Water matrix, cellulose

Some tablets combine sustained-release and rapid disintegration characteristics. Products such as K-Dur (Key Pharmaceuticals) combine coated potassium chloride crystals in a rapidly releasing tablet. In this particular instance, the crystals are coated with ethylcellulose, a water-insoluble polymer, and are then incorporated into a rapidly disintegrating microcrystalline cellulose (MCC) matrix. The purpose of this tablet is to minimize GI ulceration, commonly encountered by patients treated with potassium chloride. This simple but elegant formulation is an example of a solid dosage form strategy used to achieve clinical goals. 

Cellulose-water may act as a matrix and promote the development of arrays of comonomer charge transfer complexes (19). The cellulose acts not only as a substrate for such alignment but also as a complexing agent. The matrix of complexes may be represented as shown in I (styrene-methyl methacrylate) and II (butadiene-acrylonitrile). The radical-, thermal-, and radiation-induced graft polymerizations involve homopolymerization of comonomer complexes rather than copolymerization of uncomplexed monomers. 

Detailed studies on thermo-osmosis using highly selective cellulose acetate membrane in the presence and absence of osmotic pressure difference have also been carried out [25]. Using general description of thermo-osmosis based on irreversible thermodynamics, it was shown that coupling between the flow of heat and the flow of water is quite loose possibly on account of thermal leak between the compartments. Whatever the detailed stmctural interpretation, it was argued that in annealed, less-permeable membranes, the water-matrix interaction is increased relative to the water-water interaction and with only this type of interaction strong thermo-osmosis is expected. 

This technique produces an intimate mixture of cellulose and matrix polymer, which is preserved as the water is evaporated during matrix consolidation. High strength composite films have been produced. A major drawback with this approach is that it is only suitable for forming composite films, and that the consolidation of the polymer matrix requires volatilization and removal of the solvent phase, which may create defects (voids) in the final product and poses economic and environmental concerns. 

The commercially available Sporanox capsule formulation is a solid dispersion relying on the principle of supersaturation to enhance the intestinal absorption of the antifungal itraconazole (ITR), a weak base (pKa = 4) with an extremely low and pH-dependent aqueous solubility (ca. 1 ng/mL in water, 6 mg/mL in 0.1 M HCl). This formulation comprises a molecular dispersion of ITR in a hydroxypropylmethyl-cellulose (HPMC) matrix, which is coated onto inert sugar spheres. Dissolution of HPMC in media simulating the gastric environment results in supersaturated concentrations which are maintained for at least 4 h. HPMC is believed to prevent ITR from precipitation in the stomach and in the intestine, resulting in significant absorption (maximum fraction absorbed ca. 85 %) and oral bioavailability (ca. 55 % Brewster et al. 2008). 

The polymer inclusion membranes (PIMs) prepared by physical immobilization of P-CD polymers (Fig. 18) as ion carriers in cellulose triacetate matrix, were used for metal ions transport [17], The metal ions were transported through plasticized CTA membranes from aqueous solutions into distilled water. As fte plasticizer o-nitrophenyl pentyl ether (ONPPE) was used in this membrane. Polymers crosslinked by l-(2-nonenyl)sucdnic anhydride 18a and by l-(dodecynyl)succinic anhydride 18b have been obtained by reacting P-CD with sodium hydride and suitable anhydride at their molar ratio 1 7 7. The fraction of the polymer crosslinked by l-(2-nonenyl)succinic anhydride had the molecular mass >1000 kDa. 

Fibers and Fiber Sources. Fibers are present ia varyiag amounts ia food iagredients and are also added separately (see Dietary fiber). Some fibers, including beet pulp, apple pomace, citms pulp, wheat bran, com bran, and celluloses are added to improve droppiags (feces) form by providing a matrix that absorbs water. Some calorie-controUed foods iaclude fibers, such as peanut hulls, to provide gastroiatestinal bulk and reduce food iatake. Peanut hulls normally have a high level of aflatoxias. They must be assayed for aflatoxia and levels restricted to prevent food rejection and undesirable effects of mycotoxias. 

A number of after-treatments with polyester copolymers carried out after sodium hydroxide processing are reported to produce a more hydrophilic polyester fabric (197). Likewise, the addition of a modified cellulose ether has improved water absorbency (198). Other treatments used on cotton and blends are also effective on 100% polyester fabrics (166—169). In this case, polymeri2ation is used between an agent such as DMDHEU and a polyol to produce a hydrophilic network in the synthetic matrix (166—169). 

Bis(tributyltin) oxide is known to break down to inorganic tin under UV irradiation in laboratory conditions (509, 510), and the decomposition may be accelerated by absorbing the organotin compound on a cel-lulosic matrix (511). As bis(tributyltin) oxide is known to react rapidly with carbon dioxide (atmospheric, or trapped in various cellulosic materials, such as cotton or wood) (512), to form bis(tributyltin) carbonate, (BusSnO)2CO, the observed UV degradation pattern may be rationalized in terms of more-ready breakdown of the carbonate than of the oxide, due to the presence of the carbonyl chromophore. The half-life of bis(tributyltin) oxide in pond water has recently been given as 16 days (513). Diorganotin compounds have also been shown to decompose to inorganic tin under UV irradiation (514, 515). 

The interaction between polymer matrix and filler leads to the formation of a bound polymer in close proximity to the reinforcing filler, which restricts the solvent uptake [13]. The composites containing acetylated cellulose fillers exhibited higher uptake of toluene compared to water in accordance with their hydrophobic nature. 

This method is very useful for separating amino acids found in food samples. The most effective matrix for separation is an absorbent cellulose-based filter paper. A very effective mobile phase is 70% isopropyl alcohol in water. Although the 20 amino acids are chemically very similar, they may be successfully separated by this method. Amino acids interact with the stationary phase to different extents, thus moving at different speeds. Chemical differences among amino acids that determine migration speed include molecular weight, charge, and polarity. 

In the homogenous mixture of Starch and Polyvinyl alcohol (PVA), 30 % of plasticizer was mixed to make Pure blend. Then 10 % cellulose was mixed into above mixture followed by removal of extra water gave Cellulose-Reinforced starch-PVA blends. The different proportions of Fly ash were mixed into mixture of Cellulose-Reinforced starch-PVA blends to get various fly ash inserted Cellulose-Reinforced starch-PVA blends. Solubility, swelling behaviour and water absorption studies of Fly ash blends were measured at different time intervals at relative humidity of 50-55%. The insertion of Cellulose into starch-PVA blend decreases the solubility of blends due to the hydrophobicity of cellulose, but the solubility further increases by insertion of Fly ash into starch-PVA matrix that indicating the mechanical stability enhancement of blends. The water absorption behaviour of fly ash blends increases rapidly upto 150 min and then no change. The optimum concentration of Fly ash into Cellulose-Reinforced starch-PVA blend was 4%. 

Oxygen Availability in Degrading Films. A major difference between natural materials and starch-plastic or cellulose-plastic blends is that the hydrophilic and relatively permeable matrix of materials like wood and hydrated polysaccharide films allows diffusion of O2 and release of nutrients from sites at a distance from the invasion site. As colonization proceeds, pore enlargement occurs when the pore walls are degraded (8) or as the polymer matrix of amylose or PVA films is hydrolyzed (10.12). In contrast, the LDPE matrix supplies no nutrients, hinders diffusion of water and O2, and the pore diameter cannot be increased. The consequence of impermeability is that the sole means of obtaining O2 and nutrients is by diffusion through water-filled pores. 

The major polymers that make up the wall are polysaccharides and lignin. These occur together with more minor but very important constituents such as protein and lipid. Water constitutes a major and very important material of young, primary walls (2). The lignin is transported in the form of its building units (these may be present as glucosides) and is polymerized within the wall. Those polysaccharides which make up the matrix of the wall (hemicelluloses and pectin material) are polymerized in the endomembrane system and are secreted in a preformed condition to the outside of the cell. Further modifications of the polysaccharides (such as acetylation) may occur within the wall after deposition. Cellulose is polymerized at the cell surface by a complex enzyme system transported to the plasma membrane (3). 

Filtration can remove fine suspended solids and microorganisms, and microfiltration membranes of cellulose acetate or polyamides are available that have pores 0.1-20 /xm in diameter. Clogging of such fine filters is an ever-present problem, and it is usual to pass the water through a coarser conventional filter first. Ultrafiltration with membranes having pores smaller than 0.1 fim requires application of pressures of a few bars to keep the membrane surface free of deposits, water flows parallel to the membrane surfaces, with only a small fraction passing through the membrane. The membranes typically consist of bundles of hollow cellulose acetate or polyamide fibers set in a plastic matrix. Ultrafiltration bears some resemblance to reverse osmosis technology, described in Section 14.4, with the major difference that reverse osmosis can remove dissolved matter, whereas ultrafiltration cannot. 

---