Diene-aldehyde cycloaddition

On the other hand, hikosamine (284), obtained by degradation of hikizimy-cin (285), was synthesized by the recently developed diene-aldehyde cycloaddition reaction (85JA7762). Hexoaldose 278 was synthesized starting with the Eu(fod)3 (83JA3716) mediated cyclocondensation of furfural (275) with diene... 

Yamamoto and co-workers have introduced a conceptually interesting series of catalysts that incorporate an acidic proton into the active catalyst. Termed Bronsted acid-assisted chiral Lewis acid (BLA), catalyst 14 selectively catalyzes a number of diene-aldehyde cycloadditions reactions (Scheme 16) [67]. While extremely selective for the substrates shown, no aldehydes lacking an a-substitu-ent were reported to be effective in this reaction. This feature was addressed in... 

Diene-aldehyde cycloadditions in which the carbohydrate contains the formyl group were studied at high pressure by Jurczak and co-workers (55). Cycloaddition of 1-methoxybutadiene to aldehyde 59 at 20 kbar and 53° C occurred to give 60 with complete stereoselectivity. When the reaction was carried out at 11 kbar in the presence of Eu(fod)3 as a catalyst, a 98 2 ratio of the cycloadducts was obtained in which 60 was the major product. The diastereoselectivity of the reaction is consistent with a Felkin-Anh transition state in which the diene approaches the formyl group from the less hindered face, in the endo mode. 

The diene-aldehyde cycloaddition has been further developed in the laboratories of Danishefsky and co-workers, where significant advances in methodology have been demonstrated by many successful applications to the synthesis of natur products (56-55). Two examples in which carbohydrate-derived substrates are utilized in the cycloaddition step are the synthesis of octosyl acid A and the synthesis of spectinomycin. In the synthesis of octosyl acid A (Scheme 9), Danishefsky s diene reacted with aldehyde 61 to give 62 in 85% yield (59). The stereoselectivity of the addition to 61 was that predicted by Cram s rule. For the synthesis of spectinomycin, cycloaddition of diene 64 to acetaldehyde occurred in the presence of Eu(fod)3 to give a 5.7 1 mixture of two products. The major diastereomer was the one desired for the spectinomycin synthesis 40),... 

A particularly elegant example is the application of Danishefsky s diene [107] to the total synthesis of carbohydrates and carbohydrate derivatives. While it was known that activated aldehydes undergo cycloaddition with electron-rich dienes, the process was not efficient with typical aldehydes under thermal conditions. A major breakthrough was realized [108] with the development of the Lewis acid-catalyzed diene-aldehyde cyclocondensation (LACDAC) reaction, which provided a new strategy for the synthesis of carbohydrates and other polyoxygenated natural products (Scheme 1.4) [109],... 

Woo, S., Squires, N., Fallis, A. G. Indium-mediated "i-pentadienyla-tion of aldehydes and ketones cross-conjugated trienes for diene-transmissive cycloadditions. Org. Lett. 1999,1, 573—575. 

Recently, an a-oxoquinodimethane has been used as a highly reactive diene in cycloadditions with simple aromatic aldehydes [Eq. (16)].47... 

Of course, the carbonyl group is involved in the reactivity of unsaturated ketones or aldehydes toward dienes in cycloaddition pathways. Aqueous hetero Diels-Alder reactions of activated carbonyl compounds have also been reported, and are extensively described elsewhere in this book. 

The [ 2 + 4]-cycloaddition reaction of aldehydes and ketones with 1,3-dienes is a well-established synthetic procedure for the preparation of dihydropyrans which are attractive substrates for the synthesis of carbohydrates and other natural products [2]. Carbonyl compounds are usually of limited reactivity in cycloaddition reactions with dienes, because only electron-deficient carbonyl groups, as in glyoxy-lates, chloral, ketomalonate, 1,2,3-triketones, and related compounds, react with dienes which have electron-donating groups. The use of Lewis acids as catalysts for cycloaddition reactions of carbonyl compounds has, however, led to a new era for this class of reactions in synthetic organic chemistry. In particular, the application of chiral Lewis acid catalysts has provided new opportunities for enantioselec-tive cycloadditions of carbonyl compounds. 

Yamamoto et al. were probably the first to report that chiral aluminum(III) catalysts are effective in the cycloaddition reactions of aldehydes [11]. The use of chiral BINOL-AlMe complexes (R)-S was found to be highly effective in the cycloaddition reaction of a variety of aldehydes with activated Danishefsky-type dienes. The reaction of benzaldehyde la with Danishefsky s diene 2a and traws-l-methoxy-2-methyl-3-(trimethylsilyloxy)-l,3-pentadiene 2b affords cis dihydropyrones, cis-3, as the major product in high yield with up to 97% ee (Scheme 4.6). The choice of the bulky triarylsilyl moiety in catalyst (J )-8b is crucial for high yield and the en-antioselectivity of the reaction in contrast with this the catalysts derived from AlMe3 and (J )-3,3 -disubstituted binaphthol (substituent = H, Me, Ph) were effective in stoichiometric amounts only and were less satisfactory with regard to reactivity and enantioselectivity. 

A series of chiral binaphthyl ligands in combination with AlMe3 has been used for the cycloaddition reaction of enamide aldehydes with Danishefsky s diene for the enantioselective synthesis of a chiral amino dihydroxy molecule [15]. The cycloaddition reaction, which was found to proceed via a Mukaiyama aldol condensation followed by a cyclization, gives the cycloaddition product in up to 60% yield and 78% ee. 

Chiral boron(III) Lewis acid catalysts have also been used for enantioselective cycloaddition reactions of carbonyl compounds [17]. The chiral acyloxylborane catalysts 9a-9d, which are also efficient catalysts for asymmetric Diels-Alder reactions [17, 18], can also catalyze highly enantioselective cycloaddition reactions of aldehydes with activated dienes. The arylboron catalysts 9b-9c which are air- and moisture-stable have been shown by Yamamoto et al. to induce excellent chiral induction in the cycloaddition reaction between, e.g., benzaldehyde and Danishefsky s dienes such as 2b with up to 95% yield and 97% ee of the cycloaddition product CIS-3b (Scheme 4.9) [17]. 

Keck et al. reported that a catalyst generated from (S)- or (l )-BINOL 12 and Ti(0-i-Pr)4 in a 2 1 ratio is more selective than the catalyst formed from a 1 1 mixture [19fj. The former catalyst was shown to catalyze the cycloaddition reaction of aldehydes 1 with Danishefsky s diene 2a affording the dihydropyrones 3 with moderate to excellent enantioselectivity (Scheme 4.12). The reaction proceeds well for different aldehydes with up to 97% ee and good yield of the cycloaddition products. 

A chiral vanadium complex, bis(3-(heptafluorobutyryl)camphorato)oxovana-dium(IV), can catalyze the cycloaddition reaction of, mainly, benzaldehyde with dienes of the Danishefsky type with moderate to good enantioselectivity [21]. A thorough investigation was performed with benzaldehyde and different activated dienes, and reactions involving double stereo differentiation using a chiral aldehyde. 

Chiral salen chromium and cobalt complexes have been shown by Jacobsen et al. to catalyze an enantioselective cycloaddition reaction of carbonyl compounds with dienes [22]. The cycloaddition reaction of different aldehydes 1 containing aromatic, aliphatic, and conjugated substituents with Danishefsky s diene 2a catalyzed by the chiral salen-chromium(III) complexes 14a,b proceeds in up to 98% yield and with moderate to high ee (Scheme 4.14). It was found that the presence of oven-dried powdered 4 A molecular sieves led to increased yield and enantioselectivity. The lowest ee (62% ee, catalyst 14b) was obtained for hexanal and the highest (93% ee, catalyst 14a) was obtained for cyclohexyl aldehyde. The mechanism of the cycloaddition reaction was investigated in terms of a traditional cycloaddition, or formation of the cycloaddition product via a Mukaiyama aldol-reaction path. In the presence of the chiral salen-chromium(III) catalyst system NMR spectroscopy of the crude reaction mixture of the reaction of benzaldehyde with Danishefsky s diene revealed the exclusive presence of the cycloaddition-pathway product. The Mukaiyama aldol condensation product was prepared independently and subjected to the conditions of the chiral salen-chromium(III)-catalyzed reactions. No detectable cycloaddition product could be observed. These results point towards a [2-i-4]-cydoaddition mechanism. 

Danishefsky et al. were probably the first to observe that lanthanide complexes can catalyze the cycloaddition reaction of aldehydes with activated dienes [24]. The reaction of benzaldehyde la with activated conjugated dienes such as 2d was found to be catalyzed by Eu(hfc)3 16 giving up to 58% ee (Scheme 4.16). The ee of the cycloaddition products for other substrates was in the range 20-40% with 1 mol% loading of 16. Catalyst 16 has also been used for diastereoselective cycloaddition reactions using chiral 0-menthoxy-activated dienes derived from (-)-menthol, giving up to 84% de [24b,c] it has also been used for the synthesis of optically pure saccharides. 

Different main-group-, transition- and lanthanide-metal complexes can catalyze the cycloaddition reaction of activated aldehydes with activated and non-activated dienes. The chiral metal complexes which can catalyze these reactions include complexes which enable substrates to coordinate in a mono- or bidentate fashion. 

Few investigations have included chiral lanthanide complexes as catalysts for cycloaddition reactions of activated aldehydes [42]. The reaction of tert-butyl glyoxylate with Danishefsky s diene gave the expected cycloaddition product in up to 88% yield and 66% ee when a chiral yttrium bis-trifluoromethanesulfonylamide complex was used as the catalyst. 

The major developments of catalytic enantioselective cycloaddition reactions of carbonyl compounds with conjugated dienes have been presented. A variety of chiral catalysts is available for the different types of carbonyl compound. For unactivated aldehydes chiral catalysts such as BINOL-aluminum(III), BINOL-tita-nium(IV), acyloxylborane(III), and tridentate Schiff base chromium(III) complexes can catalyze highly diastereo- and enantioselective cycloaddition reactions. The mechanism of these reactions can be a stepwise pathway via a Mukaiyama aldol intermediate or a concerted mechanism. For a-dicarbonyl compounds, which can coordinate to the chiral catalyst in a bidentate fashion, the chiral BOX-copper(II)... 

Selenoaldehydes 104, like thioaldehydes, have also been generated in situ from acetals and then directly trapped with dienes, thus offering a useful one-pot procedure for preparing cyclic seleno-compounds [103,104], The construction of a carbon-selenium double bond was achieved by reacting acetal derivatives with dimethylaluminum selenide (Equation 2.30). Cycloadditions of seleno aldehydes occur even at 0 °C. In these reactions, however, the carbon-selenium bond formed by the nucleophilic attack of the electronegative selenium atom in 105 to the aluminum-coordinated acetal carbon, may require a high reaction temperature [103], The cycloaddition with cyclopentadiene preferentially gave the kinetically favorable endo isomer. 

Supported Lewis acids are an interesting class of catalysts because of their operational simplicity, filterability and reusability. The polymer-bound iron Lewis-acid 53 (Figure 3.8) has been found [52] to be active in the cycloadditions of a, S-unsaturated aldehydes with several dienes. It has been prepared from (ri -vinylcyclopentadienyl)dicarbonylmethyliron which was copolymerized with divinylbenzene and then treated with trimethylsilyltriflate followed by THF. Some results of the Diels-Alder reactions of acrolein and crotonaldehyde with isoprene (2) and 2,3-dimethylbutadiene (4) are summarized in Equation 3.13. 

Binaphthol-derived titanium complexes [64], prepared from chiral ligands 65 (Figure 3.13), also performed very well in the cycloadditions of conjugated aldehydes with cyclic and acyclic dienes. Judging from the absolute configurations of endo and exo adducts, this catalyst should cover the re-face of carbonyl on its u tz-coordination to s-trans a,/l-unsaturated aldehydes, and hence dienes should approach selectively from the si-face. 

The aqueous aza-Diels-Alder reaction of an aldehyde and an amine hydrochloride with a diene is catalyzed by lanthanide(III) trifluoromethane sulfonates (Ln(OTf)3, triflates [24]). Some examples are reported in Schemes 6.12 and 6.13. With respect to uncatalyzed reactions, the lanthanide catalyst allows milder reaction conditions, increases the reaction yield and does not affect the diaster-eoselectivity of the reaction, but influences the regiochemistry as in the cycloaddition of 25 with 1,3-dimethyl-1,3-butadiene (Schemes 6.10 and 6.12). These results have been applied [24b-d] to the synthesis of azasugars (Scheme 6.14). 

Secondary orbital interactions (SOI) (Fig. 2) [5] between the non-reacting centers have been proposed to determine selectivities. For example, cyclopentadiene undergoes a cycloaddition reaction with acrolein 1 at 25 °C to give a norbomene derivative (Fig. 2a) [6]. The endo adduct (74.4%) was preferred over the exo adduct (25.6%). This endo selectivity has been interpreted in terms of the in-phase relation between the HOMO of the diene at the 2-position and the LUMO at the carbonyl carbon in the case of the endo approach (Fig. 2c). An unfavorable SOI (Fig. 2d) has also been reported for the cycloaddition of cyclopentadiene and acetylenic aldehyde 2 and its derivatives (Fig. 2b) [7-9]. The exo-TS has been proposed to be favored over the endo- IS. 

The homoallylation product 16a presumably stems from oxidative cycloaddition of a Ni(0) species across the diene and aldehyde moieties of 15, leading to an oxanickellacycle intermediate 17 (path A, Scheme 5), which undergoes 0-bond metathesis with triethylsilane giving rise to a o-allylnickel 19. On the other hand, formation of 16b may start with addition of a Ni - H species upon the diene followed by intramolecular nucleophilic allylation as described in Eqs. 4-6 (path B). Alternatively, allylic transposition of the NiH group providing 20 from 19 may be related to the formation of 16b. The different reactivity between cyclohexadiene and many other acyclic dienes is also observed for the reaction undertaken under typical homoallylation conditions (see Scheme 14). 

Trapping reactions of benzoylmethyleneoxophosphorane 39 a with carbonyl compounds dispel any remaining doubts as to the existence of acylated phosphenes. Unlike the diphenylmethyleneoxophosphorane 9, whose P/C double bond participates in cycloadditions, compound 39 a acts as a hetero-1,3-diene and undergoes [4 + 2]-cycloaddition with aldehydes and ketones 10 I7,35> it may again be assumed that the reaction is a two-step process involving 55 as intermediate. 

In 1987, Vaultier and coworkers [27] developed a combination of a [4+2] cycloaddition of a bora-1,3-diene to provide an allylborane, which then reacts with an aldehyde to give a highly functionalized alcohol. The Lallemand group, as well as Hall and colleagues, has recently used this procedure. In an approach for the synthesis of the antifeedant natural product clerodin (4-83), Lallemand and coworkers performed a three-component domino reaction of 4-80, 4-81 and methyl acrylate to give 4-82 (Scheme 4.18) [28]. 

Examples of the use of heterodienophiles under the action of microwave irradiation are not common. Soufiaoui [84] and Garrigues [37] used carbonyl compounds as die-nophiles. The first example employed solvent-free conditions the second is an example of the use of graphite as a susceptor. Cycloaddition of a carbonyl compound provided a 5,6-dihydro-2H-pyran derivative. These types of reaction proceed poorly with aliphatic and aromatic aldehydes and ketones unless highly reactive dienes and/or Lewis acid catalysts are used. Reaction of 2,3-dimethyl-l,3-butadiene (31) with ethyl glyoxylate (112) occurred in 75% yield in 20 min under the action of microwave irradiation. When conventional heating is used it is necessary to heat the mixture at 150 °C for 4 h in a sealed tube to obtain a satisfactory yield (Scheme 9.33). 

The mode of reaction of titanacydobutenes with carbonyl compounds is largely dependent on steric factors (Scheme 14.31) [72]. Ketones and aldehydes tend to insert into the titanium—alkyl bond of 2,3-diphenyltitanacydobutene, and homoallylic alcohols 70 are obtained by hydrolysis of the adducts 71 [65a,73]. On the contrary, when dialkyl-substi-tuted titanacydobutenes are employed, the reaction with aldehydes preferentially proceeds through insertion into the titanium—vinyl bond. Thermal decomposition of the adducts 72 affords conjugated dienes 73 with E-stereoselectivity as a result of a concerted retro [4+2] cycloaddition [72]. 

---