Displace mechanism

The displacement mechanism involves placing the iron alloy packed in chiomium powder, NH Cl, and in a sealed retort, which is heated to... 

A number of theories have been put forth to explain the mechanism of polytype formation (30—36), such as the generation of steps by screw dislocations on single-crystal surfaces that could account for the large number of polytypes formed (30,35,36). The growth of crystals via the vapor phase is beheved to occur by surface nucleation and ledge movement by face specific reactions (37). The soHd-state transformation from one polytype to another is beheved to occur by a layer-displacement mechanism (38) caused by nucleation and expansion of stacking faults in close-packed double layers of Si and C. 

In order to answer these questions as directly as possible we begin by looking at diffusive and displacive transformations in pure iron (once we understand how pure iron transforms we will have no problem in generalising to iron-carbon alloys). Now, as we saw in Chapter 2, iron has different crystal structures at different temperatures. Below 914°C the stable structure is b.c.c., but above 914°C it is f.c.c. If f.c.c. iron is cooled below 914°C the structure becomes thermodynamically unstable, and it tries to change back to b.c.c. This f.c.c. b.c.c. transformation usually takes place by a diffusive mechanism. But in exceptional conditions it can occur by a displacive mechanism instead. To understand how iron can transform displacively we must first look at the details of how it transforms by diffusion. 

The concerted displacement mechanism implies both kinetic and stereochemical consequences. The reaction will exhibit second-order kinetics, first-order in both reactant... 

The ionization and direct displacement mechanisms can be viewed as the extremes of a mechanistic continuum. At the 8 1 extreme, there is no covalent interaction between the reactant and the nucleophile in the transition state for cleavage of the bond to the leaving group. At the 8 2 extreme, the bond formation to the nucleophile is concerted with the bondbreaking step. In between these two limiting cases lies the borderline area, in which the degree of covalent interaction between the nucleophile and the reactant is intermediate between the two limiting cases. The concept of ion pairs is important in the consideration of... 

Substitution reactions by the ionization mechanism proceed very slowly on a-halo derivatives of ketones, aldehydes, acids, esters, nitriles, and related compounds. As discussed on p. 284, such substituents destabilize a carbocation intermediate. Substitution by the direct displacement mechanism, however, proceed especially readily in these systems. Table S.IS indicates some representative relative rate accelerations. Steric effects be responsible for part of the observed acceleration, since an sfp- caibon, such as in a carbonyl group, will provide less steric resistance to tiie incoming nucleophile than an alkyl group. The major effect is believed to be electronic. The adjacent n-LUMO of the carbonyl group can interact with the electnai density that is built up at the pentacoordinate carbon. This can be described in resonance terminology as a contribution flom an enolate-like stmeture to tiie transition state. In MO terminology,.the low-lying LUMO has a... 

There is disagreement about the importance of the direct displacement mechanism in these reactions. Yet another mechanistic possibility is for reaction via the acylium ion. Scheme IV. 

Creatine Kinase Acts by a Random, Single-Displacement Mechanism... 

An example of a random, single-displacement mechanism is seen in the enzyme creatine kinase, a phosphoryl-transfer enzyme that uses ATP as a phosphoryl... 

NAD -Dependent Dehydrogenases Show Ordered Single-Displacement Mechanisms... 

Maltose phosphorylase cannot carry out a similar reaction. The P exchange reaction of sucrose phosphorylase is accounted for by a double-displacement mechanism where E = E-glucose ... 

Maltose phosphorylase proceeds via a single-displacement reaction that necessarily requires the formation of a ternary maltose E Pi (or glucose E glucose-l-phosphate) complex for any reaction to occur. Exchange reactions are a characteristic of enzymes that obey double-displacement mechanisms at some point in their catalysis. 

The addition-elimination mechanism involves two intermediates, a chlorophenyl anion and benzyne. A simple displacement mechanism can be ruled out because reaetion of ort/io-chlorotoluene gives not only ort/io-methylphenol but also meto-methylphenol. 

McLean, R. H., C. W. Maury, and W. W. Whitaker, Displacement mechanics in primary cementing, /owrna/ of Petroleum Technology, February 1967. 

The main source of spontaneous polarization in crystals is the relative freedom of cations that fit loosely into the crystal s octahedral cavities. The number of degrees of freedom of the octahedrons affects the spontaneous polarization value and hence influences the crystal s ferroelectric properties. Abrahams and Keve [389] classified ferroelectric materials into three structural categories according to their atomic displacement mechanisms onedimensional, two-dimensional and three-dimensional. 

Displacement Mechanisms. In these reactions the organic substrate uses its electrons to cause displacement on an electrophilic oxidizing agent. One example is the addition of bromine to an alkene (15-37). 

The lack of glycosyl transfer reaction is the class of pectinolytic hydrolases is in agreement with the observed inversion of the anomeric configuration of the newly formed reducing ends of the products. All three polygalacturonases studied here utilize the single displacement mechanism of hydrolysis. 

Consequences of the Snyder and Soczewinski model are manifold, and their praetieal importance is very signifieant. The most speetaeular conclusions of this model are (1) a possibility to quantify adsorbents ehromatographic activity and (2) a possibility to dehne and quantify chromatographic polarity of solvents (known as the solvents elution strength). These two conclusions could only be drawn on the assumption as to the displacement mechanism of solute retention. An obvious necessity was to quantify the effect of displacement, which resulted in the following relationship for the thermodynamic equilibrium constant of adsorption, K,, in the case of an active chromatographic adsorbent and of the monocomponent eluent ... 

The interfacial rheologic properties are extremely sensitive parameters toward the chemical composition of immiscible formation liquids [1053]. Therefore comparison and interpretation of the interfacial rheologic properties may contribute significantly to extension of the spectrum of the reservoir characterization, better understanding of the displacement mechanism, development of more profitable enhanced and improved oil-recovery methods, intensification of the surface technologies, optimization of the pipe line transportation, and improvement of the refinery operations [1056]. 

Secondary bromides and tosylates react with inversion of stereochemistry, as in the classical SN2 substitution reaction.24 Alkyl iodides, however, lead to racemized product. Aryl and alkenyl halides are reactive, even though the direct displacement mechanism is not feasible. For these halides, the overall mechanism probably consists of two steps an oxidative addition to the metal, after which the oxidation state of the copper is +3, followed by combination of two of the groups from the copper. This process, which is very common for transition metal intermediates, is called reductive elimination. The [R 2Cu] species is linear and the oxidative addition takes place perpendicular to this moiety, generating a T-shaped structure. The reductive elimination occurs between adjacent R and R groups, accounting for the absence of R — R coupling product. 

For either of the ternary complex mechanisms described above, titration of one substrate at several fixed concentrations of the second substrate yields a pattern of intersecting lines when presented as a double reciprocal plot. Hence, without knowing the mechanism from prior studies, one can not distinguish between the two ternary complex mechanisms presented here on the basis of substrate titrations alone. In contrast, the data for a double-displacement reaction yields a series of parallel lines in the double reciprocal plot (Figure 2.15). Hence it is often easy to distinguish a double-displacement mechanism from a ternary complex mechanism in this way. Also it is often possible to run the first half of the reaction in the absence of the second substrate. Formation of the first product is then evidence in favor of a doubledisplacement mechanism (however, some caution must be exercised here, because other mechanistic explanations for such data can be invoked see Segel, 1975, for more information). For some double-displacement mechanisms the intermediate E-X complex is sufficiently stable to be isolated and identified by chemical and/or mass spectroscopic methods. In these favorable cases the identification of such a covalent E-X intermediate is verification of the reaction mechanism. 

As a general statement, the reaction rate in each direction follows second-order kinetics for all the rhenium compounds studied. Moreover, the rate constants depend on the identities of L and Ly. Both findings argue for an associative (displacement) mechanism, which is also supported by the large and negative values of AS, that often reach —120 J K-1 mol-1 (39). 

This fluoroalkylation reaction is not a classical S 2 displacement mechanism, but instead follows an unusual pathway involving nucleophilic attack of phen-oxide on bromine to form an aryl hypobromite, according to the mechanism outlined in Figure 3.4. 

The interaction between calcium malate and ammonium oxalate results into an equivalent quantity of calcium oxalate by displacement mechanism which is subsequently precipitated ... 

---