Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Petroleum technological

G. D. Hobson and W. Pohl, Modem Petroleum Technology, 5tli ed., John Wiley Sons, Inc., New York, 1984, p. 517. [Pg.376]

Lapp, K. and Werneburg, H. 1999. Detonation Flame Arrester Application Parameters for Explosion Prevention m Vapour Handling Systems./. Canadian Petroleum Technology, Special Edition, 1949-1999, Paper 94-58. [Pg.195]

Wagenaar, W. A. (1992). Influencing Human Behavior Toward a Practical Approach for Exploration and Production. Journal of Petroleum Technology, November. [Pg.375]

Dnlling for Oil, Unit 4 Activity 4-4/Teacher, pp. 4-48 to 4—53. Washington, DC Teacher Training Program, National Petroleum Technology Office, Office of Fossil Energy, U.S. Department of Energy. [Pg.915]

As defined by the World Petroleum Congress/Society of Petroleum Engineers (modified from Grace, J. D. et al. (1993). "Comparative Reserves Definitions U.S.A., Europe, and the Former Soviet Union." Journal of Petroleum Technology 45(9) 866-872. [Pg.1012]

Figure 2-58. Poisson s ratio vs. depth (from Eaton, Fracture Gradient Prediction and Its Application in Oilfield Operations, Journal of Petroleum Technology, October 1969). Figure 2-58. Poisson s ratio vs. depth (from Eaton, Fracture Gradient Prediction and Its Application in Oilfield Operations, Journal of Petroleum Technology, October 1969).
Lubinski, A., Maximum permissible dog-legs in rotary boreholes,"/oj/rnaZ of Petroleum Technology, February 1961. [Pg.1375]

McLean, R. H., Crossflow and impact under jet hits," Journal of Petroleum Technology, November 1964. [Pg.1375]

A. Bringer, D. W., and S. T. Crews, Using large drill collars successfully, Journal of Petroleum Technology, August 1978. [Pg.1375]

Wilson, G. J., An improved method for computing directional surveys, Journal of Petroleum Technology, August 1968. [Pg.1379]

Kendal, H. A., and W. C. Goins, Design and operation of jet-bit programs for maximum hydraulic housepower impact force or Jet e oc ly," Journal of Petroleum Technology, October 1960. [Pg.1380]

Modern Petroleum Technology, Institute of Petroleum, London, 3rd edn (1962)... [Pg.456]

Hobson, G. D. and Pohl, W., (Ed.), Modern Petroleum Technology, Applied Science Publishers, Barking, Essex, England (1973)... [Pg.457]

APT, GC and GC-MS Analysis ofNIGOGA Reference Samples (NSO-1 andJR-Ij, 2 May 2003, Applied Petroleum Technology AS, Kjeller, Norway. [Pg.254]

The extent of fluid loss is dependent on the porosity and thus the permeability of the formation and may reach approximately 10 t/hr. Because the fluids used in petroleum technology are in some cases quite expensive, an extensive fluid loss may not be tolerable. Of course there are also environmental reasons to prevent fluid loss. [Pg.34]

Figure 18.1 Observed versus calculated penetration rate and 95% confidence intervals for well A using the Bourgoyne-Young model [reprinted from the Journal of Canadian Petroleum Technology with permission]. Figure 18.1 Observed versus calculated penetration rate and 95% confidence intervals for well A using the Bourgoyne-Young model [reprinted from the Journal of Canadian Petroleum Technology with permission].
Chappelear, J.E., and Nolen, J.S., "Second Comparative Project A Three Phase Coning Study", Journal of Petroleum Technology, 345-353, March (1986). [Pg.393]

Frick, C.M., Farrel, R.E. and Germida, J.J., Assessment of Phytoremediation as an In-Situ Technique for Cleaning Oil-Contaminated Sites, Petroleum Technology Alliance of Canada, Calgary, AB, 1999. [Pg.568]

Winfrith Petroleum Technology Centre, Winfrith AEE, Dorchester, Dorset,... [Pg.307]

Petroleum supply, world, 48 601 Petroleum system, 48 575 Petroleum technology, sulfur dioxide in, 23 668... [Pg.689]

Bowie, C. R, 1918, Oil-Storage Tanks and Reservoirs with a Brief Discussion of Losses of Oil in Storage and Methods of Prevention U.S. Bureau of Mines Bulletin No. 155, Petroleum Technology Report No. 41, 76 pp. [Pg.13]

Weber, K. J., 1982, Influence of Common Sedimentary Structures on Fluid Flow in Reservoir Models Journal of Petroleum Technology, March, 1982, pp. 665-672. [Pg.88]

Stone, H. L., 1973, Estimation of Three-Phase Relative Permeability and Residual Oil Data Journal of Canadian Petroleum Technology, Vol. 12, No. 4, pp. 53-61. [Pg.166]

Anderson, W. G., 1986a, Wettability Literature Search — Part 2 Rock/Oil/Brine Interactions, and the Effects of Core Handling on Wettability Journal of Petroleum Technology, October, pp. 1125-1149. [Pg.202]

Gentry, R. W., 1972, Decline-Curve Analysis Journal of Petroleum Technology, pp. 38—41. [Pg.350]

See other pages where Petroleum technological is mentioned: [Pg.148]    [Pg.318]    [Pg.49]    [Pg.280]    [Pg.680]    [Pg.1014]    [Pg.316]    [Pg.458]    [Pg.458]    [Pg.458]    [Pg.519]    [Pg.562]    [Pg.165]   
See also in sourсe #XX -- [ Pg.39 ]



SEARCH



Fluid Mixing Technology in the Petroleum Industry

Reviews of Petroleum Technology

Technologies for Petroleum Residue Upgrading

Technologies for Upgrading of Heavy Petroleum

Uses in Petroleum Technology

© 2024 chempedia.info