Cycloaddition reaction diastereoselective

Danishefsky et al. were probably the first to observe that lanthanide complexes can catalyze the cycloaddition reaction of aldehydes with activated dienes [24]. The reaction of benzaldehyde la with activated conjugated dienes such as 2d was found to be catalyzed by Eu(hfc)3 16 giving up to 58% ee (Scheme 4.16). The ee of the cycloaddition products for other substrates was in the range 20-40% with 1 mol% loading of 16. Catalyst 16 has also been used for diastereoselective cycloaddition reactions using chiral 0-menthoxy-activated dienes derived from (-)-menthol, giving up to 84% de [24b,c] it has also been used for the synthesis of optically pure saccharides. 

Acetylenic ethers 7 can be hydrozirconated, and subsequent iododezirconation leads to (fc)-iodo enol ethers 8 (Scheme 4.4) [18], These species undergo efficient Sonogashira couplings to give (E)-enynes, which are ultimately converted to stereodefined dienol ethers. These dienes have proven useful in studies of diastereoselective cycloaddition reactions with singlet oxygen, where R in 8 is a nonracemic auxiliary (e. g., menthyl) (Procedure 3, p. 140). 

Table 10. Diastereoselective Cycloaddition Reactions of Danishefsky s Diene with 2-Formyl-2-methyl-1,3-dithiane 1 -Oxide...

Treatment of r -(EBIH)ZrMe2 954 with [HNMe3]Cl yields the chlorozirconocene methyl derivative rac-(EBIH)Zr(Cl)Me 955, which is subsequently treated with LiHNAr in THF to afford the imido complex r -(EBIH)Zr(=NAr)(THF)2 956727 (Scheme 240). This racemic imido complex undergoes highly diastereoselective cycloadditions reactions with 1 equiv. of racemic disubstituted allenes to yield single diastereomeric azametallacycle products 957. The use of the enantiopure zirconocene imido complex... 

A related approach to the generation of intermediate o-quinodimethanes is showcased in a synthesis by Saegusa (Equation 6) [58]. Treatment of 95 with fluoride led to 1,4-elimination and formation of quinone methide 96. This reactive intermediate participated in a diastereoselective cycloaddition reaction to furnish estrone methyl ether (97) as a single diastereomer in 86% yield. 

Methacrylates have also found use in diastereoselective -ene reactions. Although not a cycloaddition reaction, this reaction is mechanistically related to the Diels-Alder reaction (37). 

Whereas there are numerous examples of the application of the products from diastereoselective 1,3-dipolar cycloaddition reaction in synthesis [7, 8], there are only very few examples on the application of the products from metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction in the synthesis of potential target molecules. The reason for this may be due to the fact that most metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction have been carried out on model systems that have not been optimized for further derivatization. One exception of this is the synthesis of a / -lactam by Kobayashi and Kawamura [84]. The isoxazoli-dine endo-21h, which was obtained in 96% ee from the Yb(OTf)3-BINOL-catalyzed... 

There has been some investigation of auxiliary-controlled cycloadditions of azir-ines. Thus, camphor-derived azirine esters undergo cycloaddition with dienes, with poor diastereoselectivity [70]. The same azirines were also observed to react unselectively with phenylmagnesium bromide. Better selectivities were obtained when Lewis acids were used in the corresponding cycloaddition reactions of 8-phe-nylmenthyl esters of azirine 2-carboxylates (Scheme 4.48) [71]. The same report also describes the use of asymmetric Lewis acids in similar cycloadditions, but mediocre ees were observed. 

Alkenylcarbene complexes react with in situ-generated iodomethyllithium or dibromomethyllithium, at low temperature, to produce cydopropylcarbene complexes in a formal [2C+1S] cycloaddition reaction. This reaction is highly diastereoselective and the use of chiral alkenylcarbene complexes derived from (-)-8-phenylmenthol has allowed the enantioselective synthesis of highly interesting 1,2-disubstituted and 1,2,3-trisubstituted cyclopropane derivatives [31] (Scheme 9). As in the precedent example, this reaction is supposed to proceed through an initial 1,4-addition of the corresponding halomethyllithium derivative to the alkenylcarbene complex, followed by a spontaneous y-elimi-nation of lithium halide to produce the final cydopropylcarbene complexes. 

Another example of a [2s+2sh-1c+1co] cycloaddition reaction was observed by Barluenga et al. in the sequential coupling reaction of a Fischer carbene complex, a ketone enolate and allylmagnesium bromide [120]. This reaction produces cyclopentanol derivatives in a [2S+2SH-1C] cycloaddition process when -substituted lithium enolates are used (see Sect. 3.1). However, the analogous reaction with /J-unsubstituted lithium enolates leads to the diastereoselective synthesis of 1,3,3,5-tetrasubstituted cyclohexane- 1,4-diols. The ring skeleton of these compounds combines the carbene ligand, the enolate framework, two carbons of the allyl unit and a carbonyl ligand. Overall, the process can be considered as a for-... 

Cycloaddition reactions of the simple alkyl and aryl aldehydes 65 with (E)-l-methoxy-1,3-butadiene (18b) under high pressure conditions afforded adducts 66 and 67 in reasonable to good yields [2g, 23]. A marked preference for the c applying pressure enforces cnJo-addition (Scheme 5.5). Using mild Lewis-acid catalysts [24], such as Eu(fod)3, Yb(fod)3, or Eu(hfc)3, in combination with pressure, allows good results to be obtained with the added advantage of reducing the pressure to 10 kbar [25] (Scheme 5.5). 

Both ( )-l-phenylsulfonyl and (5)-(+)-3-p-tolylsulfmyl -alk-3-en-2-ones can exhibit high diastereoselectivity in their reactions with vinyl ethers and styrenes, with the dienophile having a dominant influence on the stereochemical outcome <96T1205,96TL3687>. Indol-2-ylideneacetic acid esters can act as both dienophile and heterodiene in cycloaddition reactions in the latter case pyrano[3,2-h]indoles are formed <96SYN519>. 

Cyclopropyl ketones 32 and cyclopropyl imines 33 can also undergo [3+2] cycloaddition reactions with enones 34 in presence of NHC-Ni complexes to afford the corresponding cyclopentane compounds 35 (Scheme 5.9) [11]. The catalytic system is prepared in situ from the use of [Ni(COD),], SIPr HCl salt and KOBu, the reaction also required the use of Ti(O Bu) as an additive to improve yields and increase reactions rates. In most of the cases, th products 35 were obtained in good to excellent diastereoselectivities. 

The following cycloaddition reactions involve chiral auxiliaries and proceed with a good degree of diastereoselectivity. Provide a rationalization of the formation of the preferred product on the basis of a TS. 

As expected, other enol ethers work well in these procedures. For example, Jones and Selenski find that implementation of method F, which occurs by addition of MeMgBr to benzaldehyde 5 in the presence of dihydropyran (DHP) at 78 °C affords a 66% yield of the corresponding tricyclic ketal 59 with better than 50 1 endo diastereoselectivity (Fig. 4.31).27 On the contrary, Lindsey reports use of method H with the benzyl alcohol 35 and diethylketene acetal. The cycloaddition reaction occurs almost instantaneously upon deprotonation of the benzyl alcohol 35 by f-butyl-magnesium bromide in the presence of the ketene acetal and yields the corresponding benzopyran ortho ester 60 in a 67% yield.29... 

Several enamines also participate in these cycloaddition reactions. For example, the addition of methyl lithium to benzaldehyde 5 and the sequential introduction of the vinylogous amide and magnesium bromide results in the cycloaddition elimination product chromene 63 (method G, Fig. 4.33).27 The introduction of methyl magnesium bromide to a solution of the benzaldehyde 5 and two equivalents of the morpholine enamine produces the cycloadduct 64 in 70% yield with better than 50 1 diastereoselectivity (method F). Less reactive enamides, such as that used by Ohwada in Fig. 4.4, however, fail to participate in these conditions. 

High levels of asymmetric induction (97-74% ee) along with high diastereoselectivity (>99 1-64 36) were reported for asymmetric 1,3-dipolar cycloaddition reactions of fused azomethine imines 315 and 3-acryloyl-2-oxazolidinone 709 leading to 711 using a chiral BINIM-Ni(n) complex 710 as a chiral Lewis acid catalyst (Equation 100) <20070L97>. 

Studies of the intramolecular cyclization of P-amino acids have included the use of camphor-derived oxazoline A-oxide 66 and a [3+2] cycloaddition reaction as a step in the formation of the amino acid with the required stereochemistry <00OL1053, OOEJOC1595>. A diastereoselective synthesis of a ip-methylcarbapenem intermediate utilises a cyclization of a P-amino acid <99CC2365>. 

Cycloaddition of 2-alkoxy-l,3-butadienes, H2C=C(OAlk)CH=CH2, and nitrile oxides to give isoxazolines 51 proceeds with the participation of only one of the conjugated C=C bonds. With benzonitrile oxide, only the vinyl group in alkoxydienes participates in cycloaddition reactions while in the case of phenyl-glyoxylonitrile oxide both double bonds react (222). Nitrile oxides RC=NO react with iron complexed trienes 52. The reaction proceeds with good yield and diastereoselectivity ( 90/10) to give isoxazolines 53 (223). 

A strategy based on the diastereoselective dipolar cycloaddition reaction of nitrile oxides and allylic alcoholates, has been applied to the synthesis of bis-(isoxazolines) that are precursors to polyketide fragments. These intermediates can be elaborated into protected polyols, for example, 439, by sequential chemos-elective reductive opening of each isoxazoline or, alternatively, by simultaneously, providing access to all stereoisomers of this carbon skeleton (479). 

The stereoselectivity of these cycloaddition reactions is influenced by the steric hindrance of both, the IV- and C -substituent of the nitrone, that is, the selectivity increases as the nitrogen substituent of the nitrone becomes bulkier. As shown in Table 2.17, the highest diastereoselectivity in these reactions was observed with A-benzyl nitrones (479b) and (480). 

Cycloaddition reactions of vinyl trimethylsilane with C -glycosyl nitrones gave moderate to good yields (67%-74%). Estimation of diastereoselectivities from isolated yields showed total endo preference for the reaction of the D-galacto nitrone. High endo preference was observed for the D-ribo analog, but exo preference for the D-xylo one (814). 

The [4+ 4]-cycloaddition reaction of tethered bis-dienes has been used by Wender and co-workers in total synthesis as exemplified in syntheses of ( )-salsolene oxide and (-l-)-asteriscanolide (Scheme 28). In the synthesis of ( )-salsolene oxide, a nickel(0)-catalyst cleanly effects the cycloaddition of the two conjugated dienes in compound 93 to afford the bicyclo[5.3.1]undecadiene in a good yield and with moderate selectivity.99 The first synthesis of (-l-)-asteriscanolide was accomplished in only 13 steps. The key [4+ 4]-cycloaddition reaction efficiently set the requisite eight-membered ring of (-l-)-asteriscanolide in good yield and with excellent diastereoselectivity.100 The diastereoselective [4 + 4]-cycloaddition has also been applied to the synthesis of the core ring system found in several sesterterpenes such as the ophiobolins (Scheme 28).101... 

Jprgensen and co-workers (247) investigated the asymmetric 1,3-dipolar cycloaddition reaction catalyzed by bis(oxazoline)-copper(II) complexes. In the presence of 25 mol% 269c, nitrone (401) reacts with ethyl vinyl ether and methoxypropene to afford the [3 + 2] adducts in modest diastereoselectivity and high enantioselectivity, Eq. 217. Ethyl vinyl ether preferentially forms the exo adduct while methoxypropene prefers the endo mode for reasons that are unclear. 

---