Dioctyl plasticizer

Property No. Dioctyl Plasticizer Phthalate Dibutoxy Ethoxyethyl Adipate Ether Ester Trioctyl Trimellitate Triisononyl Trimellitate... 

By far the largest volume synthetic alcohol is 2-ethylexanol [104-76-7] CgH gO, used mainly in production of the poly(vinyl chloride) plasticizer bis(2-ethylhexyl) phthalate [117-81-7], commonly called dioctyl phthalate [117-81-7] or DOP (see Plasticizers). A number of other plasticizer... 

Fig. 2. The effect of antimony oxide on the oxygen index of poly(vinyl chloride) plasticized with dioctyl phthalate (DOP), (—...

Raw Materials. PVC is inherently a hard and brittle material and very sensitive to heat it thus must be modified with a variety of plasticizers, stabilizers, and other processing aids to form heat-stable flexible or semiflexible products or with lesser amounts of these processing aids for the manufacture of rigid products (see Vinyl polymers, vinyl chloride polymers). Plasticizer levels used to produce the desired softness and flexibihty in a finished product vary between 25 parts per hundred (pph) parts of PVC for flooring products to about 80—100 pph for apparel products (245). Numerous plasticizers (qv) are commercially available for PVC, although dioctyl phthalate (DOP) is by far the most widely used in industrial appHcations due to its excellent properties and low cost. For example, phosphates provide improved flame resistance, adipate esters enhance low temperature flexibihty, polymeric plasticizers such as glycol adipates and azelates improve the migration resistance, and phthalate esters provide compatibiUty and flexibihty (245). 

Docusate Sodium. Aerosol OT, Colace, and Doxinate are trade names of docusate sodium [577-11-7] (dioctyl sodium sulfo succinate, sodium salt of l,4-bis(2-etliylhexyl)estet butanedioic). This white, wax-like, plastic sohd, with a characteristic odor suggestive of octyl alcohol, is usually available in the form of pellets. One gram of the sodium salt slowly dissolves in about 70 mL water. Docusate sodium is freely soluble in alcohol and glycerol, very... 

Plasticizers. Monomeric (mol wt 250—450) plasticizers (qv) are predominantiy phthalate, adipate, sebacate, phosphate, or trimeUitate esters. Organic phthalate esters like dioctyl phthalate (DOP) are by far the most common plasticizers in flexible PVC. Phthalates are good general-purpose plasticizers which impart good physical and low temperature properties but lack permanence in hot or extractive service conditions and are therefore sometimes called migratory plasticizers. Polymeric plasticizers (mol wt up to 5000 or more) offer an improvement in nonmigratory permanence at a sacrifice in cost, low temperature properties, and processibiHty examples are ethylene vinyl acetate or nitrile polymers. 

Uses. Phthabc anhydride is used mainly in plasticizers, unsaturated polyesters, and alkyd resins (qv). PhthaUc plasticizers consume 54% of the phthahc anhydride in the United States (33). The plasticizers (qv) are used mainly with poly(vinyl chloride) to produce flexible sheet such as wallpaper and upholstery fabric from normally rigid polymers. The plasticizers are of two types diesters of the same monohydric alcohol such as dibutyl phthalate, or mixed esters of two monohydric alcohols. The largest-volume plasticizer is di(2-ethylhexyl) phthalate [117-81-7] which is known commercially as dioctyl phthalate (DOP) and is the base to which other plasticizers are compared. The important phthahc acid esters and thek physical properties are Hsted in Table 12. The demand for phthahc acid in plasticizers is naturally tied to the growth of the flexible poly(vinyl chloride) market which is large and has been growing steadily. 

Di-2-EthylhexylPhthalate. In Western Europe, di-2-ethylhexyl phthalate [117-81-7] (DEHP), also known as dioctyl phthalate (DOP), accounts for about 50% of all plasticizer usage and as such is generally considered as the industry standard. The reason for this is that it is in the mid-range of plasticizer properties. DEHP (or DOP) is the phthalate ester of 2-ethyIhexanol, which is normally manufactured by the dimerization of butyraldehyde (eq. 2), the butyraldehyde itself being synthesized from propylene (see Butyraldehydes). 

Fig. 4. SmaH-angle x-ray scattering pattern from PVC plasticized with 20 parts per hundred resin of dioctyl phthalate (18).

Vehicles are selected by two methods. In one a concentrate is designed directiy for a resin system, the resin itself, or a compatible resin. Thus when the concentrate is made there is a minimal effect on the properties of the final color. In PVC, often a plasticizer such as dioctyl phthalate (DOP) is used. In the other method, concentrates are made with a commercial universal concentrate vehicle. Concentrate manufacturers and some resin manufacturers have developed vehicles that can incorporate many types of colorants and can be used across many classes of polymers without adversely affecting final product performance. 

The polarity of the polyethers makes them incompatible with hydrocarbon-type plasticizers, which tend to bleed. Effective plasticizers are ethers such as di(butoxyethoxyethyl)formal [143-29-3] (Thiokors TP-90B), esters such as di(2-ethylhexyl) phthalate [117-81-7] dioctyl phthalate (DOP), polyesters such as Paraplex G50 (Rohm and Haas), and ether—esters such as di(butoxyethoxyethyl) adipate [114-17-3] (Thiokol s TP-95). The lower mol wt plasticizers, DOP, TP-90B, and TP-95 improve vulcanizate low temperature performance. The polymeric plasticizers maintain higher temperature and long-term aging properties. Epoxidized plasticizers should be avoided because they interfere with vulcanization. 

Kraton Polymers has developed a multiarm SIS (Kraton 1320X [37,46,47,50]) and SBS (Kraton KX-222C, [48,49]) for rapid UV/e-beam cure. Besides heat resistance improvements, plasticizer resistance is also improved in cured rubber-based systems. The dioctyl phthlate plasticizer common in PVC backing films is soluble in the styrenic domains of SBCs. Crosslinking of the mid-block provides cohesion even after plasticizer attack [51]. 

Produced from PVC compounds containing plasticizers such as dioctyl phthalate, this is a flexible sheeting suitable for lining tanks made from steel and concrete. The maximum temperature at which this lining can be used is 60°C. 

Similar results were also reported in [100], As noted earlier, the authors measured the strength of the filler-matrix interaction by the magnitude of the thermal effect the more negative the enthalpy, the greater the interaction. Pure A-175 Aerosil and Aerosils modified with aminophenyl methylene diethoxysilane (AM-2) and butyl alcohol ( Butasil ). The base polymer was PVC plasticized with dioctyl sebacinate. The results are presented in Table 8 below. 

The transesterification of PET with 2-ethylhexanol produces dioctyl terephthalate and small amounts of octyl(2-hydroxyethylene)terephthalate and terephthalate oligoesters. This mixture is used as a plasticizer for polyvinyl chloride.12... 

Dioctyl sebacate (DOS) with relative permittivity e of 3.9 and 2-nitrophenyl octyl ether (NPOE) with e = 23.9 are the traditionally used sensor membrane plasticizers. The choice of a plasticizer always depends on a sensor application. Thus, NPOE appears to be more beneficial for divalent ions due to its higher polarity, but for some cases its lipophilicity is insufficient. Furthermore, measurements with NPOE-plasticized sensors in undiluted blood are complicated by precipitation of charged species (mainly proteins) on the sensor surface, which leads to significant potential drifts. Although calcium selectivity against sodium and potassium for NPOE-based membranes is better by two orders of magnitude compared to DOS membranes, the latter are recommended for blood measurements as their lower polarity prevents protein deposition [92],... 

Addition of a dioctyl phthalate plasticizer (DOP) increases flammability and incompatability of PVC with flame retardants. 

Fig. 18a. 11. Chemical structures of commonly used plasticizers in membranes of ion-selective electrodes. DOS, dioctyl sebacate NPOE, nitrophenyl octyl ether.

In many cases pigment-plasticizer pastes are also used for coloring PVC. Because of the mixing or embrittlement gap in the PVC-plasticizer system, which ranges from 5 to 18% for dioctyl phthalate for example, such pastes have little or no suitability for unplasticized PVC compounds. In this concentration range, which is specific for each plasticizer, no plasticizing effect is achieved, on the contrary the additive causes embrittlement of the PVC. 

In terms of stability to organic solvents, P.Br.23 performs like other red pigments within its class. It is thus somewhat inferior to the yellow products. Regarding fastness to various ketones, esters, and alcohols, as well as to dioctyl phthalate and dibutyl phthalate, P.Br.23 equals step 3 1 and step 4, respectively, on the 5 step scale. P.Br.23 is broad in scope, but its main field of application is in plastics. 

P.V.23, also referred to as Carbazole Violet, is a universally useful product. Its color, a bluish violet shade, is not accessible with other Pigments. P.V.23 is used in almost all media which are typically colored with pigments. The list of suitable systems ranges from coatings and paints to plastics, printing inks, and other special-purpose media. P.V.23 is entirely fast to many organic solvents. At standardized conditions (Sec. 1.6.2.1), it is fast to alcohols, esters, and aliphatic hydrocarbons as well as to plasticizers such as dibutyl and dioctyl phthalate. Other solvents, such as ketones, are colored slightly (step 4). 

---