenate NBR in emulsion form using Ru-PCy complexes. However, successful hydrogenation can only be obtained when the emulsion is dissolved in a ketone solvent (2-butanone). A variety of Ru-phosphine complexes have been studied. Crosslinking of the polymer could not be avoided during the reaction. The use of carboxylic acids or first row transition metal salts as additives minimized the gel formation. The reactions under these conditions require a very high catalyst concentration for a desirable rate of hydrogenation. 

Ether carboxylates can be used in oil-in-water (O/W) emulsions as emulsifiers, stabilizers, and to maintain the pH at 4.5-7.5 [101,102]. Also silicones can be emulsified [103]. Stearylamidether carboxylic acid is used as a mild and effective O/W emulsifer [68,69]. 

Results described in the literature have resulted in several patents, such as one for the improvement of the transport of viscous crude oil by microemulsions based on ether carboxylates [195], or combination with ether sulfate and nonionics [196], or several anionics, amphoterics, and nonionics [197] increased oil recovery with ether carboxylates and ethersulfonates [198] increased inversion temperature of the emulsion above the reservoir temperature by ether carboxylates [199], or systems based on ether carboxylate and sulfonate [200] or polyglucosylsorbitol fatty acid ester [201] and eventually cosolvents which are not susceptible for temperature changes. Ether carboxylates also show an improvement when used in a C02 drive process [202] or at recovery by steam flooding [203]. 

Aqueous, removable, pressure-sensitive adhesive compositions, useful for high-performance applications, comprise a mixture of a copolymer of alkyl (meth)acrylate and N-substituted (poly)amide of (meth)acrylic acid and a copolymer of alkyl (meth)acrylate and ethylenically unsaturated carboxylic acid, where at least one of the copolymers is an emulsion copolymer. Polyoxyalkyl-enes and phosphate esters may be used as surfactants [234]. 

The development of monoalkyl phosphate as a low skin irritating anionic surfactant is accented in a review with 30 references on monoalkyl phosphate salts, including surface-active properties, cutaneous effects, and applications to paste and liquid-type skin cleansers, and also phosphorylation reactions from the viewpoint of industrial production [26]. Amine salts of acrylate ester polymers, which are physiologically acceptable and useful as surfactants, are prepared by transesterification of alkyl acrylate polymers with 4-morpholinethanol or the alkanolamines and fatty alcohols or alkoxylated alkylphenols, and neutralizing with carboxylic or phosphoric acid. The polymer salt was used as an emulsifying agent for oils and waxes [70]. Preparation of pharmaceutical liposomes with surfactants derived from phosphoric acid is described in [279]. Lipid bilayer vesicles comprise an anionic or zwitterionic surfactant which when dispersed in H20 at a temperature above the phase transition temperature is in a micellar phase and a second lipid which is a single-chain fatty acid, fatty acid ester, or fatty alcohol which is in an emulsion phase, and cholesterol or a derivative. 

The amount of added water required for desalting may be minimized by adding a chemical emulsion breaker to the crude that is capable of displacing the surface-active components from the brine droplets. Quatemized carboxylic-sulfonic acid salts, shown in Figure 22-9, are useful for desalting [1791]. Preferably, the chemical emulsion breaker is used in combination with a delivery solvent, such as diethylene glycol monobutyl ether. 

The carboxylated polymers [476,499] include acrylic, methacrylic or maleic acid polymers (all obviously anionic in character) applied mainly from aqueous emulsion and particularly in combination with crease-resist or durable press resins. This type of chemistry has already been discussed in section 10.8.2. A particularly common example is the copolymer of acrylic acid with ethyl acrylate (10.247). In general the best balance of properties is obtained with 75-85% ethyl acrylate (y) and 25-15% acrylic acid (x), with an average chain length of about 1300 (x + y) units 65-85% ethyl acrylate with 35-15% methacrylic acid is also suitable. When the content of the acidic comonomer increases above about 30% the durability to washing tends to decrease, whilst longer chains tend to give a stiffer handle [499]. 

Unsaturated polyesters that are terminated by carboxylic acid groups at both ends of the chain after neutralization are efficient emulsifiers for lipophilic monomers [110] and thus act as self-emulsifying crosslinking agents in the ECP of these systems. Normal emulsions of EUP and comonomers have a white, milky appearance. With an appropriate structure and molar mass of the EUP and within a certain range of EUP/comonomer ratios, however, microemulsions are... 

Unsaturated polyesters with neutralized terminal carboxyl acid groups (EUP) are efficient emulsifiers which, at a sufficient concentration, may form aqueous microemulsions. Micro emulsions are liquid dispersions of translucent (opalescent or transparent) appearance. Their disperse phase contains particles of diameters between 20 and 80 nm which closely approaches the diameters (5-15 nm) of micelles [114]. 

By first dispersing the EUP in water containing the base for neutralization of the carboxyl acid groups of the EUP and then adding the comonomer with intensive stirring, normal emulsions are obtained. They are favorable because, with multiple emulsions, insoluble polymers are formed, which decrease the yield of microgels. 

Vinyl groups of 1,4-DVB microgels have been converted to carboxylic acid groups by ozone [291]. After modification the microgels could be dissolved in methanol. About 83 % of the vinyl groups could be converted. A simpler way to prepare microgels with carboxyl acid groups at their surface is the copolymerization of DVB with methacrylic acid in an aqueous emulsion [292]. 

Benzyldimethyldodecylammonium hydroxide (BDDOH), in emulsion polymerization of siloxanes, 22 561 Benzyl formate, physical properties, 6 292t Benzylic carboxylic esters, cleavage of,... 

Ruthenium complexes B are stable in the presence of alcohols, amines, or water, even at 60 °C. Olefin metathesis can be realized even in water as solvent, either using ruthenium carbene complexes with water-soluble phosphine ligands [815], or in emulsions. These complexes are also stable in air [584]. No olefination of aldehydes, ketones, or derivatives of carboxylic acids has been observed [582]. During catalysis of olefin metathesis replacement of one phosphine ligand by an olefin can occur [598,809]. 

Polarization. The development of an electrical charge when in solution (with water.) Water, alcohol, and sulfuric acid. are polar but most hydrocarbons are not. Some carboxyl groups and hydroxyl groups are polar. Polarization is important to the formation of emulsions and the actions of detergents. 

Observations of large contact angles in emulsions were first reported by Aronson and Princen [105,106]. The authors have studied oil-in-water droplets stabilized by anionic surfactant in the presence of various salts. Similar systems were studied by Poulin [110]. Anionic surfactants such as sulfate, sulfonate, or carboxylate surfactants [106,110] exhibit a good stability and a strong adhesion in the presence... 

---