Calcium treated

Lignites and lignosulfonates can act as o/w emulsifiers, but generally are added for other purposes. Various anionic surfactants, including alkylarylsulfonates and alkylaryl sulfates and poly(ethylene oxide) derivatives of fatty acids, esters, and others, are used. Very Httle oil is added to water-base muds in use offshore for environmental reasons. A nonionic poly(ethylene oxide) derivative of nonylphenol [9016-45-9] is used in calcium-treated muds (126). 

The administration of Qio or quercetin to rats protected against endotoxin-induced shock in rat brain [252]. It was found that the pretreatment with these antioxidants diminished the shock-induced increase in brain MDA and nitric oxide levels. Interesting data have been obtained by Yamamura et al. [253] who showed that ubiquinone Qi0 is able to play a double role in mitochondria. It was found that on the one hand, Q10 enhanced the release of hydrogen peroxide from antimycin A- or calcium-treated mitochondria, but on the other hand, it inhibited mitochondrial lipid peroxidation. It was proposed that Q10 acts as a prooxidant participating in redox signaling and as an antioxidant suppressing permeability transition and cytochrome c release. 

Morozumi, M., Flossain, R. Z., Yamakawa, K., Hokama, S., Nishijima, S., Oshiro, Y., Uchida, A., Sugaya, K., and Ogawa, Y. (2006). Gastrointestinal oxalic acid absorption in calcium-treated rats. Urol. Res. 34,168-172. 

N.A. Mucilage, calcium." Treat urinary and digestive problems. It has mild antibiotic effect. 

There are, however, technological means available to burn incompletely desulfurized fuels at the same time minimizing SO2 emissions. In the auto-desulfurizing AUDE boiler developed by IFF, the effluent is treated in place by an absorbent based on lime and limestone calcium sulfate is obtained. This system enables a gas desulfurization of 80% it requires nevertheless a relatively large amount of solid material, on the order of 200 kg per ton of fuel. 

Industrially. phosphoric(V) acid is manufactured by two processes. In one process phosphorus is burned in air and the phos-phorus(V) oxide produced is dissolved in water. It is also manufactured by the action of dilute sulphuric acid on bone-ash or phosphorite, i.e. calcium tetraoxophosphate(V). Ca3(P04)2 the insoluble calcium sulphate is filtered off and the remaining solution concentrated. In this reaction, the calcium phosphate may be treated to convert it to the more soluble dihydrogenphosphatc. CafHjPOjj. When mixed with the calcium sulphate this is used as a fertiliser under the name "superphosphate . 

Detergents are made by, for example, treating petroleum hydrocarbons with sulphuric acid, yielding sulphonated products which are water soluble. These can also solubilise fats and oils since, like the stearate ion, they have an oil-miscible hydrocarbon chain and a water-soluble ionic end. The calcium salts of these substances, however, are soiu u-ic in water and, therefore, remove hardness without scum formation. 

To prepare the potassium salt, the mixture of ethanol and sulphuric acid is boiled under reflux, cooled, and treated with an excess of calcium carbonate. 

Benzene. The analytical reagent grade benzene is satisfactory for most purposes if required dry, it is first treated with anhydrous calcium chloride, filtered, and then placed over sodium wire (for experimental details, see under Diethyl ether, 1). 

Toluene. Toluene, e from sulphur compounds, may be purchased. If required dry, it is treated with anhydrous calcium chloride, followed by sodium wire (see under Benzene, 15). 

It is prepared commercially by treating cyanamide (from calcium cyanamide) with ammonium sulphide ... 

The alcohol may be purified by conversion into the calcium chloride addition compound. Treat it with anhydrous calcium chloride much heat is evolved and the addition compound is formed. After several hours, remove any oil which has not reacted by washing with petroleum ether (b.p. 60-80°). Decompose the solid with ice water, separate the alcohol, dry and distil. 

Place an intimate mixture of 125 g. of powdered, anhydrous zinc chloride and 26-5 g. of acetophenonephenylhydrazone in a tall 500 ml. beaker in an oil bath at 170°. Stir the mixture vigorously by hand. After 3-4 minutes the mass becomes hquid and evolution of white fumes commences. Remove the beaker from the bath and stir the mixture for 5 minutes. Then stir in 100 g. of clean, white sand in order to prevent solidification to a hard mass. Digest the mixture for 12-16 hours on a water bath with 400 ml. of water and 12 ml. of concentrated hydrochloric acid in order to dissolve the zinc chloride. Filter off the sand and the crude 2-phenylindole, and boil the solids with 300 ml. of rectified spirit. Treat the hot mixture with a little decolourising carbon and filter through a pre-heated Buchner funnel wash the residue with 40 ml. of hot rectified spirit. Cool the combined filtrates to room temperature, filter off the 2-phenylindole and wash it three times with 10 ml. portions of cold alcohol. Dry in a vacuum desiccator over anhydrous calcium chloride. The yield of pure 2-phenylindole, m.p. 188-189°, is 16 g. 

Sodium test. Treat 1 ml. of the compound with a amall thin slice of freshly cut sodium (handle with the tonga or with a penknife) in a small, dry test-tube (75 X 10 mm. or 100 X 12 mm.). Observe whether hydrogen is evolved and the sodium reacts. (If the compound is suspected to contain water, dry it first with a little anhydrous calcium or magnesium sulphate.)... 

A more constrained opportunity for nitrate bioremediation arose at the US-DoE Weldon Spring Site near St. Louis, Missouri. This site had been a uranium and thorium processing faciUty, and treatment of the metal had involved nitric acid. The wastestream, known as raffinate, was discharged to surface inpoundments and neutralized with lime to precipitate the metals. Two pits had nitrate levels that requited treatment before discharge, but heavy rains in 1993 threatened to cause the pits to overflow. Bioremediation by the addition of calcium acetate as a carbon source successfully treated more than 19 million liters of water at a reasonable cost (75). 

This carbon dioxide-free solution is usually treated in an external, weU-agitated liming tank called a "prelimer." Then the ammonium chloride reacts with milk of lime and the resultant ammonia gas is vented back to the distiller. Hot calcium chloride solution, containing residual ammonia in the form of ammonium hydroxide, flows back to a lower section of the distiller. Low pressure steam sweeps practically all of the ammonia out of the limed solution. The final solution, known as "distiller waste," contains calcium chloride, unreacted sodium chloride, and excess lime. It is diluted by the condensed steam and the water in which the lime was conveyed to the reaction. Distiller waste also contains inert soHds brought in with the lime. In some plants, calcium chloride [10045-52-4], CaCl, is recovered from part of this solution. Close control of the distillation process is requited in order to thoroughly strip carbon dioxide, avoid waste of lime, and achieve nearly complete ammonia recovery. The hot (56°C) mixture of wet ammonia and carbon dioxide leaving the top of the distiller is cooled to remove water vapor before being sent back to the ammonia absorber. 

Mild exposure to HF via inhalation can irritate the nose, throat, and respiratory system. The onset of symptoms may be delayed for several hours. Severe exposure via inhalation can cause nose and throat bums, lung inflammation, and pulmonary edema, and can also result in other systemic effects including hypocalcemia (depletion of body calcium levels), which if not promptly treated can be fatal. Permissible air concentrations are (42) OSHA PEL, 3 ppm (2.0 mg/m ) as E OSHA STEL, 6 ppm (5.2 mg/m ) as E and ACGIH TLV, 3 ppm (2.6 mg/m ) as E. Ingestion can cause severe mouth, throat, and stomach bums, and maybe fatal. Hypocalcemia is possible even if exposure consists of small amounts or dilute solutions of HE. 

Ftiedel-Crafts acetylation of cyclohex ibenzene gave 4-cyclohexylacetophenone which was used as an iatermediate for the preparation of 2,4-dioxo-4-substituted-l-butanoic acid detivatives useful ia treating utinary tract calcium oxalate lithiasis (98). 

Magnesium sulfate heptahydrate may be prepared by neutralization of sulfuric acid with magnesium carbonate or oxide, or it can be obtained directly from natural sources. It occurs abundantly as a double salt and can also be obtained from the magnesium salts that occur in brines used for the extraction of bromine (qv). The brine is treated with calcium hydroxide to precipitate magnesium hydroxide. Sulfur dioxide and air are passed through the suspension to yield magnesium sulfate (see Chemicals frombrine). Magnesium sulfate is a saline cathartic. 

---