Water-Insoluble Polymers

Polyion complex technique [40] is a unique method for immobilization of bilayer membranes with polymers. Water-insoluble complex is precipitated as the polyion complex when an aqueous solution of the charged bilayer membrane is mixed with a water solution of the counter charged polyelectrolyte. Stoichiometric ion pair formation is often found. Aging of the precipitate in a hot mixture kept above phase transition temperature of the bilayer membrane completes the ion exchange reaction [41], Chloroform solution of the polyion complex is washed by water several times to remove water soluble components [42]. 

POLY(IMINO(l-OXO-l,6-HEXANEDIYL)) see PJY500 POLYMALEIC ACID see PJY850 POLYMERS of EPICHLOROHYDRIN and 2,2-BIS(4-HYDROXYPHENYL)PIPERAZINE see ECM500 POLYMERS, WATER-INSOLUBLE see PKA850 POLYMERS, WATER-SOLUBLE see PKA860 POLYMETHYLENEPOLYPHENYL ISOCYANATE see PKBIOO... 

Further modification and fine tuning of drug release from HPMC matrices may be achieved by the use of other non-ionic/ionic polymers, water-insoluble polymers, polysaccharides or hydrophobic excipients. 

Polyamides are well-known industrial products having applications in many areas (7). For instance, the Nylon polymers (water-insoluble polyamides) are widely used in fibers. A water-soluble poly(aminoamide), derived from adipic acid and diethylene triamine, is the precursor to a well-known industrial resin (2). This poly(aminoamide) is currently produced by a chemical reaction at elevated temperatures which is accompanied by the formation of some branched structures. Subsequent derivatization of this polyamide produces a water-soluble resin, known for its ability to impart wet strength to paper and paper products (2a, 2b) and shrink proofing to wools and other textiles (2c). 

Superabsorbents. Water-sweUable polymers are used extensively in consumer articles and for industrial appUcations. Most of these polymers are cross-linked acryUc copolymers of metal salts of acryUc acid and acrylamide or other monomers such as 2-acrylamido-2-methylpropanesulfonic acid. These hydrogel forming systems can have high gel strength as measured by the shear modulus (134). Sometimes inorganic water-insoluble powder is blended with the polymer to increase gel strength (135). Patents describe processes for making cross-linked polyurethane foams which contain superabsorbent polymers (136,137). 

Poly(alI lene glycol)s. While these can be made from polymeri2ation of any alkylene oxide, they are usually prepared either from propylene oxide as the water-insoluble type, or as water-soluble copolymers of propylene oxide and up to 50% ethylene oxide (35,36) (see Polyethers, propylene OXIDE polymers). Current worldwide production is estimated to be about 45,000 t. 

All phosphoms oxides are obtained by direct oxidation of phosphoms, but only phosphoms(V) oxide is produced commercially. This is in part because of the stabiUty of phosphoms pentoxide and the tendency for the intermediate oxidation states to undergo disproportionation to mixtures. Besides the oxides mentioned above, other lower oxides of phosphoms can be formed but which are poorly understood. These are commonly termed lower oxides of phosphoms (LOOPs) and are mixtures of usually water-insoluble, yeUow-to-orange, and poorly characteri2ed polymers (58). LOOPs are often formed as a disproportionation by-product in a number of reactions, eg, in combustion of phosphoms with an inadequate air supply, in hydrolysis of a phosphoms trihahde with less than a stoichiometric amount of water, and in various reactions of phosphoms haUdes or phosphonic acid. LOOPs appear to have a backbone of phosphoms atoms having —OH, =0, and —H pendent groups and is often represented by an approximate formula, (P OH). LOOPs may either hydroly2e slowly, be pyrophoric, or pyroly2e rapidly and yield diphosphine-contaminated phosphine. LOOP can also decompose explosively in the presence of moisture and air near 150° C. 

Emulsion Polymerization. Emulsion and suspension reactions are doubly heterogeneous the polymer is insoluble in the monomer and both are insoluble in water. Suspension reactions are similar in behavior to slurry reactors. Oil-soluble initiators are used, so the monomer—polymer droplet is like a small mass reaction. Emulsion polymerizations are more complex. Because the monomer is insoluble in the polymer particle, the simple Smith-Ewart theory does not apply (34). 

Dye caiiieis aie needed foi complete dye penetration of polyester fibers. Carriers cause the glass-transition temperature, of the polyester polymer to become lower and allow the penetration of water-insoluble dyes into the fiber. 

Suspension polymerization of water-insoluble monomers (e.g., styrene and divinylbenzene) involves the formation of an oil droplet suspension of the monomer in water with direct conversions of individual monomer droplets into the corresponding polymer beads. Preparation of beaded polymers from water-soluble monomers (e.g., acrylamide) is similar, except that an aqueous solution of monomers is dispersed in oil to form a water-in-oil (w/o) droplet suspension. Subsequent polymerization of the monomer droplets produces the corresponding swollen hydrophilic polyacrylamide beads. These processes are often referred to as inverse suspension polymerization. 

The second step in the production of monodispersed polymer particles involves the swelling of activated particles with a monomer or a mixture of monomers, diluents, and porogens, and the shape of the swollen oil droplets must be maintained in the continuous aqueous phase. The monomer or the mixture of monomers may be added in bulk form, preferably as an aqueous dispersion to increase the rate of swelling, especially in the case of relatively water-insoluble monomers. 

Acrylamide readily undergoes polymerization by conventional free radical methods, ionizing radiation, ultrasonic waves, and ultraviolet radiation. The base-cata-lized hydrogen transfer polymerization of acrylamide yields poly-/3-alanine (Nylon 3) a water insoluble polymer that is soluble in certain hot organics. All current industrial production is believed to be by free radical polymerization. 

Emulsion polymerization is widely used to produce polymers in the form of emulsions, such as paints and floor polishes. It also used to polymerize many water insoluble vinyl monomers, such as styrene and vinyl chloride. In emulsion polymerization, an agent emulsifies the monomers. Emulsifying agents should have a finite solubility. They are either ionic, as in the case of alkylbenzene sulfonates, or nonionic, like polyvinyl alcohol. 

Polyacrylics are produced by copolymerizing acrylonitrile with other monomers such as vinyl acetate, vinyl chloride, and acrylamide. Solution polymerization may be used where water is the solvent in the presence of a redox catalyst. Free radical or anionic initiators may also be used. The produced polymer is insoluble in water and precipitates. Precipitation polymerization, whether self nucleation or aggregate nucleation, has been reviewed by Juba. The following equation is for an acrylonitrile polymer initiated by a free radical ... 

AGX are also the dominant hemicelluloses in the cell walls of hgnified supporting tissues of grasses and cereals. They were isolated from sisal, corncobs and the straw from various wheat species [4]. A more recent study on corncob xylans [30] showed the presence of a hnear, water-insoluble polymer... 

In a most recent paper [418] the preparation of corn fiber arabinoxylan esters by reaction of the polymer with C2-C4 anhydrides using methanesul-fonic acid as a catalyst is described. The water-insoluble derivatives with high molecular weight showed glass-transition temperatures from 61 to 138 °C, depending on the DS and substituent type. The products were thermally stable up to 200 °C. Above this temperature their stability rapidly decreased. 

As a polycation, chitosan spontaneously forms macromolecular complexes upon reaction with anionic polyelectrolytes. These complexes are generally water-insoluble and form hydrogels [90,91]. A variety of polyelectrolytes can be obtained by changing the chemical structure of component polymers, such as molecular weight, flexibility, fimctional group structure, charge density, hydrophilicity and hydrophobicity, stereoregularity, and compatibility, as... 

A solvent evaporation procedure particularly useful for entrapment of water-insoluble agents in the biodegradable polymers has... 

Chang, R. K., Price, J. C., and Whitworth, C. W., Enhancement of dissolution rate by incorporation into a water insoluble polymer, polycaprolactone. Drug Dev. Ind. Pharm., 13. 249-256, 1987. 

---