Barium reaction with water

The barium crowns are usually broken into smaller pieces and can be sold in this form or cast or extmded into bars or wire. Usually the metal is packaged in argon-fiked plastic bags inside argon-fiked steel containers. Barium is classed as a flammable soHd and cannot be mailed. It should be stored in a wek-ventilated area so as to remove any hydrogen formed through reaction with water vapor. It should not be stored where contact with water is possible. 

Write a balanced chemical equation for (a) the hydrogenation of ethyne (acetylene, C2H2) to ethene (C2H4) by hydrogen (give the oxidation number of the carbon atoms in the reactant and product) (b) the shift reaction (sometimes called the water gas shift reaction, WGSR) (c) the reaction of barium hydride with water. 

Barium reacts with water according to the above reaction. What volume of hydrogen gas, at standard temperature and pressure, is produced from 0.400 mol of barium ... 

Caution The following reactions can proceed explosively Calculate the number of moles of hydrogen that can be produced by reaction with water of (a) 0.600 g of lithium and (b) 0.600 g of barium, (c) Explain the difference. 

Calcium, strontium, and barium react vigorously at 25°C. The less easily oxidized beryllium and magnesium show no observable reaction with water at 25°C, although magnesium reacts with boiling water. Table 18.7 summarizes various properties, sources, and preparations of the alkaline earth metals. 

The corrosive liquid is the hydroxide of the metal in the compound. The heat produced may be sufficient to ignite nearby combustible materials. Metal peroxides may also decompose when exposed to heat, with results similar to their reaction with water. The hazards and physical and chemical characteristics of metal peroxides are similar. Sodium peroxide and barium peroxide are common metal peroxides and are detailed in the following paragraphs. Keep in mind that they are not the only metal peroxides. 

Write balanced equations for the following reactions (a) barium oxide with water, (b) iron(II) oxide with perchloric acid, (c) sulfur trioxide with vrater, (d) carbon dioxide with aqueous sodium hydroxide. 

CH OfiSj, H2C(S03H)2- a colourless, crystalline solid which readily absorbs water vapour decomposes on distillation. The potassium salt is prepared by heating methylene chloride with an aqueous solution of potassium sulphite under pressure at 150-I60" C. The free acid is obtained by decomposing the sparingly soluble barium salt with sulphuric acid. The aryl esters are very stable, but the alkyl esters decompose on heating to give ethers. Resembles malonic acid in some of its reactions. 

Barium fluoride [7782-32-8] Bap2, is a white crystal or powder. Under the microscope crystals may be clear and colorless. Reported melting points vary from 1290 (1) to 1355°C (2), including values of 1301 (3) and 1353°C (4). Differences may result from impurities, reaction with containers, or inaccurate temperature measurements. The heat of fusion is 28 kj/mol (6.8 kcal/mol) (5), the boiling point 2260°C (6), and the density 4.9 g/cm. The solubiUty in water is about 1.6 g/L at 25°C and 5.6 g/100 g (7) in anhydrous hydrogen fluoride. Several preparations for barium fluoride have been reported (8—10). 

Barium metal and most barium compounds are highly poisonous. A notable exception is barium sulfate which is nontoxic because of its extreme iasolubihty ia water. Barium ion acts as a muscle stimulant and can cause death through ventricular fibrillation of the heart. Therefore, care must be taken to avoid contact with open areas of the skin. Workers must wear respirators (of type approved for toxic airborne particles), goggles, gloves, and protective clothing at all times. The toxic barium aluminate residue obtained from barium production is detoxified by reaction with a solution of ferrous sulfate and converted iato nontoxic barium sulfate. According to OSHA standards, the TWA value for Ba and Ba compounds ia air is 0.5 mg/m. ... 

Barium nitrite [13465-94-6] Ba(N02)2, crystallines from aqueous solution as barium nitrite monohydrate [7787-38-4], Ba(N02)2 H2O, which has yellowish hexagonal crystals, sp gr 3.173, solubihty 54.8 g Ba(NO2)2/100 g H2O at 0°C, 319 g at 100°C. The monohydrate loses its water of crystallization at 116°C. Anhydrous barium nitrite, sp gr 3.234, melts at 267°C and decomposes at 270 °C into BaO, NO, and N2. Barium nitrite may be prepared by crystallization from a solution of equivalent quantities of barium chloride and sodium nitrite, by thermal decomposition of barium nitrate in an atmosphere of NO, or by treating barium hydroxide or barium carbonate with the gaseous oxidiation products of ammonia. It has been used in diazotization reactions. 

Barium sulfate [7727-43-7] BaSO, occurs as colorless rhombic crystals, mp 1580 °C (dec) sp gr 4.50 solubihty 0.000285 g/100 g H2O at 30°C and 0.00118 at 100°C. It is soluble in concentrated sulfuric acid, forming an acid sulfate dilution with water reprecipitates barium sulfate. Precipitated BaSO is known as blanc fixe, prepared from the reaction of aqueous solutions of barium sulfide and sodium sulfate. 

Ethyl chloride can be dehydrochlorinated to ethylene using alcohoHc potash. Condensation of alcohol with ethyl chloride in this reaction also produces some diethyl ether. Heating to 625°C and subsequent contact with calcium oxide and water at 400—450°C gives ethyl alcohol as the chief product of decomposition. Ethyl chloride yields butane, ethylene, water, and a soHd of unknown composition when heated with metallic magnesium for about six hours in a sealed tube. Ethyl chloride forms regular crystals of a hydrate with water at 0°C (5). Dry ethyl chloride can be used in contact with most common metals in the absence of air up to 200°C. Its oxidation and hydrolysis are slow at ordinary temperatures. Ethyl chloride yields ethyl alcohol, acetaldehyde, and some ethylene in the presence of steam with various catalysts, eg, titanium dioxide and barium chloride. 

Alkaline Hydrolysis of Kasugamycinic Acid (9a) with Barium Hydroxide. Kasugamycinic acid (250 mg., 0.63 mmole) was hydrolyzed with barium hydroxide-saturated-water at 100°C. for 10 hours, and the reaction mixture was treated in the similar manner as described in the case of alkaline hydrolysis of kasugamycin, affording kasuganobiosamine (4) (179 mg., 0.68 mmole) and barium oxalate (151 mg., 0.62 mmole). 

For best results the commercial triethylamine (Matheson, b.p. 89-90°) should be purified to remove primary and secondary amines and water, either by distillation from acetic anhydride and then from barium oxide, or by reaction with phenyliso-cyanate.5 2 3 4... 

How many grams of barium hydroxide will be used up in the reaction with hydrogen chloride (hydrochloric acid) to produce 45.00g of barium chloride plus some water ... 

Cyclododecene may be prepared from 1,5,9-cyclododecatriene by the catalytic reduction with Raney nickel and hydrogen diluted with nitrogen, with nickel sulfide on alumina, with cobalt, iron, or nickel in the presence of thiophene, with palladium on charcoal, with palladimn chloride in the presence of water, with palladium on barium sulfate, with cobalt acetate in the presence of cobalt carbonyl, and with cobalt carbonyl and tri- -butyl phosphine. It may also be obtained from the triene by reduction with lithium and ethylamine, by disproportionation, - by epoxidation followed by isomerization to a ketone and WoliT-Kishner reduction, and from cyclododecanone by the reaction of its hydrazone with sodium hydride. ... 

Barium metal reacts exothermically with oxygen at ambient temperatures forming harium oxide. The reaction is violent when the metal is present in powder form. It also reacts violently with water forming harium hydroxide and liberating hydrogen ... 

---