By decomposition

The lubricant oxidation mechanism is free-radical in nature and the additives act on the kinetic oxidation chain by capturing the reactive species either by decomposition of the peroxides, or by deactivation of the metal. 

Figure B2.5.7. Oscilloscope trace of the UV absorption of methyl radical at 216 mn produced by decomposition of azomethane after a shock wave (after [M]) at (a) 1280 K and (b) 1575 K.

Bromine is used in the manufacture of many important organic compounds including 1,2-dibromoethane (ethylene dibromide), added to petrol to prevent lead deposition which occurs by decomposition of the anti-knock —lead tetraethyl bromomethane (methyl bromide), a fumigating agent, and several compounds used to reduce flammability of polyester plastics and epoxide resins. Silver(I) bromide is used extensively in the photographic industry... 

Place the distillate in a separating-funnel and extract the benzonitrile twice, using about 30 ml. of ether for each extraction. Return the united ethereal extracts to the funnel and shake with 10% sodium hydroxide solution to eliminate traces of phenol formed by decomposition of the benzenediazonium chloride. Then run off the lower aqueous layer, and shake the ethereal solution with about an equal volume of dilute sulphuric acid to remove traces of foul-smelling phenyl isocyanide (CaHjNC) which are always present. Finally separate the sulphuric acid as completely as possible, and shake the ether with water to ensure absence of acid. Run off the water and dry the benzonitrile solution over granular calcium chloride for about 20 minutes. 

Acetylation of the amine may also be effected by boiling with 20 ml. of glacial acetic acid and 14 ml. of acetic anhydride for 15-20 minutes, followed by decomposition of the excess of anhydride with water and, after boiling for 5 minutes, poirring with stirring into about 75 ml. of water the product is appreciably coloured. 

Some 2-halogeno-5-nitrothiazoles and 2-nitro-5-halogenothiazoles are known. 2-Halogeno-5-nitrothiazoles can be prepared by a Sandmeyer reaction from 2-amino-5-nitrothiazole (1, 85), while 2-nitro-5-halo-genothiazoles can be analogously prepared by decomposition of dia-zonium salts arising from 2-amino-5-halogenothiazoles in presence of nitrite anion (82, 84). 

Aromatic Ring Fluorination. The formation of an aryl diazonium fluoride salt, followed by decomposition, is a classical reaction (the Schiemaim reaction) for aryl fluoride preparation (21). This method has been adapted to the production-scale manufacture of fluorobenzene [462-06-6]... 

The pressure developed by decomposition of acetylene in a closed container depends not only on the initial pressure (or more precisely, density), but also on whether the flame propagates as a deflagration or a detonation, and on the length of the container. For acetylene at room temperature and pressure, the calculated explosion pressure ratio, / initial > deflagration and ca 20 for detonation (at the Chapman-Jouguet plane). At 800 kPa (7.93... 

Sales demand for acetophenone is largely satisfied through distikative by-product recovery from residues produced in the Hock process for phenol (qv) manufacture. Acetophenone is produced in the Hock process by decomposition of cumene hydroperoxide. A more selective synthesis of acetophenone, by cleavage of cumene hydroperoxide over a cupric catalyst, has been patented (341). Acetophenone can also be produced by oxidizing the methylphenylcarbinol intermediate which is formed in styrene (qv) production processes using ethylbenzene oxidation, such as the ARCO and Halcon process and older technologies (342,343). 

In many chemiluminescent reactions of peroxides, two carbonyl groups are formed simultaneously by decomposition of an intermediate such as compound (1) ... 

Subsequent studies (63,64) suggested that the nature of the chemical activation process was a one-electron oxidation of the fluorescer by (27) followed by decomposition of the dioxetanedione radical anion to a carbon dioxide radical anion. Back electron transfer to the radical cation of the fluorescer produced the excited state which emitted the luminescence characteristic of the fluorescent state of the emitter. The chemical activation mechanism was patterned after the CIEEL mechanism proposed for dioxetanones and dioxetanes discussed earher (65). Additional support for the CIEEL mechanism, was furnished by demonstration (66) that a linear correlation existed between the singlet excitation energy of the fluorescer and the chemiluminescence intensity which had been shown earher with dimethyl dioxetanone (67). 

Basic oxides of metals such as Co, Mn, Fe, and Cu catalyze the decomposition of chlorate by lowering the decomposition temperature. Consequendy, less fuel is needed and the reaction continues at a lower temperature. Cobalt metal, which forms the basic oxide in situ, lowers the decomposition of pure sodium chlorate from 478 to 280°C while serving as fuel (6,7). Composition of a cobalt-fueled system, compared with an iron-fueled system, is 90 wt % NaClO, 4 wt % Co, and 6 wt % glass fiber vs 86% NaClO, 4% Fe, 6% glass fiber, and 4% BaO. Initiation of the former is at 270°C, compared to 370°C for the iron-fueled candle. Cobalt hydroxide produces a more pronounced lowering of the decomposition temperature than the metal alone, although the water produced by decomposition of the hydroxide to form the oxide is thought to increase chlorine contaminate levels. Alkaline earths and transition-metal ferrates also have catalytic activity and improve chlorine retention (8). 

Reactions of Vinyl Ethers. Vinyl ethers undergo the typical reactions of activated carbon—carbon double bonds. A key reaction of VEs is acid-catalyzed hydrolysis to the corresponding alcohol and acetaldehyde, ie, addition of water followed by decomposition of the hemiacetal. Eor example, for MVE, the reaction is... 

Reactions of this type ate important in high temperature metallurgical processes in which CaO, which may be produced by decomposition of CaCO, reacts with and removes acidic impurities, eg, in the pig-iron blast furnace (6). 

Cesium forms simple alkyl and aryl compounds that are similar to those of the other alkah metals (6). They are colorless, sohd, amorphous, nonvolatile, and insoluble, except by decomposition, in most solvents except diethylzinc. As a result of exceptional reactivity, cesium aryls should be effective in alkylations wherever other alkaline alkyls or Grignard reagents have failed (see Grignard reactions). Cesium reacts with hydrocarbons in which the activity of a C—H link is increased by attachment to the carbon atom of doubly linked or aromatic radicals. A brown, sohd addition product is formed when cesium reacts with ethylene, and a very reactive dark red powder, triphenylmethylcesium [76-83-5] (C H )2CCs, is formed by the reaction of cesium amalgam and a solution of triphenylmethyl chloride in anhydrous ether. 

Chemical initiation generates organic radicals, usually by decomposition of a2o (11) or peroxide compounds (12), to form radicals which then react with chlorine to initiate the radical-chain chlorination reaction (see Initiators). Chlorination of methane yields all four possible chlorinated derivatives methyl chloride, methylene chloride, chloroform, and carbon tetrachloride (13). The reaction proceeds by a radical-chain mechanism, as shown in equations 1 through. Chain initiation... 

Coppet(II) oxide [1317-38-0] CuO, is found in nature as the black triclinic tenorite [1317-92-6] or the cubic or tetrahedral paramelaconite [71276-37 ]. Commercially available copper(II) oxide is generally black and dense although a brown material of low bulk density can be prepared by decomposition of the carbonate or hydroxide at around 300°C, or by the hydrolysis of hot copper salt solutions with sodium hydroxide. The black product of commerce is most often prepared by evaporation of Cu(NH2)4C02 solutions (35) or by precipitation of copper(II) oxide from hot ammonia solutions by addition of sodium hydroxide. An extremely fine (10—20 nm) copper(II) oxide has been prepared for use as a precursor in superconductors (36). 

Hydrogen Liquefaction. Hydrogen can be produced from caustic—chlorine electrolytic cells, by decomposition of ammonia or methanol, or by steam—methane reforming. Hydrogen recovered by these methods must be further purified prior to Hquefaction. This is generally achieved by utilizing pressure swing adsorption methods whereby impurities are adsorbed on a soHd adsorbent. 

G-20 Dicarboxylic Acids. These acids have been prepared from cyclohexanone via conversion to cyclohexanone peroxide foUowed by decomposition by ferrous ions in the presence of butadiene (84—87). Okamura Oil Mill (Japan) produces a series of commercial acids based on a modification of this reaction. For example, Okamura s modifications of the reaction results in the foUowing composition of the reaction product C-16 (Linear) 4—9%, C-16 (branched) 2—4%, C-20 (linear) 35—52%, and C-20 (branched) 30—40%. Unsaturated methyl esters are first formed that are hydrogenated and then hydrolyzed to obtain the mixed acids. Relatively pure fractions of C-16 and C-20, both linear and branched, are obtained after... 

Important synthetic paths to azirines and aziridines involve bond reorganization, or internal addition, of vinylnitrenes. Indeed, the vinylnitrene-azirine equilibrium has been demonstrated in the case of trans-2-methyl-3-phenyl-l-azirine, which at 110 °C racemizes 2000 times faster than it rearranges to 2-methylindole (80CC1252). Created in the Neber rearrangement or by decomposition of vinyl azides, the nitrene can cyclize to the p -carbon to give azirines (Scheme 4 Section 5.04.4.1). 

Benzyioxycarbonyi chioride (Cbz-Ci, benzyi cbioroformate) [501-53-1] M 170.6, b 103 /20mm, d 1.195, n 1.5190. Commercial material is better than 95% pure and may contain some toluene, benzyl alcohol, benzyl chloride and HCl. After long storage (e.g. two years at 4 , Greenstein and Winitz [The Chemistry of the Amino Acids Voi 2 p. 890, J Wiley and Sons NY, 1961] recommended that the liquid should be flushed with a stream of dry air, filtered and stored over sodium sulfate to remove CO2 and HCl which are formed by decomposition. It may further be distilled from an oil bath at a temperature below 85 because Thiel and Dent [Annalen 301 257 1898] stated that benzyioxycarbonyi chloride decarboxylates to benzyl chloride slowly at 100 and vigorously at 155 . Redistillation at higher vac below 85 yields material which shows no other peaks than those of benzyioxycarbonyi chloride by NMR spectroscopy. LACHRYMATORY and TOXIC. 

---