Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Biodiesel fuels ASTM specifications

The Biodiesel Stability (BIOSTAB) project, supported by the European Commission, was initiated in 2001 to establish clear criteria and analytical methods for the monitoring biodiesel fuel stability (Various, 2003 Prankl, 2002). The resulting unified method, EN 14112 (Anon., 2003c) established a means for measuring oxidative stability utilizing the Rancimat or oxidation stability instruments. This test method was essentially developed from standards employed in the fats and oils industry to measure isothermally the induction period for oxidation of fatty derivatives. At present, both biodiesel fuel standards ASTM D 6751 (Anon., 2007a) and EN 14214 (Anon., 2003b) include an oxidative stability specification based on measurement by method EN 14112. [Pg.29]

Anon. 2007a. D 6751-06b Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels. In Annual Book of ASTM Standards (05.04). West Conshohocken PA ASTM International. [Pg.45]

Standard specification for biodiesel fuel (BlOO) blend stock for distillate fuels, ASTM Standards D-6751,. ... [Pg.3231]

ASTM International, ASTM D 6751 Standard Specification far Biodiesel Fuel Blendstock (BlOO) for Middle Distillate Fuels. ASTM International, Conshohocken, PA, USA. [Pg.1482]

ASTM, 2000c. D4860 Free water and particulate contamination in middle distillate fuels. In V. A. Mayer (ed.). Annual Book of ASTM Standards, Section 5, Petroleum Products and Lubricants, Vol. 05.02. Philadelphia, American Society for Testing and Materials, pp. 1113-1118. ASTM, 2000d. PS 121 Provisional specifications for biodiesel fuel (BlOO) blend stock for distillate fuels. In V. A. Mayer (ed.). Annual Book of ASTM Standards, Section 5, Petroleum Products and Lubricants, Vol. 05.04. Philadelphia, American Society for Testing and Materials,... [Pg.200]

ASTM ASTM D 6751. Standard specification for biodiesel fuel blend stock (B100) for middle distUate fuels. ASTM International. West Conshohocken P... [Pg.464]

The American Society for Testing and Materials (ASTM) initiated a Biodiesel Task Force in June 1994 to develop a specification for vegetable ester fuels for use in diesel-engine-powered vehicles. When completed, this specification for vegetable ester fuels will be the analog of ASTM D 975, the specification for petroleum-based diesel fuel. [Pg.71]

Grade = petrodiesel grade according to ASTM fuel specification D 975 Ratio = blend ratio where B0 = 0vol% biodiesel, B10 = 10%, B20 = 20% and B30 = 30%. See Table 1.3 for other abbreviations. [Pg.14]

ASTM Standard specification for diesel fuel oU, biodiesel blend (B6 to B20). 2008. In Annual Book of ASTM Standards, ASTM International, West Conshohocken, Method D7467-08a. [Pg.239]

The specifications for biodiesel are designed to ensure that consumers will not experience operational problems from the fuel s use. ASTM and European Union have standard specifications designed for BlOO FAME used in biodiesel blending, which include GC (gas chromatographic analysis), elemental analysis, as well as physicochemical properties of the produced biodiesel [3,4]. Quality fuel will provide the consumer with improved air quality and enhanced operability. Poor quality fuel will create operability problems and increased maintenance activity. It is really necessary to look for newer approaches for the production of biodiesel particularly for variable quality feed stock employing nonedible oils or used flying oils. [Pg.439]

See other pages where Biodiesel fuels ASTM specifications is mentioned: [Pg.29]    [Pg.518]    [Pg.180]    [Pg.222]    [Pg.17]    [Pg.36]    [Pg.142]    [Pg.39]    [Pg.40]    [Pg.3215]    [Pg.123]   
See also in sourсe #XX -- [ Pg.337 , Pg.338 ]



SEARCH



ASTM

ASTM specifications

Biodiesel

Biodiesel fuel

Fuel specifications

Specifications, biodiesel

© 2024 chempedia.info