Bismuth solubilities

In another experiment [27] NF.PA circulated bismuth with a 50-gpm centrifugal pump for 100 hr at a mean temperature of 1500°F with a temperature differential of 500°F. An accumulation in the sump of a residue high in oxide content and dissolved elements reduced the flow and forced suspension of operation. This residue probably resulted from an impure inert atmosphere above the liquid metal. The container material selected was AISI type-347 stainless steel which had shown some promi.se in bismuth solubility tests at temperatures up to 1800°F. 

Bismuth plays a significant role in reducing the melting point of Sn-Ag and Sn-Ag-X alloys, but the quantity that can be added is limited by its drastic effect on degrading fatigue life and plasticity. This is likely due to the fact that Bi is rather brittle for a metal. Bismuth solubility is limited to about 1 % in Sn-Ag-X alloys and precipitates as an elemental phase at concentrations beyond that [75]. 

Radon-222 [14859-67-7] Rn, is a naturally occuriing, iaert, radioactive gas formed from the decay of radium-226 [13982-63-3] Ra. Because Ra is a ubiquitous, water-soluble component of the earth s cmst, its daughter product, Rn, is found everywhere. A major health concern is radon s radioactive decay products. Radon has a half-life of 4 days, decayiag to polonium-218 [15422-74-9] Po, with the emission of an a particle. It is Po, an a-emitter having a half-life of 3 min, and polonium-214 [15735-67-8] Po, an a-emitter having a half-life of 1.6 x lO " s, that are of most concern. Polonium-218 decays to lead-214 [15067-28A] a p-emitter haviag = 27 min, which decays to bismuth-214 [14733-03-0], a p-emitter haviag... 

Metals less noble than copper, such as iron, nickel, and lead, dissolve from the anode. The lead precipitates as lead sulfate in the slimes. Other impurities such as arsenic, antimony, and bismuth remain partiy as insoluble compounds in the slimes and partiy as soluble complexes in the electrolyte. Precious metals, such as gold and silver, remain as metals in the anode slimes. The bulk of the slimes consist of particles of copper falling from the anode, and insoluble sulfides, selenides, or teUurides. These slimes are processed further for the recovery of the various constituents. Metals less noble than copper do not deposit but accumulate in solution. This requires periodic purification of the electrolyte to remove nickel sulfate, arsenic, and other impurities. 

Oxidation Catalysis. The multiple oxidation states available in molybdenum oxide species make these exceUent catalysts in oxidation reactions. The oxidation of methanol (qv) to formaldehyde (qv) is generally carried out commercially on mixed ferric molybdate—molybdenum trioxide catalysts. The oxidation of propylene (qv) to acrolein (77) and the ammoxidation of propylene to acrylonitrile (qv) (78) are each carried out over bismuth—molybdenum oxide catalyst systems. The latter (Sohio) process produces in excess of 3.6 x 10 t/yr of acrylonitrile, which finds use in the production of fibers (qv), elastomers (qv), and water-soluble polymers. 

Catalytic oxidation ia the presence of metals is claimed as both nonspecific and specific for the 6-hydoxyl depending on the metals used and the conditions employed for the oxidation. Nonspecific oxidation is achieved with silver or copper and oxygen (243), and noble metals with bismuth and oxygen (244). Specific oxidation is claimed with platinum at pH 6—10 ia water ia the presence of oxygen (245). Related patents to water-soluble carboxylated derivatives of starch are Hoechst s on the oxidation of ethoxylated starch and another on the oxidation of sucrose to a tricarboxyhc acid. AH the oxidations are specific to primary hydroxyls and are with a platinum catalyst at pH near neutraUty ia the presence of oxygen (246,247). Polysaccharides as raw materials ia the detergent iadustry have been reviewed (248). 

Rubidium metal alloys with the other alkaU metals, the alkaline-earth metals, antimony, bismuth, gold, and mercury. Rubidium forms double haUde salts with antimony, bismuth, cadmium, cobalt, copper, iron, lead, manganese, mercury, nickel, thorium, and 2iac. These complexes are generally water iasoluble and not hygroscopic. The soluble mbidium compounds are acetate, bromide, carbonate, chloride, chromate, fluoride, formate, hydroxide, iodide. 

Other. Insoluble alkaline-earth metal and heavy metal stannates are prepared by the metathetic reaction of a soluble salt of the metal with a soluble alkah—metal stannate. They are used as additives to ceramic dielectric bodies (32). The use of bismuth stannate [12777-45-6] Bi2(Sn02)3 5H20, with barium titanate produces a ceramic capacitor body of uniform dielectric constant over a substantial temperature range (33). Ceramic and dielectric properties of individual stannates are given in Reference 34. Other typical commercially available stannates are barium stannate [12009-18-6] BaSnO calcium stannate [12013 6-6] CaSnO magnesium stannate [12032-29-0], MgSnO and strontium stannate [12143-34-9], SrSnO. ... 

Bismuth tribromide may be prepared by dissolving Bi O in excess concentrated hydrobromic acid. The slurry formed is allowed to dry in air, then gendy heated in a stream of nitrogen to remove water, and finally distilled in a stream of dry nitrogen. Bismuth tribromide is soluble in aqueous solutions of KCl, HCl, KBr, and KI but is decomposed by water to form bismuth oxybromide [7787-57-7] BiOBr. It is soluble in acetone and ether, and practically insoluble in alcohol. It forms complexes with NH and dissolves in hydrobromic acid from which dihydrogen bismuth pentabromide tetrahydrate [66214-38-8] H2BiBr 4H2O, maybe crystallized at —lO C. 

Bismuth ttiiodide may be prepared by beating stoichiometric quantities of the elements in a sealed tube. It undergoes considerable decomposition at 500°C and is almost completely decomposed at 700°C. However, it may be sublimed without decomposition at 3.3 kPa (25 mm Hg). Bismuth ttiiodide is essentially insoluble in cold water and is decomposed by hot water. It is soluble in Hquid ammonia forming a red triammine complex, absolute alcohol (3.5 g/100 g), benzene, toluene, and xylene. It dissolves in hydroiodic acid solutions from which hydrogen tetraiodobismuthate(Ill) [66214-37-7] HBil 4H2O, may be crystallized, and it dissolves in potassium iodide solutions to yield the red compound, potassium tetraiodobismuthate(Ill) [39775-75-2] KBil. Compounds of the type tripotassium bismuth hexaiodide [66214-36-6] K Bil, are also known. 

Bismuth subcarbonate [5892-10 ] (basic bismuth carbonate) is a white or pale yellow powder that is prepared by interaction of bismuth nitrate and a water-soluble carbonate. The exact composition of this dmg depends on the conditions of precipitation it corresponds approximately to the formula (Bi0)2C02. It has been widely used as an antacid (183). 

A method for the estimation of the total alkaloids and of non-phenolic alkaloids (emetine fraction) is given in the British Pharmacopoeia, 1932, Addendum VI, which requires the drug to contain not less than 2 per cent, of alkaloids, of which at least 55 per cent, must be non-phenolic bases, calculated as emetine. The British Pharmacopoeia also gives an assay process for emetine in emetine bismuth iodide, the form in which the drug is chiefly used in medicine it is required to contain not less than 25 and not more than 28 per cent, of emetine. In the United States Pharmacopoeia, XIII, both Cephcelis Ipecacuanha and C. acuminata are recognised and must contain not less than 2 per cent, of ether-soluble alkaloids. 

HaO). Quinine salicylate, 2[B. CgH4(OH)(COOH)]. HaO, forms colourless needles, m.p. 187° (dec.), which slowly become pink in air. It is soluble in water (1 in 77 at 25°), alcohol (1 in 11 at 25°), or chloroform (1 in 37 at 25°). The foregoing are the most important quinine salts used in medicine, but many other salts have been used, e.g., the tannate, formate, valerate, ethylcarbonate, lactate, cacodylate, etc., as well as double salts such as quinine bismuth iodide. Descriptions of many of these salts will be found in the British Pharmaceutical Codex for 1934. 

A mixture of 2.33 g of bismuth oxide (BijOa), 3.71 g of anhydrous sodium carbonate, and 7.64 g of triglycollamic acid and 40 cc of water was heated at B0°C on the water bath until all was dissolved. The solution was avaporated on the water bath to a syrup. The syrup was allowed to cool, during which time partial solidification occurred. It was then triturated with 300 cc of alcohol, and the solid anhydrous salt was collected on a filter, washed with alcohol, ground fine, and dried in a vacuum desiccator. This substance has a water solubility at 25°C of 31 S% by weight. It decomposes on heating in the melting point bath. 

Determination of copper as copper(I) thiocyanate Discussion. This is an excellent method, since most thiocyanates of other metals are soluble. Separation may thus be effected from bismuth, cadmium, arsenic, antimony, tin, iron, nickel, cobalt, manganese, and zinc. The addition of 2-3 g of tartaric acid is desirable for the prevention of hydrolysis when bismuth, antimony, or tin is present. Excessive amounts of ammonium salts or of the thiocyanate precipitant should be absent, as should also oxidising agents the solution should only be slightly acidic, since the solubility of the precipitate increases with decreasing pH. Lead, mercury, the precious metals, selenium, and tellurium interfere and contaminate the precipitate. 

The reaction is a sensitive one, but is subject to a number of interferences. The solution must be free from large amounts of lead, thallium (I), copper, tin, arsenic, antimony, gold, silver, platinum, and palladium, and from elements in sufficient quantity to colour the solution, e.g. nickel. Metals giving insoluble iodides must be absent, or present in amounts not yielding a precipitate. Substances which liberate iodine from potassium iodide interfere, for example iron(III) the latter should be reduced with sulphurous acid and the excess of gas boiled off, or by a 30 per cent solution of hypophosphorous acid. Chloride ion reduces the intensity of the bismuth colour. Separation of bismuth from copper can be effected by extraction of the bismuth as dithizonate by treatment in ammoniacal potassium cyanide solution with a 0.1 per cent solution of dithizone in chloroform if lead is present, shaking of the chloroform solution of lead and bismuth dithizonates with a buffer solution of pH 3.4 results in the lead alone passing into the aqueous phase. The bismuth complex is soluble in a pentan-l-ol-ethyl acetate mixture, and this fact can be utilised for the determination in the presence of coloured ions, such as nickel, cobalt, chromium, and uranium. 

A remedy could be achieved by a decrease in the zinc solubility in the electrolyte or by suppression of dendrite formation cadmium-, lead-, or bismuth oxide,... 

The equilibrium constant for the solubility equilibrium between an ionic solid and its dissolved ions is called the solubility product, Ksp, of the solute. For example, the solubility product for bismuth sulfide, Bi2S3, is defined as... 

But first the synthesis had to come John was interested in reduced metal halides, particularly for the post-transition metals cadmium, galHum, and bismuth (his Ph.D. dissertation was on anhydrous aluminum halides and mixed halide intermediates, a good start for what was to come ). However, he was not yet actively interested in rare-earth metals and their remarkable solubility in their halides. But these elements lured him one floor below where Adrian Daane headed the metallurgy section of Spedding s empire. He knew how to produce rare-earth metals with high purity and in sufficient quantity and also how to handle tantalum containers. What if one gave it a tr/ and reduced some rare-earth metal halides (John insists that this term is used correctly) from their respective metals at high temperatures under appropriate conditions. 

According to these previous studies, the most dominant dissolved states of Au and Ag in ore fluids are considered to be bisulfide and chloride complexes, depending on the chemistry of ore fluid (salinity, pH, redox state, etc.). However, very few experimental studies of Au solubility due to chloride complex and Ag solubility due to bisulfide complexes under hydrothermal conditions of interest here have been conducted. Thus, it is difficult to evaluate the effects of these important species on the Ag/Au of native gold and electrum. Other Au and Ag complexes with tellurium, selenium, bismuth, antimony, and arsenic may be stable in ore fluids but are not taken into account here due to the lack of thermochemical data. 

Widespread medicinal use of colloidal bismuth subcitrate (CBS) has prompted extensive studies of bismuth compounds involving the citrate anion. Bismuth citrate is essentially insoluble in water, but a dramatic increase in solubility with increasing pH has been exploited as a bio-ready source of soluble bismuth, a material referred to as CBS. Formulation of these solutions is complicated by the variability of the bismuth anion stoichiometry, the presence of potassium and/ or ammonium cations, the susceptibility of bismuth to oxygenation to Bi=0, and the incorporation of water in isolated solids. Consequently, a variety of formulas are classified in the literature as CBS. Solids isolated from various, often ill-defined combinations of bismuth citrate, citric acid, potassium hydroxide, or ammonium hydroxide have been assigned formulas on the basis of elemental analysis data or by determination of water and ammonia content, but are of low significance in the absence of complementary data other than thermal analysis (163), infrared spectroscopy (163), or NMR spectroscopy (164). In this context, the Merck index lists the chemical formula of CBS as KgfNHJaBieOafOHMCeHsCbh in the 11th edition (165), but in the most recent edition provides a less precise name, tripotassium dicitrato bismuthate (166). 

Betterton-Kroll A metallurgical process for removing bismuth from lead. Metallic calcium and magnesium are added to the molten lead, causing precipitation of the sparingly soluble CaMgBi2. 

---