Carbon black technology

A review has appeared on the photodegradation of dyes and another article on carbon black technology. Of particular interest is the observation that zinc l-hydroxy-2-naphthoate photoprotects photochromic dyes " as does a UV absorber for azo dyed silk. ... 

This treatise is not intended to be an encyclopedia of carbon black technology. 

In attempting to predict the direction that future research in carbon black technology will follow, a review of the literature suggests that carbon black-elastomer interactions will provide the most potential to enhance compound performance. Le Bras demonstrated that carboxyl, phenolic, quinone, and other functional groups on the carbon black surface react with the polymer and provided evidence that chemical crosslinks exist between these materials in vul-canizates (LeBras and Papirer, 1979). Ayala et al. (1990, 1990) determined a rubber-filler interaction parameter directly from vulcanizatemeasurements. The authors identified the ratio a jn, where a = slope of the stress-strain curve that relates to the black-polymer interaction, and n = the ratio of dynamic modulus E at 1 and 25% strain amplitude and is a measure of filler-filler interaction. This interaction parameter emphasizes the contribution of carbon black-polymer interactions and reduces the influence of physical phenomena associated with networking. Use of this defined parameter enabled a number of conclusions to be made ... 

In attempting to predict the direction which future research in carbon black technology will follow, a review of the literature suggests that carbon black-elastomer interactions will provide the most potential to enhance compound performance. Le Bras demonstrated that carboxyl, phenolic, quinone. 

Bicomponent technology has been used to introduce functional and novelty effects other than stretch to nylon fibers. For instance, antistatic yams are made by spinning a conductive carbon-black polymer dispersion as a core with a sheath of nylon (188) and as a side-by-side configuration (189). At 0.1—1.0% implants, these conductive filaments give durable static resistance to nylon carpets without interfering with dye coloration. Conductive materials such as carbon black or metals as a sheath around a core of nylon interfere with color, especially light shades. 

Consumer articles often use colorants (qv), reodorants, or finishing agents. Carbon black (qv) provides the best technological properties for industrial appHcations, so most mbber articles are black. Red iron oxide or other inorganic pigments are used to color mineral-filled articles. Organic... 

Coin and Button Cell Commercial Systems. Initial commercialization of rechargeable lithium technology has been through the introduction of coin or button cells. The eadiest of these systems was the Li—C system commercialized by Matsushita Electric Industries (MEI) in 1985 (26,27). The negative electrode consists of a lithium alloy and the positive electrode consists of activated carbon [7440-44-0J, carbon black, and binder. The discharge curve is not flat, but rather slopes from about 3 V to 1.5 V in a manner similar to a capacitor. Use of lithium alloy circumvents problems with cycle life, dendrite formation, and safety. However, the system suffers from generally low energy density. 

A polymer blend is a physical or mechanical blend (alloy) of two or more homopolymers or copolymers. Although a polymer blend is not a copolymer according to the above definition, it is mentioned here because of its commercial importance and the frequency with which blends are compared with chemically bonded copolymers. Another technologically significant material relative to the copolymer is the composite, a physical or mechanical combination of a polymer with some unlike material, eg, reinforcing materials such as carbon black, graphite fiber, and glass (see Composite materials). 

In order to test this concept a series of compounds was prepared in a 5 L Shaw Intermix (rubber internal mixer, Mark IV, Kl) with EPDM (Keltan 720 ex-DSM elastomers an amorphous EPDM containing 4.5 wt% of dicyclopentadiene and having a Mooney viscosity ML(1 +4) 125°C of 64 MU 100 phr), N550 carbon black (50 phr), diisododecyl phthalate (10 phr), stearic acid (2 phr), and l,3-bis(tert-butylperoxy-isopropyl)benzene (Perkadox 14/40 MB ex Akzo Nobel 40% active material 6 or 10 phr). A polar co-agent (15 phr) was admixed to the masterbatch on an open mill and compounds were cured for 20 min at 180°C in a rheometer (MDR2000, Alpha Technologies). The maximum torque difference obtained in the rheometer experiments was used as a measure of... 

Donnet, J.B., Roop, C.B., and Wang, M.J., Carbon Black Science and Technology, Marcel Dekker New York, 1993, 461. 

Increasing price of crude oil has built up pressure on tire and automobile industry to develop low rolling-resistant tire with better traction. Combination of carbon and silica with coupling agent (dual filler technology) shows low RR with better traction and skid resistance in tire tread compound. Carbon black developed by plasma process and nanostructure black are other new significant developments in filler technology. 

New Technology for Carbon Black Dispersion in Rubber—Continuous... 

N. Mandal, S. Dasgupta, and R. Mukhopadhyay, Regeneration of carbon black from waste automobile tires and its use in carcass compound. Progress in Rubber, Plastics and Recycling Technology, 21(1), 55, 2005. 

The air gas-diffusion electrode developed in this laboratory [2] is a double-layer tablet comprising a porous hydrophobic gas layer and a catalytic layer in which the catalyst is placed. The gas layer of the electrode is prepared from hydrophobic material carbon black modified with PTFE by a special technology [3], The catalytic layer contains a porous catalyst. 

The formation of a network or net-like structure. In rubber technology this term was first applied to the anisotropy of carbon black particles, which were described as having a reticulate chain structure , later abbreviated simply to structure . Retracted Spew... 

Ellis, C., The Chemistry of Petroleum Derivatives, Chemical Catalog, New York, 1934, 237. Kiihner, G. and Voll, M., in Carbon Black Science and Technology, Donnet, J. B., Bansai, R. C., and Wang, M.-J., Eds., Marcel Dekker, New York, 1993, 57. 

---