Chromium oxidation reaction

Trimethylene dibromide (Section 111,35) is easily prepared from commercial trimethj lene glycol, whilst hexamethylene dibromide (1 O dibromohexane) is obtained by the red P - Br reaction upon the glycol 1 6-hexanediol is prepared by the reduction of diethyl adipate (sodium and alcohol lithium aluminium hydride or copper-chromium oxide and hydrogen under pressure). Penta-methylene dibromide (1 5-dibromopentane) is readily produced by the red P-Brj method from the commercially available 1 5 pentanediol or tetra-hydropyran (Section 111,37). Pentamethylene dibromide is also formed by the action of phosphorus pentabromide upon benzoyl piperidine (I) (from benzoyl chloride and piperidine) ... 

Hydrogenations with coppcr-chromium oxide catalyst are usually carried out in the liquid phase in stainless steel autoclaves at pressures up to 5000-6000 lb. per square inch. A solvent is not usually necessary for hydrogenation of an ester at 250° since the original ester and the alcohol or glycol produced serve as the reaction medium. However, when dealing with small quantities and also at temperatures below 200° a solvent is desirable this may be methyl alcohol, ethyi alcohol, dioxan or methylcyc/ohexane. 

The equilibrium is more favorable to acetone at higher temperatures. At 325°C 97% conversion is theoretically possible. The kinetics of the reaction has been studied (23). A large number of catalysts have been investigated, including copper, silver, platinum, and palladium metals, as well as sulfides of transition metals of groups 4, 5, and 6 of the periodic table. These catalysts are made with inert supports and are used at 400—600°C (24). Lower temperature reactions (315—482°C) have been successhiUy conducted using 2inc oxide-zirconium oxide combinations (25), and combinations of copper-chromium oxide and of copper and silicon dioxide (26). 

Chromium Oxide-Based Catalysts. Chromium oxide-based catalysts were originally developed by Phillips Petroleum Company for the manufacture of HDPE resins subsequendy, they have been modified for ethylene—a-olefin copolymerisation reactions (10). These catalysts use a mixed sihca—titania support containing from 2 to 20 wt % of Ti. After the deposition of chromium species onto the support, the catalyst is first oxidised by an oxygen—air mixture and then reduced at increased temperatures with carbon monoxide. The catalyst systems used for ethylene copolymerisation consist of sohd catalysts and co-catalysts, ie, triaLkylboron or trialkyl aluminum compounds. Ethylene—a-olefin copolymers produced with these catalysts have very broad molecular weight distributions, characterised by M.Jin the 12—35 and MER in the 80—200 range. 

HTS catalyst consists mainly of magnetite crystals stabilized using chromium oxide. Phosphoms, arsenic, and sulfur are poisons to the catalyst. Low reformer steam to carbon ratios give rise to conditions favoring the formation of iron carbides which catalyze the synthesis of hydrocarbons by the Fisher-Tropsch reaction. Modified iron and iron-free HTS catalysts have been developed to avoid these problems (49,50) and allow operation at steam to carbon ratios as low as 2.7. Kinetic and equiUbrium data for the water gas shift reaction are available in reference 51. 

H. Adkins, Reactions of Hydrogen with Organic Compounds over Chromium Oxide andNickel Catalysts, University of Wisconsin Press, Madison, 1946. 

Dehydrogenation of /i-Butane. Dehydrogenation of / -butane [106-97-8] via the Houdry process is carried out under partial vacuum, 35—75 kPa (5—11 psi), at about 535—650°C with a fixed-bed catalyst. The catalyst consists of aluminum oxide and chromium oxide as the principal components. The reaction is endothermic and the cycle life of the catalyst is about 10 minutes because of coke buildup. Several parallel reactors are needed in the plant to allow for continuous operation with catalyst regeneration. Thermodynamics limits the conversion to about 30—40% and the ultimate yield is 60—65 wt % (233). 

Copper—cadmium and zinc—chromium oxides seem to provide most selectivity (38—42). Copper chromite catalysts are not selective. Reduction of red oil-grade oleic acid has been accompHshed in 60—70% yield and with high selectivity with Cr—Zn—Cd, Cr—Zn—Cd—Al, or Zn—Cd—A1 oxides (43). The reduction may be a homogeneously catalyzed reaction as the result of the formation of copper or cadmium soaps (44). 

Methanol Synthesis. Methanol has been manufactured on an industrial scale by the cataly2ed reaction of carbon monoxide and hydrogen since 1924. The high pressure processes, which utili2e 2inc oxide—chromium oxide catalysts, are operated above 20 MPa (200 atm) and temperatures of 300—400°C. The catalyst contains approximately 72 wt % 2inc oxide, 22 wt % chromium (II) oxide, 1 wt % carbon, and 0.1 wt % chromium (VI) the balance is materials lost on heating. 

Chromium oxide is mixed with aluminum powder, placed in a refractory-lined vessel, and ignited with barium peroxide and magnesium powder. The reaction is exothermic and self-sustaining. Chromium metal of 97—99% purity is obtained, the chief impurities being aluminum, iron, and silicon (Table 4). Commercial chromium metal may also be produced from the oxide by reduction with silicon in an electric-arc furnace. 

The preferred catalyst is one which contains 5% of chromium oxides, mainly Cr03, on a finely divided silica-alumina catalyst (75-90% silica) which has been activated by heating to about 250°C. After reaction the mixture is passed to a gas-liquid separator where the ethylene is flashed off, catalyst is then removed from the liquid product of the separator and the polymer separated from the solvent by either flashing off the solvent or precipitating the polymer by cooling. 

Further oxidation of an aldehyde product to the corresponding carboxylic acid does not take place. Moreover, the SM>ern oxidation reaction does not require the use of toxic and pollutant chromium reagents. The activated DMSO species, however, are stable only at low temperature, which might in some cases be a drawback of this method. 

A silver-gauze catalyst is still used in some older processes that operate at a relatively higher temperature (about 500°C). New processes use an iron-molyhdenum oxide catalyst. Chromium or cohalt oxides are sometimes used to dope the catalyst. The oxidation reaction is exothermic and occurs at approximately 400-425 °C and atmospheric pressure. Excess air is used to keep the methanol air ratio helow the explosion limits. Figure 5-6 shows the Haldor Topsoe iron-molyhdenum oxide catalyzed process. 

The change of shape of the kinetic curves with monomer and inhibitor concentration at ethylene polymerization by chromium oxide catalysts may be satisfactory described 115) by the kinetic model based on reactions (8)-(14). 

Two ions of the transition metal take part in this reaction. However, in the case of supported one-component catalysts the formation of the active bond seems to occur on the interaction of the monomer with isolated ions of the transition metal. That may be illustrated by the data showing that the activity of chromium oxide catalysts decreases linearly with decreasing chromium content (or even increases per chromium ion) to the rather low (0.01%) chromium concentrations on the catalyst surface (62, 69). In... 

Chromium compounds as catalysts, 188 Chromium oxide in catalytic converter, 62 Chromium oxide catalysts, 175-184 formation of active component, 176,177 of Cr-C bonds, 177, 178 propagation centers formation of, 175-178 number of, 197, 198 change in, 183, 184 reduction of active component, 177 Clear Air Act of 1970, 59, 62 Cobalt oxide in catalytic converter, 62 Cocatalysts, 138-141, 152-154 Competitive reactions, 37-43 Copper chromite, oxidation of CO over, 86-88... 

An autoclave (Note 1) is charged with 200 g. (1.28 moles) of 2,3-dimethylnaphthalene (Note 2), 940 g. (3.14 moles, 23% excess) of sodium dichromate dihydrate, and 1.8 1. of water. The autoclave is closed, heated to 250°, and shaken continuously at this temperature for 18 hours. The autoclave is cooled with continued agitation (Note 3), the pressure is released, and the autoclave is opened. The contents are transferred to a large vessel (Note 4). To effect complete transfer, the autoclave is rinsed with several 500-ml. portions of hot water. Green hydrated chromium oxide in the reaction mixture is separated on a large Buchner funnel and washed with warm water until the filtrate is colorless. The combined filtrates (7-8 1.) are acidified with 1.3 1. of 6N hydrochloric acid. The acidified mixture is allowed to... 

Thus zeolite ZSM-5 can be grown (ref. 15) onto a stainless steel metal gauze as shown in Figure 6. Presumably the zeolite crystals are chemically bonded to the (chromium-) oxide surface layer of the gauze. After template removal by calcination and ion exchange with Cu(II) a structured catalyst is obtained with excellent performance (ref. 15) in DeNOx reactions using ammonia as the reductant. 

The fluorination of CF3CH2CI into CF3CH2F over chromium oxides is accompanied by a dehydrofluorination reaction (formation mainly of CF2=CHC1). This dehydrofluorination is responsible for the deactivation of the catalyst. A study of the dehydrofluorination reaction of CF3CH2CI proves that the reaction is favoured when the degree of fluorination of chromium oxide increases. Consequently it would be favoured on strong acid sites. Adding nickel to chromium oxide decreases the formation of alkenes and increases the selectivity for fluorination while the total activity decreases. Two kinds of active sites would be present at the catalyst surface. The one would be active for both the reactions of dehydrofluorination and of fluorination, the other only for the fluorination reaction. 

With this in view, we studied the development of the dehydrofluorination reaction of CF3CH2CI as function of the degree of fluorination of chromium oxide. Moreover, nickel and chromium oxide catalysts were prepared and tested for the dehydrofluorination reaction. Nickel oxide, a basic compound [S], could poison selectively the tes involved during the dehydrofluorination reaction. 

---