Aromatic with acetic anhydride

Acetyl derivatives of aromatic amines may be prepared either witli acetic anhydride or acetic acid or with a mixture of both reagents. Primary amines react readily upon warming with acetic anhydride to yield, in the first instance, the mono-acetyl derivative, for example ... 

Since the avermectins exhibit unprecedented potency, they are used at unusually low doses of 6 —300 )-lg/kg, which makes the detection and isolation of residues and metaboUtes from animal tissue a new challenge. For this reason a sensitive analytical assay requires a derivative suitable for detection at concentrations down to 1/10 or 1/100 of one ppm. Ivermectin and avermectin B are therefore converted into an aromatic derivative which allows detection by fluorescence absorbance. To achieve this derivatization, avermectin B, ivermectin, or their derivatives are heated with acetic anhydride in pyridine at 100°C for 24 h (30). The reaction time can be reduced to 1 h by using /V-methylimidazole as a catalyst (31). The resultant... 

A Methylanthrapyridone and Its Derivatives. 6-Bromo-3-methylanthrapyridone [81-85-6] (75) is an important iatermediate for manufacturiag dyes soluble ia organic solvents. These solvent dyes are prepared by replacing the bromine atom with various kiads of aromatic amines. 6-Bromo-3-methylanthrapyridone is prepared from 1-methyl amino-4-bromoanthra quin one (43) by acetylation with acetic anhydride followed by ring closure ia alkaU. The startiag material of this route is anthraquiaoae-l-sulfonic acid (16). 

Hydrazinopyridazines are easily formylated with formic acid or ethyl formate and acety-lated with acetic anhydride. A-Pyridazinylthiosemicarbazides are obtained from thiocyanates or alkyl- and aryl-isothiocyanates. Hydrazinopyridazines condense with aliphatic and aromatic aldehydes and ketones to give hydrazones. 

It was found inadvisable to use more than four molecules of form-amide [ (47) when R = H] per molecule of anthranilic acid and the condensation produces best results when the mixture is heated at 120 -130°C for 2 hr followed by further heating at 170°-180 C for 2 hr. Other variants of this reaction involve the use of ammonium o-acylaminobenzoates, anthranilic acid in the presence of nitriles and acetic anhydride, o-acetamidonitrile with acetic anhydride or hydrogen peroxide, anthranilic esters and aliphatic or aromatic amides or amidines, isatoic anhydride with amides or amidines, and anthranilic esters with aryl iminochlorides in acetoned The mechanism proposed by Bogert and Gotthelf has had experimental supporR and is represented in Scheme 12. 

Trimethyloxazolo[4,5-/]quinoline prepared from 2,7-dimethyl-6-methoxyquinoline using nitration, demethylation (or reversed), reduction, and cy-clization with acetic anhydride confirms unambigously the structure of the aromatic part of the antibiotic X-537A after nitration and alkaline degradation (71JOC3621). 

In some cases the effect of the nature of aromatic hydrogen substituent has been also observed (Table 48.2). These results contrast with those obtained using typical homogeneous Bronsted acid catalysts (e.g., sulphuric) for the acylation of the same substrate with acetic anhydride, under the same experimental conditions, where the yields (98%, 95%, 91% for R=N02, H, OMe, respectively) do not significantly depend on the nucleophile s substituent nature [23]. These data imderline the contribution of the heterogeneous catalyst. 

Among the wide variety of organic reactions in which zeolites have been employed as catalysts, may be emphasized the transformations of aromatic hydrocarbons of importance in petrochemistry, and in the synthesis of intermediates for pharmaceutical or fragrance products.5 In particular, Friede 1-Crafts acylation and alkylation over zeolites have been widely used for the synthesis of fine chemicals.6 Insights into the mechanism of aromatic acylation over zeolites have been disclosed.7 The production of ethylbenzene from benzene and ethylene, catalyzed by HZSM-5 zeolite and developed by the Mobil-Badger Company, was the first commercialized industrial process for aromatic alkylation over zeolites.8 Other typical examples of zeolite-mediated Friedel-Crafts reactions are the regioselective formation of p-xylene by alkylation of toluene with methanol over HZSM-5,9 or the regioselective p-acylation of toluene with acetic anhydride over HBEA zeolites.10 In both transformations, the p-isomers are obtained in nearly quantitative yield. 

The aromatic character of triazoloindole 62 has been evidenced by its ability to enter into electrophilic substitution reactions, for instance with acetic anhydride, leading to the acetylated derivative 63 <2002CHE1019> (Scheme 1). 

The acetylation over protonic zeolites of aromatic substrates with acetic anhydride was widely investigated. Essentially HFAU, HBEA, and HMFI were used as catalysts, most of the reactions being carried out in batch reactors, often in the presence of solvent. Owing to the deactivation effect of the acetyl group, acetylation is limited to monoacetylated products. As could be expected in electrophilic substitution, the reactivity of the aromatic substrates is strongly influenced by the substituents, for example, anisole > m-xylene > toluene > fluorobenzene. Moreover, with the poorly activated substrates (m-xylene, toluene, and fluoroben-zene) there is a quasi-immediate inhibition of the reaction. It is not the case with activated substrates such as anisole and more generally aromatic ethers. It is why we have chosen the acetylation of anisole and 2-methoxynaphtalene as an example. 

It is generally admitted that over zeolites, acetylation of aromatic substrates with acetic anhydride (AA) is catalyzed by protonic acid sites. The direct participation of Lewis sites was excluded by using two BEA samples with similar protonic acidities, but with very different Lewis acidities indeed, these samples were shown to have quasi-similar activities. The currently accepted mechanism is shown in Figure 12.6 for the anisole acetylation example. The limiting step of the process is the attack of anisole molecules by acylium ions. 

The main problem encountered during electrophilic substitution reactions of aromatic amines is that of their veiy high reactivity. Substitution tends to occur at ortho- and para-positions. If we have to prepare monosubstituted aniline derivative, how can the activating effect of -NH group be controlled This can be done by protecting the -NH group by acetylation with acetic anhydride, then carrying out the desired substitution followed by hydrolysis of the substituted amide to the substituted amine. 

Formylfuran behaves in a very similar manner to benzaldehyde and undergoes the usual reactions of an aromatic aldehyde, e.g. (i) the Cannizzaro reaction with cone, sodium hydroxide to give furan-2-ylmethanol and the sodium salt of furoic acid, (ii) the Perkin reaction with acetic anhydride and sodium acetate to yield an aldol product that dehydrates to 3-(furan-2-yl)propenoic acid, and (iii) a condensation with potassium cyanide in alcoholic solution to form furoin (under these conditions, benzaldehyde undergoes the benzoin condensation) (Scheme 6.32). 

In this paper we report the use of supported heteropoly acid (silicotungstic acid) and supported phosphoric acid catalysts for the acylation of industrially relevant aromatic feedstocks with acid anhydrides in the synthesis of aromatic ketones. In particular, we describe the acylation of thioanisole 1 with iso-butyric anhydride 2 to form 4-methyl thiobutyrophenone 3. The acylation of thioanisole with acetic anhydride has been reported in which a series of zeolites were used as catalysts. Zeolite H-beta was reported to have the highest activity of the zeolites studied (41 mol % conversion, 150°C) (2). 

Monomers 111 (a -d), were prepared from the common starting material 15 by a potassium phenate displacement of the aromatic nitro group. The yields of the keto-ether amine products ranged from 90 to 100% and were of sufficient purity after extractive work up to be utilized directly in the synthesis of the various maleimide monomers. Imidization of the aminobenzocyclobutenes was accomplished using standard reaction conditions (maleic anhydride to form the amic acid followed by cyclodehydration with acetic anhydride and triethyla-mine) and provided the maleimide products in yields ranging from 60 to 90%. 

With aromatic aldehydes instead of formaldehyde, analogous bis-thio-coumarinyl derivatives (32) are formed, which undergo dehydration with acetic anhydride to give the pentacyclic systems 33. Some aldehydes... 

Reaction of compound (57) with acetic anhydride is reported to give the N- rather than the O-acetylated product (73JHC1081). The dihydro compound (58) undergoes aromatization on reaction with p-chloranil in refluxing xylene <75JCS(P1)1326). 

An interesting reaction is that of the mononuclear [W(CO)5(SH)] and the SH- -bridged dinu-clear /i-HS W(CO)s complexes with acetic anhydride to give the thioacetate complex [(MeCOS)W(CO)5]. The SH complexes react with aliphatic ketones and aromatic aldehydes to yield the complexes [(R2C=S)W(CO)5] and [(RCHS)W(CO)s] of these otherwise unstable thioketones and thioaldehydes.142... 

---