Cyclic acid anhydrides maleic

Cyclic acid anhydrides such as maleic, dodecylsuccinic, hexahydrophthalic, phthalic, phyromellitic, etc. are widely employed as curing agents for epoxy resins. They form esters with epoxy resins. These resins have better thermal stability and good electrical insulation and chemical resistance expect to alkalis. 

The unlikely molecule in Figure 20—1 is a cyclic anhydride known by several names 2-butene-1,4-dicarboxylic acid anhydride cis-butene-dioic acid anhydride maleic anhydride (MA) and when youVe been in the business a long time, maleic. ... 

Potassium carboxylate groups introduced onto the surface of carbon fibers initiated anionic polymerization of epoxides (e.g., styrene oxide, epichlorohydrin, and glycidyl phenyl ethers) and cyclic acid anhydrides (e.g., maleic anhydride, succinic anhydride, and phthalic anhydride) in the presence of 18-crown-6 [41]. 

The tendency towards alternation in the oxirane/cyclic acid anhydride system with the zinc-based coordination catalyst is connected, according to literature data [193], with the stronger nucleophilic properties of the oxygen atom of the zinc alcoholate species and the weaker electrophilic properties of the zinc atom in such species compared with the respective properties of zinc carboxylate species. Studies of the copolymerisation of propylene oxide and maleic anhydride in the presence of catalysts such as diethylzinc-monoprotic compound (1 1) showed an increasing tendency towards alternation in systems with catalysts of decreasing electrophilicity of the zinc atom [186], which may corroborate the coordination mechanism proposed scheme (24). 

Figure 2. Effect of cyclic acid anhydride concentration on the modification of e-NH2 groups in the yeast proteins maleic anhydride (O) citraconic anhydride (%).

Cyclic acid anhydrides are widely employed as curing agents for epoxy resins. Both mono- and dianhydrides are used. Examples of anhydrides which find application are maleic anhydride (MA) (XIX), dodecenylsuccinic anhydride (DDSA) (XX), hexahydrophthalic anhydride (HPA) (XXI), phthalic anhydride (PA) (30(11), pyromellitic dianhydride MDA) (XXIII), nadic methyl anhydride (NMA) (a mixture of maleic anhydride adducts of methylcyclopentadienes cf.. Section 10.2.2.3) (XXIV) and chlorendic (HET) anhydride (XXV see also Section 102.2.3). 

Finally, the catalytic activity of DMCs in esterification reactions can be readily combined with their catalytic activity in epoxide ring-opening polymerizations, as was reported by Suh et al. [35]. This study showed that the copolymerization of propylene oxide with cyclic acid anhydrides such as succinic, maleic, or phthalic anhydride, catalyzed by a Zn-Co-DMC, afforded polyester polyols characterized by a moderate molecular weight and narrow polydispersity index. 

After acyl halides acid anhydrides are the most reactive carboxylic acid derivatives Three of them acetic anhydride phthahc anhydride and maleic anhydride are mdus trial chemicals and are encountered far more often than others Phthahc anhydride and maleic anhydride have their anhydride function incorporated into a nng and are referred to as cyclic anhydrides... 

In an alkene such as ethene, the presence of the 7t-bond prevents rotation about the C=C bond. The hydrogen atoms on the separate carbons are either cis or trans to each other. When the alkene bears substituents on the separate carbon atoms, these are cis or trans to each other. Distinct geometric isomers are possible. These compounds have different properties. Thus c -ethenedicarboxylic acid is maleic acid (1.23). The carboxyl groups are close together in space and react together to form a cyclic anhydride (1.24). On the other hand, tranj-ethenedicarboxylic acid is fumaric acid (1.25) and no such interaction is possible. 

Miladinov et al. reported the preparation of starch-fatty acid esters by reactive extrusion of plasticized starch and acid anhydrides (acetic, propionic, heptanoic and palmitic anhydrides) in the presence of sodium hydroxide as a catalyst [87]. Starch esters have been prepared by REX using maleic anhydride (MA) as a cyclic dibasic acid anhydride in the presence of 20 wt% glycerol as plasticizer. This material was melt-blended with biodegradable polyester. 

Cyclic anhydrides such as succinic anhydride, maleic anhydride, and glutaric anhydride can be prepared by heating the corresponding dicarboxylic acids. The reaction results in intramolecular dehydration and ring formation. Study the following example. 

Also, in 1999, Mitsubishi Chemical Corporation discovered that the addition of cyclic carboxylic acid anhydrides, such as succinic anhydride (18) and maleic anhydride (19), suppresses the decomposition of PC even when graphite anodes are used [56],... 

Synthesis of Derivatives of Carboxylic Acids.—Dicarboxylic acid di-iodides are prepared (in 37 to 94% yield) from the corresponding diacid chlorides and sodium iodide. Carboxylic acid bromides are prepared under neutral conditions by the reaction of the corresponding acid with dibromotriphenylphosphorane. Radicals generated from cyclohexylmercuric acetate and NaBH4 react with maleic anhydride and related compounds to give cyclic derivatives of maleic acid in 55 to 98% yield. The chemistry of acyl cyanides has been reviewed. ... 

COT is prepared by the polymerization of ethyne at moderate temperature and pressure in the presence of nickel salts. The molecule is non-planar and behaves as a typical cyclic olefin, having no aromatic properties. It may be catalytically hydrogenated to cyclo-octene, but with Zn and dil. sulphuric acid gives 1,3,6-cyclooclairiene. It reacts with maleic anhydride to give an adduct, m.p. 166 C, derived from the isomeric structure bicyclo-4,2,0-octa-2,4,7-triene(I) ... 

Even the earliest reports discuss the use of components such as polymer syrups bearing carboxylic acid functionality as a minor component to improve adhesion [21]. Later, methacrylic acid was specifically added to adhesive compositions to increase the rate of cure [22]. Maleic acid (or dibasic acids capable of cyclic tautomerism) have also been reported to increase both cure rate and bond strength [23]. Maleic acid has also been reported to improve adhesion to polymeric substrates such as Nylon and epoxies [24]. Adducts of 2-hydroxyethyl methacrylate and various anhydrides (such as phthalic) have also been reported as acid-bearing monomers [25]. Organic acids have a specific role in the cure of some blocked organoboranes, as will be discussed later. 

The classic method for controlling stereochemistry is to perform reactions on cyclic substrates. A rather lengthy but nonetheless efficient example in the prostaglandin field uses bicyclic structures for this purpose. Bisacetic acid derivative S is available in five steps from Diels-Alder reaction of trans-piperylene and maleic anhydride followed by side-chain homologation. Bromolactonization locks the molecule as bicyclic intermediate Esterification, reductive dehalogen-... 

Maleic acid is a linear four carbon molecule with carboxylate groups on both ends and a double bond between the central carbon atoms. The anhydride of maleic acid is a cyclic molecule containing five atoms. Although the reactivity of maleic anhydride is similar to other cyclic anhydrides, the products of maleylation are much more unstable toward hydrolysis, and the site of unsaturation lends itself to additional side reactions. Acylation products of amino groups with maleic anhydride are stable at neutral pH and above, but they readily hydrolyze at acid pH values around pH 3.5 (Butler et al., 1967). Maleylation of sulfhydryls and the phe-nolate of tyrosine are even more sensitive to hydrolysis. Thus, maleic anhydride is an excellent reversible blocker of amino groups to temporarily mask them from reactivity while another... 

Microwave heating has also been employed for performing retro-Diels-Alder cycloaddition reactions, as exemplified in Scheme 6.94. In the context of preparing optically pure cross-conjugated cydopentadienones as precursors to arachidonic acid derivatives, Evans, Eddolls, and coworkers performed microwave-mediated Lewis acid-catalyzed retro-Diels-Alder reactions of suitable exo-cyclic enone building blocks [193, 194], The microwave-mediated transformations were performed in dichloromethane at 60-100 °C with 0.5 equivalents of methylaluminum dichloride as catalyst and 5 equivalents of maleic anhydride as cyclopentadiene trap. In most cases, the reaction was stopped after 30 min since continued irradiation eroded the product yields. The use of short bursts of microwave irradiation minimized doublebond isomerization. 

Crosslinking of amine- or hydroxy-terminated PAMAM dendrimers using cyclic anhydride - amine or cyclic anhydride - hydroxy addition reactions was employed for preparation of crosslinked thin films of very low permeability [73], Polyanhydrides, such as maleic anhydride-methyl vinyl ether copolymers, were used as crosslinking components. In the case of amine-terminated PAMAM, crosslinking and chemical stability were further increased by imidization of the maleamic acid groups retro-Michael eliminations were followed by Michael additions to further crosslink the film. 

Maleic anhydride is a cyclic anhydride with one double bond in the ring and two double-bonded oxygens hanging off the ring. The resulting reactivity leads to maleics use in making polymers, unsaturated polyesters, alkyd resins, plasticizers, and dicarboxylic acids. 

The diacylation of isopropenyl acetate with anhydrides of dicarboxylic acids is applicable for the synthesis of several other cyclic jS-triketones in moderate yield. - It has been used for the synthesis of 2-acetylcyclohexane-l,3-dione (40% yield), 2-acetyl-4-methylcyclopentane-l,3-dione (10% yield), 2-acetyl-4,4-dimethylcyclopentane-l,3-dione (10% yield), 2-acetyl-5,5-dimethylcyclohexane-l,3-dione (10% yield), 2-acetylcyclo-heptane-l,3-dione (12% yield) and 2-acetylindane-l,3-dione (26% yield). Maleic anhydrides under more drastic conditions give acetylcyclopent-4-ene-l,3-diones in yields from 5% to 12%. The corresponding acylation of the enol acetate of 2-butanone with succinic anhydride has been used to prepare 2-methylcyclopentane-l,3-dione, an important intermediate in steroid synthesis. - ... 

Butanedioic and pentanedioic acids take a different course. Rather than form the strained cyclic ketones, cyclopropanone and cyclobutanone, both acids form cyclic anhydrides that have five- and six-membered rings, respectively. 1,2-Benzenedicarboxylic (phthalic) and cis-, 4-butenedicar-boxylic (maleic) acids behave similarly ... 

Alder s endo rule applies not only to cyclic dienes like cyclopentadiene and to disubstituted dienophiles like maleic anhydride, but also to open chain dienes and to mo no-substituted dienophiles diphenylbutadiene and acrylic acid, for example, react by way of an endo transition structure 2.113 to give largely (9 1) the adduct 2,114 with all the substituents on the cyclohexene ring cis, and equilibration again leads to the minor isomer 2.115 with the carboxyl group trans to the two phenyl groups. 

Monoesters of symmetric dicarboxylic acids can be prepared either by monoesterification of a diacid [1] or by monosaponification of a diester. Dicarboxylic acids which can form five- or six-membered cyclic anhydrides are readily transformed into monoesters via these intermediates, but for diacids which cannot be converted into such cyclic anhydrides monosaponification of diesters seems to be more reliable than selective monoesterification. Monoesters or monoamides of succinic, maleic, glutaric, or related diacids can be rather unstable, because of the dose proximity of a carboxyl group (see Section 3.3). 

---