Domestication, effects

In any event, the results tend to reinforce the notion that longitudinal studies are needed to evaluate domestication effects. 

Biol, prop. Activity as bactericide against Staphylococcus aureus (2126). Activity as fungicide against Aspergillus niger, Venturis inaequalis (2126). Activity as insecticide against yellow fever mosquito larvae (2126), Musca domestics, effect on reporduction (26O), Prodenia eridania larvae (2126). Phytotoxicity to foliage of woody plants (2126). 

Coal is expected to be the best domestic feedstock alternative to natural gas. Although coal-based ammonia plants have been built elsewhere, there is no such plant in the United States. Pilot-scale projects have demonstrated effective ammonia-from-coal technology (102). The cost of ammonia production can be anticipated to increase, lea ding to increases in the cost of producing nitrogen fertilizers. 

The U.S. domestic capacity of ammonium perchlorate is roughly estimated at 31,250 t/yr. The actual production varies, based on the requirements for soHd propellants. The 1994 production ran at about 11,200 t/yr, 36% of name plate capacity. Environmental effects of the decomposition products, which result from using soHd rocket motors based on ammonium perchlorate-containing propellants, are expected to keep increasing pubHc pressure until consumption is reduced and alternatives are developed. The 1995 price of ammonium perchlorate is in the range of 1.05/kg. Approximately 450 t/yr of NH ClO -equivalent cell Hquor is sold to produce magnesium and lithium perchlorate for use in the production of batteries (113). Total U.S. domestic sales and exports for sodium perchlorate are about 900 t/yr. In 1995, a solution containing 64% NaClO was priced at ca 1.00/kg dry product was also available at 1.21/kg. 

W. J. Hayes, Jr., and E. R. Laws, Jr., eds.. Handbook of Pesticide Toxicology, Academic Press, Inc., San Diego, Calif., 1990. Three volume set provides detailed toxicological profiles of more than 250 insecticides, herbicides, and fungicides each compound described by identity, properties, and uses toxicity to humans, laboratory animals, domestic animals, and wildlife includes comprehensive coverage of diagnosis, treatment, prevention of injury, effects on domestic animals, wildlife, and humans - ISjOOO references. 

The LD q for sodium bromide taken orally by rats is 3.5 g/kg body weight, and the TD q orally in rats is 720 mg/kg (8). RTECS Hsts data on reproductive effects in male and female rats. Sodium bromide is Hsted in the TSCA Inventory, the Canadian Domestic Substances Hst (DSL), the European Inventory of Existing Commercial Chemical Substances (EINECS), the Japanese Existing and New Chemical Substances (ENCS), and the Korean Existing Chemicals Hst (ECL). It is not regulated by the U.S. Department of Transportation. 

National Defense Stockpile Goal for tin at 42,700 metric tons. On January 2, 1980, the Strategic and Critical Materials Transaction Authorization Act became effective. This authorizes the President to dispose of materials determined to be excessive to the current needs of the stockpile. This act provides for the sale of up to 35,600 metric tons of tin, including a contribution of up to 5100 metric tons of tin to the International Tin Council (ITC) buffer stock (see below). The GSA set up a schedule to offer about 500 metric tons of Grade A tin, for domestic sales and consumption only, every other Tuesday beginning July 1, 1980. On December 14, 1981, the restrictions on exporting the GSA tin sold were lifted sales increased immediately. Thus, from July 1, 1980, through December 11, 1981, the total GSA sales were 3170 metric tons. An additional 1815 metric tons were sold soon thereafter, mostiy to traders (10). 

Most surface waters contain varying amounts of suspended solids, including silt, clay, bacteria, and vimses and it is necessary to remove these before to distribution to the domestic or industrial consumer. Suspended soHds not only affect the acceptabiUty of the water but also interfere with disinfection. The principal treatment processes are sedimentation (qv) and filtration (qv). Sedimentation alone is rarely adequate for the clarification of turbid waters and is of htde or no value for the removal of such very fine particles as clay, bacteria, etc. Table 1 shows the effect of particle size on the sedimentation rate of a soHd having a specific gravity of 2.65 in water at 20°C. 

Paint pigments do not change colors on appHcation. Other common colors are violet from cobalt(II) phosphate [18475-47-3] pink from cobalt and magnesium oxides, aureolin yellow from potassiuim cobalt(III) nitrite [13782-01-9], KCo(N02)4, and cerulean blue from cobalt staimate [6546-12-5]. Large quantities of cobalt are used at levels of a few ppm to decolori2e or whiten glass and ceramics. Iron oxide or titanium dioxide often impart a yellow tint to various domestic ware. The cobalt blue tends to neutrali2e the effect of the yellow. 

Heavy metals on or in vegetation and water have been and continue to be toxic to animals and fish. Arsenic and lead from smelters, molybdenum from steel plants, and mercury from chlorine-caustic plants are major offenders. Poisoning of aquatic life by mercury is relatively new, whereas the toxic effects of the other metals have been largely eliminated by proper control of industrial emissions. Gaseous (and particulate) fluorides have caused injury and damage to a wide variety of animals—domestic and wild—as well as to fish. Accidental effects resulting from insecticides and nerve gas have been reported. 

The reluctance of acrylic monomers to polymerise in the presence of air has been made a virtue with the anaerobic acrylic adhesives. These are usually dimethacrylates such as tetramethylene glycol dimethacrylate. The monomers are supplied with a curing system comprising a peroxide and an amine as part of a one-part pack. When the adhesive is placed between mild steel surfaces air is excluded, which prevents air inhibition, and the iron present acts as a polymerisation promoter. The effectiveness as a promoter varies from one metal to another and it may be necessary to use a primer such as cobalt naphthenate. The anaerobic adhesives have been widely used for sealing nuts and bolts and for a variety of engineering purposes. Small tube containers are also available for domestic use. 

Other factors which can affect impact behaviour are fabrication defects such as internal voids, inclusions and additives such as pigments, all of which can cause stress concentrations within the material. In addition, internal welds caused by the fusion of partially cooled melt fronts usually turn out to be areas of weakness. The environment may also affect impact behaviour. Plastics exposed to sunlight and weathering for prolonged periods tend to become embrittled due to degradation. Alternatively if the plastic is in the vicinity of a fluid which attacks it, then the crack initiation energy may be reduced. Some plastics are affected by very simple fluids e.g. domestic heating oils act as plasticisers for polyethylene. The effect which water can have on the impact behaviour of nylon is also spectacular as illustrated in Fig. 2.80. 

The deleterious effect of sulfur dioxide and sulfites in domestic water is increased corrosivity owing to the lowered pH. However, oxidation of sulfite to sulfate in aqueous solutions uses dissolved oxygen, and lliis may retard corrosion. While llte oxichition of sulfite and sulfiirous acid to sulfate and sulfuric acid in the atmosphere is an environmental concern, this reaction is too... 

A risk estimate indicates Uie likelihood of occurrence of the different types of health or enviroinnental effects in exposed populations. Risk assessment should include both liuimn health and environmental evaluations (i.c., impacts on ecosystems). Ecological impacts include actual or potential effects on plants and animals (other than domesticated species). The number produced from the risk characleriznlion, representing the probability of adi crse... 

See also-. Climatic Effects Consumption Domestic Energy Use Electric Motor Systems Electric Power, Generation of Electric Power, System Protection, Control, and Monitoring of Electric Power Substations Electric Power Transmission and Distribution Systems Government and the Energy Marketplace Regulation and Rates for Electricity. 

---