Complexes, catalytic properties

Halpern J, Riley D P, Chan A S C and Pluth J J 1977 Novel coordination chemistry and catalytic properties of cationic 1,2-bis(diphenylphosphino)ethanerhodium(l) complexes J. Am. Chem. Soo. 99 8055-7... 

Zirconium—ally complexes also have catalytic properties. Tetraally zirconium [12090-34-5] on a siUca substrate catalyzes ethylene polymerization (265). Supported on sihca, ZrR (R = allyl or neopentyl) catalyzes olefin isomerization (266). 

The typical industrial catalyst has both microscopic and macroscopic regions with different compositions and stmctures the surfaces of industrial catalysts are much more complex than those of the single crystals of metal investigated in ultrahigh vacuum experiments. Because surfaces of industrial catalysts are very difficult to characterize precisely and catalytic properties are sensitive to small stmctural details, it is usually not possible to identify the specific combinations of atoms on a surface, called catalytic sites or active sites, that are responsible for catalysis. Experiments with catalyst poisons, substances that bond strongly with catalyst surfaces and deactivate them, have shown that the catalytic sites are usually a small fraction of the catalyst surface. Most models of catalytic sites rest on rather shaky foundations. 

Catalysis by Metals. Metals are among the most important and widely used industrial catalysts (69,70). They offer activities for a wide variety of reactions (Table 1). Atoms at the surfaces of bulk metals have reactivities and catalytic properties different from those of metals in metal complexes because they have different ligand surroundings. The surrounding bulk stabilizes surface metal atoms in a coordinatively unsaturated state that allows bonding of reactants. Thus metal surfaces offer an advantage over metal complexes, in which there is only restricted stabilization of coordinative... 

Reactions and catalytic properties of rhodium complexes in solution. B. R. James, Coord. Chem. Rev., 1966, 1,505-524 (160). 

In 2007, Smolensky and Eisen published a review entitled "Design of organometallic group IV heteroallylic complexes and their catalytic properties for polymerizations and olefin centered transformations.In this article a strong emphasis was placed on various synthetic and catalytic aspects of group IV metal amidinate complexes. It was clearly pointed out that such amidinate... 

A novel chiral dissymmetric chelating Hgand, the non-stabiUzed phosphonium ylide of (R)-BINAP 44, allowed in presence of [Rh(cod)Cl]2 the synthesis of a new type of eight-membered metallacycle, the stable rhodium(I) complex 45, interesting for its potential catalytic properties (Scheme 19) [81]. In contrast to the reactions of stabihzed ylides with cyclooctadienyl palladium or platinum complexes (see Scheme 20), the cyclooctadiene is not attacked by the carbanionic center. Notice that the reactions of ester-stabilized phosphonium ylides of BINAP with rhodium(I) (and also with palladium(II)) complexes lead to the formation of the corresponding chelated compounds but this time with an equilibrium be-... 

Nickel(II) complexes of ligands 38 (R=H,Me R =H,Me,Et,Tr,CH30 R =H, CH3O R =H, F, CH3O) are highly active catalysts for ethylene polymerization [86,159], whereas palladium(II) complexes possess catalytic properties in the copolymerization of CO and alkenes [160] (Scheme 36). 

Silicon-transition metal chemistry is a relatively new area. The work of Hein and his associates (1941) on Sn—Co derivatives established the possibility of forming bonds between a Group IVB metal and a transition element 139), but it was another fifteen years before CpFe(CO)2SiMej 203), the first of many silyl derivatives, was synthesized. The interest in these compounds derives from (1) comparison with the corresponding alkyl- and Ge-, Sn-, and Pb- transition metal (M) complexes, including the role of ir-back-bonding from filled d orbitals of M into empty d orbitals on Si (or other Group IVB metal), and (2) expectation of useful catalytic properties from such heteronuclear derivatives. 

Biocatalysis refers to catalysis by enzymes. The enzyme may be introduced into the reaction in a purified isolated form or as a whole-cell micro-organism. Enzymes are highly complex proteins, typically made up of 100 to 400 amino acid units. The catalytic properties of an enzyme depend on the actual sequence of amino acids, which also determines its three-dimensional structure. In this respect the location of cysteine groups is particularly important since these form stable disulfide linkages, which hold the structure in place. This three-dimensional structure, whilst not directly involved in the catalysis, plays an important role by holding the active site or sites on the enzyme in the correct orientation to act as a catalyst. Some important aspects of enzyme catalysis, relevant to green chemistry, are summarized in Table 4.3. 

In the course of studying a large nnmber of examples where the side chains of the imidazol- and imidazolidin-2-ylidene were altered, several research groups found that NHCs bearing exclnsively alkyl side chains did not provide catalysts with better characteristics when compared to SIMes- and DVIes-derived systems 14 and 15. While Herrmann and co-workers showed that an unsaturated NHC bearing cyclohexyl wing tips conld be incorporated into a second-generation catalyst that was active in metathesis [20-23], more recent studies showed that similar complexes were either very difficult to prepare or were unstable and showed dramatically decreased catalytic properties [24-26] (complexes 17-19, Fig. 3.4). 

The layer of titanium and ruthenium oxides usually is applied to a titanium substrate pyrolytically, by thermal decomposition (at a temperature of about 450°C) of an aqueous or alcoholic solution of the chlorides or of complex compounds of titanium and rathenium. The optimum layer composition corresponds to 25 to 30 atom % of ruthenium. The layer contains some quantity of chlorine its composition can be written as Ruq 2sTio 750(2- c)Cl r At this deposition temperature and Ru-Ti ratio, the layer is a poorly ordered solid solution of the dioxides of ruthenium and titanium. Chlorine is completely eliminated from the layer when this is formed at higher temperatures (up to 800°C), and the solid solution decomposes into two independent phases of titanium dioxide and ruthenium dioxide no longer exhibiting the unique catalytic properties. 

All these results indicate that one is just at the beginning of understanding the function of catalysts being deposited on a semiconductor. There is still quite a confusion in many papers published in this field. Therefore the catalytic properties depend so much on the procedure of deposition . It seems to be rather difficult to produce a catalyst for 02-formation, as shown by results obtained with Ti02 (see e.g.) . Rather recently new concepts for the synthesis of new catalysts have been developed applicable for multielectron transfer reactions. Examples are transition metal cluster compounds such as M04 2RU1 gSeg and di- and trinuclear Ru-complexes . 

Metalloporphyrin reactivity and catalytic properties can also be controlled by modifications of the porphyrin core. Ni coordination chemistry of core-modified porphyrins has been reviewed.1791,1792 Several X-ray structures of four-, five-, and six-coordinate Ni11 complexes with oxa-, thia-, and dioxatetraarylporphyrins are known. 

The synthesis, structure, and catalytic properties of a Pd11 complex with a partially hydrogenated ligand, shown in Figure 31, are described.393 This study provides the first asymmetric epoxidation of alkenes catalyzed by a palladium complex.393... 

Kostic et al. recently reported the use of various palladium(II) aqua complexes as catalysts for the hydration of nitriles.456 crossrefil. 34 Reactivity of coordination These complexes, some of which are shown in Figure 36, also catalyze hydrolytic cleavage of peptides, decomposition of urea to carbon dioxide and ammonia, and alcoholysis of urea to ammonia and various carbamate esters.420-424, 427,429,456,457 Qggj-jy palladium(II) aqua complexes are versatile catalysts for hydrolytic reactions. Their catalytic properties arise from the presence of labile water or other solvent ligands which can be displaced by a substrate. In many cases the coordinated substrate becomes activated toward nucleophilic additions of water/hydroxide or alcohols. New palladium(II) complexes cis-[Pd(dtod)Cl2] and c - Pd(dtod)(sol)2]2+ contain the bidentate ligand 3,6-dithiaoctane-l,8-diol (dtod) and unidentate ligands, chloride anions, or the solvent (sol) molecules. The latter complex is an efficient catalyst for the hydration and methanolysis of nitriles, reactions shown in Equation (3) 435... 

The above example outlines a general problem in immobilized molecular catalysts - multiple types of sites are often produced. To this end, we are developing techniques to prepare well-defined immobilized organometallic catalysts on silica supports with isolated catalytic sites (7). Our new strategy is demonstrated by creation of isolated titanium complexes on a mesoporous silica support. These new materials are characterized in detail and their catalytic properties in test reactions (polymerization of ethylene) indicate improved catalytic performance over supported catalysts prepared via conventional means (8). The generality of this catalyst design approach is discussed and additional immobilized metal complex catalysts are considered. 

CoSalen Y carries oxygen as a cargo.72 The catalytic properties of the zeolite-encapsulated metal complexes depend mainly on the complexed metal atoms, which are used usually as oxidation catalysts but other applications are also beginning to emerge. The zeolite-encapsulated catalysts can be regarded as biomimetic oxidation catalysts.73 In liquid-phase oxidation reactions catalyzed... 

The synthesis, characterization, and catalytic properties of materials obtained by the reaction of organometallic complexes of IIB, IVA, and VIA with metallic particles were studied extensively. Two types of materials may be obtained by... 

Finally, we come to enzyme models. D. W. Griffiths and M. L. Bender describe the remarkable catalytic property of certain cycloamyloses which act through formation of inclusion complexes, and in this respect recall the clefts containing the active sites in enzymes such as lysozyme and papain. 

---