CHEMFETs transistors

Comparable is the CHEMFET (Chemical Field Effect Transistor), a chemical sensor on a FET, e.g., for H , Na, K and Ca2+ in blood, four CHEMFETs had been mounted on one plate [Clin. Chem., 30 (1984) 1361. 

Chemically modified waxes, 26 220 Chemically resistant fibers, 13 389 Chemically sensitive field-effect transistors (ChemFETs), 22 269. See also Field effect transistors (FETs)... 

Low-cost, disposable, Si02/Si3N4 chemical field effect transistor (ChemFET) microsensors have been fabricated for pH measurements and adapted to biochemical applications by using polyvinyl alcohol (PVA) enzymatic layers deposited and patterned... 

Successful operation of potentiometric chemosensors opened up the possibility for the fabrication of chemical field-effect transistors (chemFETs) and ion-selective field-effect transistors (ISFETs). A sensing element in these devices, i.e. the MIP film loaded with the molecular, neutral or ionic, respectively, imprinted substance is used to modify surface of the transistor gate area. Apparently, any change in the potential of the film due to its interactions with the analyte alters the current flowing between the source and drain. 

Pd MOS STRUCTURES The Pd MOS device (capacitor and field effect transistor) has been extensively studied as a model chemical sensor system and as a practical element for the detection of hydrogen molecules in a gas. There have been two outstanding reviews of the status of the Pd MOS sensor with primary emphasis on the reactions at the surface (7,8). In this section, the use of the device as a model chemical sensor will be emphasized. As will be seen, the results are applicable not only to the Pd based devices, they also shed light on the operation of chemfet type systems as well. Because of its simplicity and the control that can be exercised in its fabrication, the discussion will focus on the study of the Pd-MOSCAP structure exclusively. The insights gained from these studies are immediately applicable to the more useful Pd-MOSFET. 

Figure 3. Ionic leakage paths in chemfet structures a.Schematic illustration of ionic leakage paths around the chemically sensitive membrane. Leakage through the membrane also occurs but is not illustrated b. Schematic illustration of leakage at the surface of a standard ion sensitive field effect transistor.

Cobben, P., Egberink, R. J. M., Bomer, J. G., Bergveld, P., Verboom, W., Reinhoudt, D. N., Transduction of selective recognition of heavy-metal ions by chemically modified field-effect transistors (chemfets). J. Am. Chem. Soc. 1992, 114, 10573-10582. 

Mode 2 devices which rely on a different detection principle are the Kelvin probe sensor and the CHEMFET. In the first case, a vibrating capacitor measures the change of the work function (see Figure 2), while in the second case the interaction is detected in the field-effect transistor mode.29 31... 

In this chapter our work is described that deals with the development of chemically modified Field Effect Transistors (CHEMFETs) that are able to transduce chemical information from an aqueous solution directly into electronic signals. The emphasis of this part of our work will be on the materials that are required for the attachment of synthetic receptor molecules to the gate oxide surface of the Field Effect Transistor. In addition the integration of all individual components into one defined chemical system will be described. Finally, several examples of cation selective sensors that have resulted from our work will be presented. 

The first example of chemically modified field-effect transistors (CHEMFETs) was reported by Janata et al. [15] in 1978 for ion-sensitive field-effect transistors (ISFETs) in which the gate oxide was covered with a PVC membrane containing... 

The basic building block of all CHEMFETs is the ion-sensitive field effect transistor (ISFET), introduced in 1970 by Bergveld [4]. In an ISFET the gate metal of a metal oxide semiconductor field effect transistor (MOSFET) is removed and the resulting gate oxide surface (2) is directly exposed to the electrolyte solution (Figure 1). 

CHEMFET Chemically sensitive field effect transistor... 

The field of molecular electronics may be considered to encompass much more than molecular electronic devices. In its broadest context, molecular electronics may be regarded as simply the application of molecules, primarily organic molecules, to electronics. This definition would include such areas as liquid crystalline materials, piezoelectric materials such as poly(vinylidine fluoride), chemically sensitive field-eflFect transistors (CHEMFET), and the whole range of electroactive polymers. These applications are beyond the scope of this book and are covered in other reviews 34, 33). However, given the basic tenet of molecular electronics, namely, the ability to engineer and assemble molecular structures into a useful device, the broader definition raises the question of whether organic molecules can be specifically assembled or engineered for unique applications in electronics. 

Another important class of sensors is constituted by inorganic field-effect gas sensors, known as chemically sensitive field-effect transistors (CFIEMFETs) [28,31-35]. Their most successful application is in highly sensitive hydrogen sensors commercialized by Sensistor AB (Sweden) more than 15 years ago as leak detectors. They have proven over the years to be very reliable. A CHEMFET is essentially a... 

---